Component guide · Advanced · 4 min read
NVIDIA Jetson Modules and Carriers

Jetson Nano 4GB, Xavier NX 16GB, Orin Nano 8GB and Orin NX 8GB Modules, Waveshare Jetson Nano Kit, Seeed A603, A608 and J401, Forecr DSBOARD-AGX, VECROS JETCORE and WeAct Carrier Boards, Waveshare Heat Sink, PoE, UPS, Audio and Sensor Add-ons, ZED Link and Orbbec Persee N1
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A Jetson is a small computer module with an NVIDIA GPU for running AI vision and robotics at the edge. The module holds the processor and memory; a carrier board adds the ports. Orin Nano and Orin NX share one connector and carriers, so you can upgrade later. Jetson Nano and Xavier NX are older but still supported on JetPack 4 and 5. AGX Orin is the top tier for multi-camera robots.
Key specs at a glance
- Orin Nano 8GB
- Up to 67 TOPS (Super mode), 6-core Arm
- Orin NX 8/16GB
- Up to 117 or 157 TOPS
- Xavier NX 16GB
- 21 TOPS, JetPack 5
- Jetson Nano 4GB
- 472 GFLOPS, JetPack 4.6
- Carriers
- Seeed A603, A608, J401; Forecr for AGX Orin; WeAct compact
- Software
- JetPack (Ubuntu, CUDA, TensorRT, DeepStream)
A shorted, over-charged or damaged lithium cell can get very hot and catch fire. Use a protection board or BMS, never short the terminals, charge on a non-flammable surface and do not leave a charging pack alone. Throw away cells that are swollen or dented.
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1NVIDIA Jetson Nano 4GB Module₹20,750
Option 2NVIDIA Jetson Orin NX Module₹82,530
Option 3NVIDIA Jetson Orin Nano 8GB Module₹37,275
Option 4NVIDIA Jetson Xavier NX 16GB Module₹91,539
Option 5Waveshare Jetson Nano Development Kit (4GB, 16GB eMMC)₹46,999
Option 6Forecr DSBOARD-AGX Carrier Board for Jetson AGX Orin₹64,000
What the NVIDIA Jetson modules, carrier boards and add-ons: Nano, Xavier NX, Orin Nano, Orin NX and AGX Orin is
NVIDIA Jetson modules and carrier boards, such as the Jetson Orin Nano and Orin NX, are small AI computers with GPUs for running vision models, robotics and edge AI.
Pick the module first by AI performance and budget, then a carrier with the cameras, M.2 slots and power input you need. Production modules have no SD card; you flash an NVMe SSD or eMMC from an Ubuntu PC with NVIDIA SDK Manager or the carrier maker's flashing script, with the board in recovery mode.
Run models with TensorRT for the best speed; YOLO and other PyTorch models export to ONNX and then a TensorRT engine. Fit a heatsink with a fan, as Orin modules throttle without cooling. Use a supply that meets the carrier's rating, usually 9-20V.
NVIDIA Jetson modules, carrier boards and add-ons: Nano, Xavier NX, Orin Nano, Orin NX and AGX Orin pinout
The pins on the NVIDIA Jetson modules, carrier boards and add-ons: Nano, Xavier NX, Orin Nano, Orin NX and AGX Orin and what each one does.
| Pin | Function |
|---|---|
| 260-pin SO-DIMM | Module connector (Nano, NX, Orin Nano/NX) |
| MIPI CSI | Camera inputs on carrier |
| M.2 M-key | NVMe SSD |
| M.2 E-key | Wi-Fi card |
| 40-pin header | GPIO, I2C, SPI, UART |
- 260-pin SO-DIMM
- Module connector (Nano, NX, Orin Nano/NX)
- MIPI CSI
- Camera inputs on carrier
- M.2 M-key
- NVMe SSD
- M.2 E-key
- Wi-Fi card
- 40-pin header
- GPIO, I2C, SPI, UART
Wiring the NVIDIA Jetson modules, carrier boards and add-ons: Nano, Xavier NX, Orin Nano, Orin NX and AGX Orin
Insert the module at an angle and press down until the clips lock; power must be off.
| NVIDIA Jetson modules, carrier boards and add-ons: Nano, Xavier NX, Orin Nano, Orin NX and AGX Orin pin | Connection | Note |
|---|---|---|
| Recovery jumper | FC REC to GND | For flashing |
| USB-C / micro-USB | Ubuntu host PC | SDK Manager |
| DC input | 9-20V supply | Check carrier rating |
- Recovery jumper
- Connection:
- FC REC to GND
- Note:
- For flashing
- USB-C / micro-USB
- Connection:
- Ubuntu host PC
- Note:
- SDK Manager
- DC input
- Connection:
- 9-20V supply
- Note:
- Check carrier rating
Example code
On Orin Nano, JetPack 6.2 or later unlocks the higher Super mode power profile.
