Component guide · Intermediate · 4 min read
Meskernel Laser Distance Sensors

LDL, LDK, LDJ Phase and PTFS, PTFG, TC25, TS1224 Pulse) and FNIRSI IR40 Rangefinder
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Meskernel modules are the measuring engines of laser tape measures. Phase-shift models (LDL, LDK, LDJ) use a visible red laser and reach about 10 to 150 m with plus or minus 1 to 3 mm accuracy at a few readings per second. Pulse models (PTFS, PTFG, TC25, TS1224) use 905 nm lasers to reach hundreds of metres to 1.5 km. They talk TTL UART, RS232 or RS485 with USB adapters included.
Key specs at a glance
- Phase range
- 10 m (LDL-10) to 150 m (LDJ-150)
- Phase accuracy
- About plus or minus 1 to 3 mm
- Pulse range
- 100 m to 1500 m
- Rate
- About 3 to 20 Hz (phase), up to 500 Hz (PTFS-H)
- Interface
- TTL UART, RS232 or RS485 (USB adapter versions)
- Laser
- Visible red (phase) or 905 nm Class 1 (pulse)
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Meskernel LDL-10 Laser Distance Sensor (1mm Accuracy, 10m Range) USB to TTL₹8,659
Option 2Meskernel LDL-20 High Accuracy Phase Distance Sensor (Red Visible Laser) – RS485/USART Interface₹11,399
Option 3Meskernel LDL-20 High Accuracy Phase Distance Sensor (Red Visible Laser) – USART/RS232/RS485 Interface₹10,589
Option 4Meskernel LDL-40 Red Visible Laser Precision Range Sensor (40m) – USB to TTL₹9,719
Option 5Meskernel LDK-40 Laser Range Sensor (40m) USB to TTL₹10,781
Option 6Meskernel LDK-60 Laser Range Sensor, 60 m, 3 Hz₹8,755
What the Meskernel laser distance sensors is
Meskernel laser distance sensors are industrial laser rangefinder modules that measure up to 40 to 100 m with millimetre accuracy over UART, RS485 or analog outputs.
Phase sensors are very accurate but slow and need a reasonably reflective target. Pulse sensors are fast and long but less precise, about plus or minus 0.5 to 1 m at long range.
Commands are short binary or ASCII strings listed in each manual: single measurement, continuous mode, laser on and off.
Meskernel laser distance sensors pinout
The pins on the Meskernel laser distance sensors and what each one does.
| Pin | Function |
|---|---|
| VCC / GND | Power, usually 3.3 V or 5 V |
| TX / RX | UART |
| Adapter | USB to TTL, RS232 or RS485 |
- VCC / GND
- Power, usually 3.3 V or 5 V
- TX / RX
- UART
- Adapter
- USB to TTL, RS232 or RS485
Wiring the Meskernel laser distance sensors
Check the module voltage: some phase modules are 3.3 V only.
| Meskernel laser distance sensors pin | Arduino Uno | ESP32 |
|---|---|---|
| Red (VCC) | 5 V | 5 V (VIN) |
| Black (GND) | GND | GND |
| Sensor TX | D10 (SoftwareSerial RX) | GPIO 16 (RX2) |
| Sensor RX | D11 | GPIO 17 (TX2) |
- Red (VCC)
- Arduino Uno:
- 5 V
- ESP32:
- 5 V (VIN)
- Black (GND)
- Arduino Uno:
- GND
- ESP32:
- GND
- Sensor TX
- Arduino Uno:
- D10 (SoftwareSerial RX)
- ESP32:
- GPIO 16 (RX2)
- Sensor RX
- Arduino Uno:
- D11
- ESP32:
- GPIO 17 (TX2)
Example code
Command bytes differ between series. Copy the single-measurement command for your model from its manual.
import serial
s = serial.Serial("/dev/ttyUSB0", 9600, timeout=2) # baud per model
CMD = bytes.fromhex("AA 00 00 20 00 01 00 00 21") # example single-shot; copy yours from the manual
s.write(CMD)
reply = s.read(13)
print(reply.hex(" ")) # decode the distance bytes as the manual describesSetup and tuning
check the module voltage, typically 3.3 V or 5 to 24 V for industrial versions.
use TTL UART, RS232, RS485 or 4 to 20 mA per model; send commands as in the manual.
best on matte light surfaces; use a reflector plate for long range.
usually Class 2; never look into the beam.
choose fast or accurate mode in the commands.
