Component guide · Beginner · 3 min read
Digital pH Pen and TDS/EC Meter

Calibration, Use and Care
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Pen-style pH and TDS/EC meters are pocket testers for drinking water, aquariums, hydroponics and science labs. A pH pen reads acidity after a two-point calibration with buffer powders; a TDS/EC pen reads dissolved salts as ppm or microsiemens and usually needs no user calibration. ATC (automatic temperature compensation) corrects readings for water temperature.
Key specs at a glance
- pH pens
- 0.00 to 14.00 pH, 0.01 or 0.1 resolution, ATC on most
- TDS/EC pens
- 0 to 9990 ppm, EC in uS/cm, temperature display
- 3-in-1
- pH, TDS and temperature in one meter
- Calibration
- pH: buffer powders 4.00, 6.86 and 9.18; TDS: factory or 342 ppm solution
- Power
- Button cells (LR44) or AAA
- Use
- Dip to the line, wait for a stable reading
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1PH02 Digital LCD pH Meter Pen Tester 0.00-14.00 Range – Blue₹289
Option 2PH02 Digital LCD pH Meter Pen Tester 0.00-14.00 Range – with Calibration Powders & Case₹289
Option 3Digital pH Meter Tester with ATC 0.0-14.0pH – 0.1 Resolution₹349
Option 4Yellow Digital pH Meter Tester with ATC 0.0-14.0pH – Pen Type₹339
Option 5PH-05 Portable Water Quality Tester pH Detector – Temperature Display & ATC₹402
Option 6EC-1 Digital LCD TDS & EC Meter Conductivity Tester – Blue₹239
What the Digital pH and TDS pen meter is
TDS meters estimate dissolved solids from conductivity using a conversion factor (often 0.5), so TDS ppm is roughly half the EC in uS/cm. Different meters use different factors, which is why two meters can disagree.
For India's drinking water, BIS IS 10500 gives 500 mg/L TDS as the acceptable limit. RO water typically reads 20 to 100 ppm.
Digital pH and TDS pen meter pinout
The pins on the Digital pH and TDS pen meter and what each one does.
| Pin | Function |
|---|---|
| Electrode | Glass pH bulb or titanium TDS pins |
| CAL / HOLD | Calibration and freeze buttons |
| Cap | Keep moist (pH) or dry (TDS) |
| Battery | Button cells in the top |
- Electrode
- Glass pH bulb or titanium TDS pins
- CAL / HOLD
- Calibration and freeze buttons
- Cap
- Keep moist (pH) or dry (TDS)
- Battery
- Button cells in the top
Wiring the Digital pH and TDS pen meter
These meters need no wiring. Use them to check the readings from an Arduino pH or TDS sensor.
| Digital pH and TDS pen meter pin | Step | Notes |
|---|---|---|
| pH 6.86 buffer | First calibration point | - |
| pH 4.00 buffer | Second point | - |
| Sample | Dip to the line, stir, wait | - |
- pH 6.86 buffer
- Step:
- First calibration point
- Notes:
- -
- pH 4.00 buffer
- Step:
- Second point
- Notes:
- -
- Sample
- Step:
- Dip to the line, stir, wait
- Notes:
- -
Example code
Button names differ by model; follow the leaflet. Recalibrate every few weeks of use.
1. Dissolve each buffer powder in 250 mL of distilled water.
2. Rinse the pen in distilled water and dab dry.
3. Dip in 6.86 buffer, hold CAL until it locks to 6.86.
4. Rinse, dip in 4.00 buffer, press CAL to lock 4.00.
5. Rinse and store with a few drops of storage solution in the cap.Setup and tuning
never store dry or in distilled water.
rinse and dry after use.
test at room temperature and stir gently.
compare an Arduino sensor against a pen in the same sample.
What you need
Shop this list13 of 13 found in our store · ₹9,807
PH02 Digital LCD pH Meter Pen Tester 0.00-14.00 Range – Blue: the part this guide coversPH02 Digital LCD pH Meter Pen Tester 0.00-14.00 Range – Blue₹289
PH02 Digital LCD pH Meter Pen Tester 0.00-14.00 Range – with Calibration Powders & Case: another version this guide coversPH02 Digital LCD pH Meter Pen Tester 0.00-14.00 Range – with Calibration Powders & Case₹289
Generic Digital pH Meter Tester with ATC 0.0-14.0pH – 0.1 Resolution: another version this guide coversDigital pH Meter Tester with ATC 0.0-14.0pH – 0.1 Resolution₹349
Generic Yellow Digital pH Meter Tester with ATC 0.0-14.0pH – Pen Type: another version this guide coversYellow Digital pH Meter Tester with ATC 0.0-14.0pH – Pen Type₹339
Generic PH-05 Portable Water Quality Tester pH Detector – Temperature Display & ATC: another version this guide coversPH-05 Portable Water Quality Tester pH Detector – Temperature Display & ATC₹402
Generic EC-1 Digital LCD TDS & EC Meter Conductivity Tester – Blue: another version this guide coversEC-1 Digital LCD TDS & EC Meter Conductivity Tester – Blue₹239
Generic White TDS & EC Digital LCD Meter Conductivity Tester without Battery: another version this guide coversWhite TDS & EC Digital LCD Meter Conductivity Tester without Battery₹207
TDS-M2 TDS Meter Water Quality Tester 0-9990PPM: another version this guide coversTDS-M2 TDS Meter Water Quality Tester 0-9990PPM₹209
XH-M203 TDS & EC Digital LCD Meter Conductivity Tester (without Battery) – DC 12V Input: another version this guide coversXH-M203 TDS & EC Digital LCD Meter Conductivity Tester (without Battery) – DC 12V Input₹198
Generic 3-in-1 pH, TDS & Temperature Meter – LCD Display, 4.5V DC: another version this guide covers3-in-1 pH, TDS & Temperature Meter – LCD Display, 4.5V DC₹2,349
DFRobot Gravity analog pH sensor: to log pH continuouslyDFRobot Gravity Analog pH Sensor for Arduino₹3,133Closest match, check the specs
DFRobot Gravity analog TDS sensor: to log TDS continuouslyDFRobot Gravity Analog TDS Sensor Meter for Arduino₹1,464Closest match, check the specs
DS18B20 waterproof temperature probe: temperature for compensationSonoff DS18B20 Waterproof Temperature Sensor Probe w/ 1m Cable – 1-Wire Interface₹340
Alternatives and when to choose them
- Analog pH sensor: continuous pH with Arduino.
- Analog TDS sensor: continuous TDS with Arduino.
- Water quality sensors: the full set.
Common mistakes to avoid
- Storing a pH pen dry.
- Calibrating with mixed-up buffers.
- Expecting two TDS meters with different factors to agree.
- Reading before the display stabilises.
Frequently asked questions
What TDS is safe to drink?
Up to 500 ppm is acceptable under IS 10500; lower is not always better for taste.
How often should I calibrate a pH pen?
Every two to four weeks of use.
Can a TDS meter detect bacteria?
No, only dissolved salts.
What does ATC mean?
Automatic temperature compensation.
Why is my RO water reading low?
RO removes most dissolved solids; 20 to 100 ppm is normal.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.



