Comparison · Intermediate · 3 min read
Laser Rangefinder Modules
Phase-Shift, LiDAR and Handheld Sensors with UART and USB
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Laser rangefinder modules measure distance by timing a laser beam. Phase-shift types such as the Meskernel LDJ give millimetre accuracy up to tens of metres, long-range pulsed units such as the LightWare GRF-500 reach hundreds of metres for drones, and 3D LiDARs like the Livox Mid-360 map an area. Check range, accuracy, interface (UART, USB, I2C), target reflectivity and the laser class.
Key specs at a glance
- Phase-shift
- Meskernel LDJ/LDK: tens of metres, mm accuracy, UART/USB-TTL
- Long range
- LightWare GRF-500 up to 500 m, UART/USB/I2C
- 3D LiDAR
- Livox Mid-360 scanning, Ethernet
- Handheld
- FNIRSI IR40 with Bluetooth app
- Interface
- UART TTL, USB, I2C, Ethernet
- Safety
- Class 1 or 2 visible lasers; never look into the beam
Types compared
Match the module to range and accuracy.
| Type | Range and accuracy | Use |
|---|---|---|
| Phase-shift module (LDJ, LDK) | Up to tens of metres, about 1 to 3 mm | Machine positioning, level and height sensing |
| Pulsed long-range (GRF-500) | Hundreds of metres, cm accuracy | Drone altimeter, terrain, surveying |
| 3D LiDAR (Livox Mid-360) | Scans a wide field of view | Mapping, SLAM, robot navigation |
| Handheld rangefinder | 40 m class, app sync | Measuring rooms and sites |
| Short-range IR / ToF chips | Centimetres to a few metres | See VL53L0X |
- Phase-shift module (LDJ, LDK)
- Range and accuracy:
- Up to tens of metres, about 1 to 3 mm
- Use:
- Machine positioning, level and height sensing
- Pulsed long-range (GRF-500)
- Range and accuracy:
- Hundreds of metres, cm accuracy
- Use:
- Drone altimeter, terrain, surveying
- 3D LiDAR (Livox Mid-360)
- Range and accuracy:
- Scans a wide field of view
- Use:
- Mapping, SLAM, robot navigation
- Handheld rangefinder
- Range and accuracy:
- 40 m class, app sync
- Use:
- Measuring rooms and sites
- Short-range IR / ToF chips
- Range and accuracy:
- Centimetres to a few metres
- Use:
- See VL53L0X
Wiring and reading
Most modules use UART: connect TX to your RX, power and ground, then send the measure command (or read continuously) and parse the frame in the datasheet. USB-to-TTL models plug straight into a PC. Use the right supply voltage, since some modules need 5 V to 12 V and draw hundreds of milliamps when measuring. See UART and USB to TTL.
What affects accuracy
dark, shiny or angled surfaces return less light; use a reflective plate for long range.
strong ambient light reduces range outdoors.
warm-up and temperature shift readings slightly.
the spot grows with distance, so aim at a flat area larger than the spot.
mount rigidly for stable results.
Laser safety
Visible Class 1 or 2 modules are safe for brief accidental exposure, but you must never stare into the beam or point it at other people's eyes. Class 3R and above can injure. Check the label, avoid mirror-like reflections and follow local rules, especially on drones.
When another sensor is better
For cheap short-range sensing, use ultrasonic or ToF; see lidar distance sensors, industrial ultrasonic sensors and radar modules. For presence only, a photoelectric sensor is enough.
Try it: Ultrasonic distance calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Pointing the laser at a mirror-like surface.
- Powering a long-range module from a weak supply.
- Using a visible-laser module outdoors in strong sun and expecting full range.
- Ignoring the beam spot size.
- Confusing UART voltage levels with 5 V boards.
Frequently asked questions
What accuracy can I expect?
Phase-shift modules reach a few millimetres; pulsed long-range units about centimetres.
Can a laser rangefinder work outdoors?
Yes, but range drops in bright sun.
Is the laser dangerous?
Class 1 and 2 are low risk, but never look into the beam.
UART or USB?
UART for microcontrollers, USB for PCs.
Which sensor for a drone altimeter?
A long-range sensor such as the GRF-500 class.
Parts for this guide
Calculators
Terms in this guide
Projects that use it
Put this into practice: 2 step-by-step builds in our project library use parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





