Component guide · Intermediate · 3 min read
Edge AI Computers

Seeed reComputer J3011, J4011, J4012, Industrial J4011 and Mini J5012 (Jetson Orin), reComputer AI R2140 (Hailo-8), reComputer RK3576 AI Box, reCamera 2002w and NVIDIA DGX Spark
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are complete, ready-to-run AI computers. reComputer J30 and J40 hold a Jetson Orin Nano or Orin NX with an SSD and JetPack preinstalled; the Industrial version is fanless with wide-voltage input and isolated I/O. Mini J5012 packs AGX Orin with GMSL camera inputs. R2140 uses a Hailo-8 on a Raspberry Pi CM5 platform. reCamera is a smart AI camera, and DGX Spark is a desktop AI supercomputer for large models.
Key specs at a glance
- J3011
- Orin Nano 8GB, up to 67 TOPS
- J4011 / J4012
- Orin NX 8GB or 16GB, up to 157 TOPS
- Mini J5012
- AGX Orin 64GB with GMSL cameras
- R2140
- Hailo-8 26 TOPS, 16GB RAM
- RK3576 AI Box
- 6 TOPS NPU, Linux
- DGX Spark
- Grace Blackwell, 128GB unified memory, 4TB
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Seeed reComputer Industrial Fanless Edge AI Computer₹1,28,999
Option 2Seeed reComputer J30 Edge AI Computer (Jetson Orin Nano)₹96,772
Option 3Seeed reComputer J4011 Edge AI Computer, Jetson Orin NX 8GB₹1,31,599
Option 4Seeed reComputer J4012 Edge AI Computer, Jetson Orin NX 16GB₹1,91,537
Option 5Seeed reComputer Mini J5012 Edge AI Computer (AGX Orin 64GB, GMSL)₹6,47,048
Option 6Seeed reComputer AI R2140 Edge AI Computer (Hailo-8, 16GB)₹72,393
What the Seeed reComputer and reCamera edge AI computers and NVIDIA DGX Spark is
Seeed reComputer edge AI computers are fanless or fan-cooled boxes with NVIDIA Jetson or Raspberry Pi CM modules, built for deploying AI vision and robotics.
Choose a box when you want to deploy rather than build: everything is assembled, cooled and preloaded. J40 series suits multiple camera streams with DeepStream; the Industrial unit is for factory cabinets on 9-36V; R2140 is good for vision models already compiled for Hailo.
DGX Spark is for developing and fine-tuning large language and vision models on your desk, not for embedding in a robot. reCamera runs YOLO models on its own and outputs results over Wi-Fi with a Node-RED style interface.
Seeed reComputer and reCamera edge AI computers and NVIDIA DGX Spark pinout
The pins on the Seeed reComputer and reCamera edge AI computers and NVIDIA DGX Spark and what each one does.
| Pin | Function |
|---|---|
| USB 3 | Cameras and storage |
| Gigabit Ethernet | Network, PoE cameras via switch |
| HDMI / DP | Display |
| M.2 | Extra SSD or wireless |
| DC in | 12-19V or 9-36V (Industrial) |
- USB 3
- Cameras and storage
- Gigabit Ethernet
- Network, PoE cameras via switch
- HDMI / DP
- Display
- M.2
- Extra SSD or wireless
- DC in
- 12-19V or 9-36V (Industrial)
Wiring the Seeed reComputer and reCamera edge AI computers and NVIDIA DGX Spark
Leave space around fan vents; fanless units need airflow across their fins.
| Seeed reComputer and reCamera edge AI computers and NVIDIA DGX Spark pin | Connection | Note |
|---|---|---|
| DC power | Supplied adapter | Industrial: 9-36V terminal |
| Ethernet | Network switch | Camera streams |
| HDMI | Monitor | First setup |
- DC power
- Connection:
- Supplied adapter
- Note:
- Industrial: 9-36V terminal
- Ethernet
- Connection:
- Network switch
- Note:
- Camera streams
- HDMI
- Connection:
- Monitor
- Note:
- First setup
Example code
Export to TensorRT (yolo export format=engine) for several times the frame rate.
# Update and install jtop for monitoring
sudo apt update && sudo apt -y upgrade
sudo pip3 install jetson-stats && sudo reboot
# After reboot: check GPU and power
jtop
# Try a sample YOLO model with Ultralytics (GPU build)
pip3 install ultralytics
yolo predict model=yolov8n.pt source=0 show=TrueSetup and tuning
choose Jetson Orin Nano or Orin NX for AI, or Raspberry Pi based units for lighter work.
flash JetPack using Seeed's wiki steps if not preinstalled.
use the NVMe SSD for OS and data.
use the supplied 12 to 19 V adapter.
keep vents clear; fanless units need airflow around them.
What you need
Shop this list9 of 9 found in our store · ₹19,92,781
Seeed reComputer Industrial Fanless Edge AI Computer: the part this guide coversSeeed reComputer Industrial Fanless Edge AI Computer₹1,28,999
Seeed reComputer J30 Edge AI Computer (Jetson Orin Nano): another version this guide coversSeeed reComputer J30 Edge AI Computer (Jetson Orin Nano)₹96,772
Seeed reComputer J4011 Edge AI Computer, Jetson Orin NX 8GB: another version this guide coversSeeed reComputer J4011 Edge AI Computer, Jetson Orin NX 8GB₹1,31,599
Seeed reComputer J4012 Edge AI Computer, Jetson Orin NX 16GB: another version this guide coversSeeed reComputer J4012 Edge AI Computer, Jetson Orin NX 16GB₹1,91,537
Seeed reComputer Mini J5012 Edge AI Computer (AGX Orin 64GB, GMSL): another version this guide coversSeeed reComputer Mini J5012 Edge AI Computer (AGX Orin 64GB, GMSL)₹6,47,048
Seeed reComputer AI R2140 Edge AI Computer (Hailo-8, 16GB): another version this guide coversSeeed reComputer AI R2140 Edge AI Computer (Hailo-8, 16GB)₹72,393
Seeed reComputer RK3576 AI Box: another version this guide coversSeeed reComputer RK3576 AI Box₹24,950
Seeed reCamera 2002w AI Vision Camera, 64GB: another version this guide coversSeeed reCamera 2002w AI Vision Camera, 64GB₹12,934
NVIDIA DGX Spark AI Supercomputer (4TB Founders Edition): another version this guide coversNVIDIA DGX Spark AI Supercomputer (4TB Founders Edition)₹6,86,549
Alternatives and when to choose them
- Jetson modules and carriers: build your own.
- Edge AI boards: the wider picture.
- Raspberry Pi AI HAT: Hailo on a Pi.
Common mistakes to avoid
- Blocking vents.
- Using a weak power adapter.
- Low power mode by mistake.
- Flashing the wrong BSP.
Frequently asked questions
Which reComputer should I choose for YOLO?
Jetson Orin Nano or Orin NX models run YOLO well.
Can I reflash the reComputer?
Yes. Follow Seeed's wiki steps to flash JetPack from an Ubuntu PC.
Why is performance low?
Power mode is low or the unit is throttling.
Does it support ROS 2?
Yes. ROS 2 runs on JetPack, and Seeed has guides for it.
Can I add cameras?
Yes, through USB, CSI or GMSL ports, depending on the model.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