What you need
Shop this list20 of 20 found in our store · ₹2,18,478
Meskernel LDL-10 Laser Distance Sensor (1mm Accuracy, 10m Range) USB to TTL: the part this guide coversMeskernel LDL-10 Laser Distance Sensor (1mm Accuracy, 10m Range) USB to TTL₹8,659
Meskernel LDL-20 High Accuracy Phase Distance Sensor (Red Visible Laser) – RS485/USART Interface: another version this guide coversMeskernel LDL-20 High Accuracy Phase Distance Sensor (Red Visible Laser) – RS485/USART Interface₹11,399
Meskernel LDL-20 High Accuracy Phase Distance Sensor (Red Visible Laser) – USART/RS232/RS485 Interface: another version this guide coversMeskernel LDL-20 High Accuracy Phase Distance Sensor (Red Visible Laser) – USART/RS232/RS485 Interface₹10,589
Meskernel LDL-40 Red Visible Laser Precision Range Sensor (40m) – USB to TTL: another version this guide coversMeskernel LDL-40 Red Visible Laser Precision Range Sensor (40m) – USB to TTL₹9,719
Meskernel LDK-40 Laser Range Sensor (40m) USB to TTL: another version this guide coversMeskernel LDK-40 Laser Range Sensor (40m) USB to TTL₹10,781
Meskernel LDK-60 Laser Range Sensor, 60 m, 3 Hz: another version this guide coversMeskernel LDK-60 Laser Range Sensor, 60 m, 3 Hz₹8,755
Meskernel LDK-80 Laser Range Sensor (0.03-80m, ±2mm) USB to TTL: another version this guide coversMeskernel LDK-80 Laser Range Sensor (0.03-80m, ±2mm) USB to TTL₹11,999
Meskernel LDJ-150 High Accuracy Phase Distance Sensor (LDJ Series Red Visible Laser) USB to RS485: another version this guide coversMeskernel LDJ-150 High Accuracy Phase Distance Sensor (LDJ Series Red Visible Laser) USB to RS485₹13,569
Meskernel LDJ-150 High Accuracy Phase Distance Sensor (LDJ Series Red Visible Laser) – USB to TTL: another version this guide coversMeskernel LDJ-150 High Accuracy Phase Distance Sensor (LDJ Series Red Visible Laser) – USB to TTL₹13,399
Meskernel PTFG-1500 Long Distance Pulse Laser Sensor – USB to RS485: another version this guide coversMeskernel PTFG-1500 Long Distance Pulse Laser Sensor – USB to RS485₹20,999
Meskernel PTFG-1500 Long Distance Pulse Laser Sensor – USB to TTL Interface: another version this guide coversMeskernel PTFG-1500 Long Distance Pulse Laser Sensor – USB to TTL Interface₹22,329
Meskernel PTFS Long-Range Laser Distance Module: another version this guide coversMeskernel PTFS Long-Range Laser Distance Module₹10,650
Meskernel PTFS-H Pulsed Laser Distance Sensor, Range: 3M~100m, 500Hz, 905nm (TTL To USB): another version this guide coversMeskernel PTFS-H Pulsed Laser Distance Sensor, Range: 3M~100m, 500Hz, 905nm (TTL To USB)₹18,979
Meskernel TC25 Pulsed Laser Distance Sensor, 3M-1000m Range, 905nm, USB to TTL: another version this guide coversMeskernel TC25 Pulsed Laser Distance Sensor, 3M-1000m Range, 905nm, USB to TTL₹16,799
Meskernel TS1224 1500M Laser Measurement Module – USB to TTL Interface, 905nm Class 1: another version this guide coversMeskernel TS1224 1500M Laser Measurement Module – USB to TTL Interface, 905nm Class 1₹26,249
FNIRSI IR40 Smart Laser Rangefinder – Bluetooth App Sync, 0.05-40m Range, ±2mm Accuracy: another version this guide coversFNIRSI IR40 Smart Laser Rangefinder – Bluetooth App Sync, 0.05-40m Range, ±2mm Accuracy₹2,879
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389
USB to TTL serial converter: to talk to the module from a PCUSB to TTL Serial Converter (CH340G / CP2102 / FT232RL / PL2303)₹85Closest match, check the specs
USB to RS485 converter adapter: to test RS485 versions from a PCUSB to RS485 Converter Adapter₹74
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Alternatives and when to choose them
- Laser rangefinder modules: overview.
- Benewake TF03: fast LiDAR.
- PONO sensors: industrial ToF.
Common mistakes to avoid
- Looking into the beam.
- Measuring dark glossy surfaces at long range.
- Wrong voltage.
- Mixing up RS232 and TTL levels.
Frequently asked questions
How far can Meskernel sensors measure?
Typically 40 to 100 m on suitable targets, depending on model.
How accurate are they?
About ±1 to 3 mm on good targets in normal light.
Can I read it with Arduino?
Yes. Send the command bytes over UART and parse the distance from the reply.
Why does it fail on dark targets?
Dark surfaces reflect little light, so add a reflector plate or a light target.
Is the laser safe?
It is usually Class 2, so do not stare into it.
Parts for this guide
- ₹8,659View
- ₹11,399View
Meskernel LDL-20 High Accuracy Phase Distance Sensor (Red Visible Laser) – USART/RS232/RS485 Interface₹10,589View- ₹9,719View
- ₹10,781View
- ₹8,755View
- ₹11,999View
- ₹13,569View
- ₹13,399View
- ₹20,999View
- ₹22,329View
- ₹10,650View
- ₹18,979View
- ₹16,799View
- ₹26,249View
- ₹2,879View
- ₹389View
- ₹85View
- ₹74View
- ₹177View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