# JetPack and L4T version
cat /etc/nv_tegra_release
sudo apt install -y python3-pip && sudo pip3 install jetson-stats
jtop # live CPU, GPU, power and temperature
# Max performance mode (mode numbers differ by module)
sudo nvpmodel -q
sudo nvpmodel -m 0
sudo jetson_clocks
# Test a CSI camera
gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM),width=1280,height=720' ! nvvidconv ! xvimagesinkSetup and tuning
use the SD card image (dev kits) or NVIDIA SDK Manager from an Ubuntu PC for module and carrier setups.
install JetPack, which includes CUDA, cuDNN and TensorRT.
use the stated supply (often 9 to 20 V) and the right power mode with nvpmodel.
fit the fan or heatsink; Jetsons throttle when hot.
boot from NVMe SSD for speed.
use CSI cameras supported by the carrier, or USB cameras.
What you need
Shop this list19 of 19 found in our store · ₹5,73,315
NVIDIA Jetson Nano 4GB Module: the part this guide coversNVIDIA Jetson Nano 4GB Module₹20,750
NVIDIA Jetson Orin NX Module: another version this guide coversNVIDIA Jetson Orin NX Module₹82,530
NVIDIA Jetson Orin Nano 8GB Module: another version this guide coversNVIDIA Jetson Orin Nano 8GB Module₹37,275
NVIDIA Jetson Xavier NX 16GB Module: another version this guide coversNVIDIA Jetson Xavier NX 16GB Module₹91,539
Waveshare Jetson Nano Development Kit (4GB, 16GB eMMC): another version this guide coversWaveshare Jetson Nano Development Kit (4GB, 16GB eMMC)₹46,999
Forecr DSBOARD-AGX Carrier Board for Jetson AGX Orin: another version this guide coversForecr DSBOARD-AGX Carrier Board for Jetson AGX Orin₹64,000
Seeed A608 Carrier Board for Jetson Orin NX and Orin Nano: another version this guide coversSeeed A608 Carrier Board for Jetson Orin NX and Orin Nano₹28,750
Seeed Carrier Board for NVIDIA Jetson: another version this guide coversSeeed Carrier Board for NVIDIA Jetson₹28,500
Seeed reComputer J401 Carrier Board for Jetson Orin Nano / Orin NX: another version this guide coversSeeed reComputer J401 Carrier Board for Jetson Orin Nano / Orin NX₹13,034
VECROS JETCORE Carrier Board for NVIDIA Jetson: another version this guide coversVECROS JETCORE Carrier Board for NVIDIA Jetson₹40,000
WeAct Compact Carrier Board for Jetson Nano / Xavier NX / TX2 NX: another version this guide coversWeAct Compact Carrier Board for Jetson Nano / Xavier NX / TX2 NX₹15,422
Heat Sink for NVIDIA Jetson Nano: another version this guide coversHeat Sink for NVIDIA Jetson Nano₹704
Waveshare Environment Sensors Module for Jetson Nano: another version this guide coversWaveshare Environment Sensors Module for Jetson Nano₹6,116
Waveshare PoE Expansion Module for NVIDIA Jetson Orin: another version this guide coversWaveshare PoE Expansion Module for NVIDIA Jetson Orin₹1,542
Waveshare UPS Module for NVIDIA Jetson: another version this guide coversWaveshare UPS Module for NVIDIA Jetson₹3,150
Waveshare USB Audio Codec for Jetson Nano: another version this guide coversWaveshare USB Audio Codec for Jetson Nano₹2,100
Stereolabs ZED Link Mono Capture Card for NVIDIA AI: another version this guide coversStereolabs ZED Link Mono Capture Card for NVIDIA AI₹21,419
Orbbec Persee N1 3D Camera Computer (Jetson Nano): another version this guide coversOrbbec Persee N1 3D Camera Computer (Jetson Nano)₹69,400
USB to TTL serial converter: to talk to the module from a PCUSB to TTL Serial Converter (CH340G / CP2102 / FT232RL / PL2303)₹85Closest match, check the specs
Alternatives and when to choose them
- Edge AI boards: Jetson against other AI boards.
- Seeed reComputer: ready-built Jetson boxes.
- Raspberry Pi AI HAT: cheaper AI on a Pi.
Common mistakes to avoid
- Running without a fan.
- Using a weak power supply.
- Using a carrier without its BSP.
- Booting from slow SD cards for heavy work.
Frequently asked questions
Which Jetson should I start with?
The Jetson Orin Nano developer kit is the usual starting point for AI projects.
How do I install the operating system?
Flash the JetPack image to SD or NVMe, or use SDK Manager.
Why is my Jetson slow?
It is in a low power mode or throttling from heat.
Can I run YOLO on a Jetson?
Yes, YOLO runs well on Jetson, and TensorRT makes it much faster.
Are third-party carrier boards compatible?
Yes, but they may need the carrier maker's BSP.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
