Component guide · Beginner · 5 min read
PIR Motion Sensor Light Switches

Ceiling, Wall, E27 Lamp Holder, 12-24 V and Smart PIR Alarms
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
PIR motion light switches turn a light on when a person moves nearby and off after a set delay. Ceiling models see 360 degrees, wall models about 180 degrees, and E27 lamp-holder versions screw in between bulb and socket. The 12 to 24 V versions switch LED strips under cabinets and stairs. Most have knobs for delay time and a light sensor so they only work in the dark.
Key specs at a glance
- Supply
- 100 to 240 V AC, or 5 to 24 V DC (strip versions)
- Detection
- 360 degrees (ceiling), 100 to 180 degrees (wall)
- Range
- About 4 to 12 m
- Delay
- About 10 s to several minutes, adjustable
- Light level
- LUX knob, from daylight to dark only
- Load
- Check each model: around 200 W to 1200 W AC, 3 to 5 A DC
This part is often wired to 230 V mains. Do all wiring with the plug pulled out, keep mains wires inside a closed box with strain relief, add a fuse, and never touch the board while it is plugged in. If you are new to mains wiring, have an electrician check it before you switch on.
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1PQ05 Human Infrared Sensor AC220-240V – 360° Ceiling Mount Motion Detector₹349
Option 2AC110-240V 360 Degree PIR Infrared Motion Sensor Switch₹569
Option 3DC 12V/24V Ceiling PIR Motion Sensor Switch Module – 3A Load, 120° Range₹201
Option 4DC5-24V PIR Motion Sensor 5A – Infrared Motion Detector Controller₹559
Option 5E27 Lamp Base PIR Motion Detector – AC 170-250V Automatic Wall Light Holder₹689
Option 6ES-P06 IP44 PIR Motion Sensor Switch (Wall Mounted Outdoor)₹566
What the PIR motion sensor light switches is
PIR motion sensor light switches are ready-made mains or low-voltage switches that turn lights on when a warm body moves and off after a set time, used in corridors and stairs.
PIR sensors see changes in body heat, so they detect walking across the field best and someone walking straight towards them least.
LED lamps draw a small inrush current; stay well under the rated load and prefer models rated for LED. The smart Tuya and Sonoff PIRs do not switch power themselves; they trigger automations.
PIR motion sensor light switches pinout
The pins on the PIR motion sensor light switches and what each one does.
| Pin | Function |
|---|---|
| L | Live in |
| N | Neutral |
| L-out (often red or blue) | To the lamp |
| DC +, - | Strip versions: supply in and LED out |
- L
- Live in
- N
- Neutral
- L-out (often red or blue)
- To the lamp
- DC +, -
- Strip versions: supply in and LED out
Wiring the PIR motion sensor light switches
Mains wiring must be done with the supply off, in a proper box. If unsure, use a qualified electrician.
| PIR motion sensor light switches pin | 230 V ceiling or wall unit | 12-24 V DC strip unit |
|---|---|---|
| L (live) | Mains live | 12 / 24 V supply + |
| N | Mains neutral | Supply - |
| Load / out | Lamp live | LED strip + |
| Lamp return | Neutral | Strip - to supply - |
- L (live)
- 230 V ceiling or wall unit:
- Mains live
- 12-24 V DC strip unit:
- 12 / 24 V supply +
- N
- 230 V ceiling or wall unit:
- Mains neutral
- 12-24 V DC strip unit:
- Supply -
- Load / out
- 230 V ceiling or wall unit:
- Lamp live
- 12-24 V DC strip unit:
- LED strip +
- Lamp return
- 230 V ceiling or wall unit:
- Neutral
- 12-24 V DC strip unit:
- Strip - to supply -
Example code
A minimal sketch to check the part works.
TIME: start at minimum (about 10 s) while testing, then raise it.
LUX: turn to the sun symbol to test in daylight; set back towards the moon
so it only works when it is dark.
SENS: (if present) lower it if trees, pets or heaters trigger it.
Walk across the field, not towards it, to test range.Setup and tuning
mains versions connect live, neutral and load; a qualified electrician must install them.
set time delay, sensitivity and light level with the dials.
mount at 2 to 3 m height facing the path people walk across.
check the LED wattage rating.
keep away from heaters, AC vents and direct sun.
What you need
Shop this list20 of 20 found in our store · ₹8,194
PQ05 Human Infrared Sensor AC220-240V – 360° Ceiling Mount Motion Detector: the part this guide coversPQ05 Human Infrared Sensor AC220-240V – 360° Ceiling Mount Motion Detector₹349
Generic AC110-240V 360 Degree PIR Infrared Motion Sensor Switch: another version this guide coversAC110-240V 360 Degree PIR Infrared Motion Sensor Switch₹569
Generic DC 12V/24V Ceiling PIR Motion Sensor Switch Module – 3A Load, 120° Range: another version this guide coversDC 12V/24V Ceiling PIR Motion Sensor Switch Module – 3A Load, 120° Range₹201
Generic DC5-24V PIR Motion Sensor 5A – Infrared Motion Detector Controller: another version this guide coversDC5-24V PIR Motion Sensor 5A – Infrared Motion Detector Controller₹559
Generic E27 Lamp Base PIR Motion Detector – AC 170-250V Automatic Wall Light Holder: another version this guide coversE27 Lamp Base PIR Motion Detector – AC 170-250V Automatic Wall Light Holder₹689
ES-P06 IP44 PIR Motion Sensor Switch (Wall Mounted Outdoor): another version this guide coversES-P06 IP44 PIR Motion Sensor Switch (Wall Mounted Outdoor)₹566
Human Infrared PIR Motion Switch (AC): another version this guide coversHuman Infrared PIR Motion Switch (AC)₹386
Generic Infrared PIR Motion Sensor Module – DC 12V / AC 85-265V, 180° Detection, Adjustable Delay: another version this guide coversInfrared PIR Motion Sensor Module – DC 12V / AC 85-265V, 180° Detection, Adjustable Delay₹279
P117A Human Infrared Sensor AC100-240V: another version this guide coversP117A Human Infrared Sensor AC100-240V₹287
P806W Human Infrared Sensor AC100-240V – 180° Detection, Wall Mount: another version this guide coversP806W Human Infrared Sensor AC100-240V – 180° Detection, Wall Mount₹379
PB01W Human Infrared Sensor AC100-240V – 180° Motion Detection, 12m Range: another version this guide coversPB01W Human Infrared Sensor AC100-240V – 180° Motion Detection, 12m Range₹539
PB03W Human Infrared Sensor AC100-240V – 180° PIR Motion Detector: another version this guide coversPB03W Human Infrared Sensor AC100-240V – 180° PIR Motion Detector₹399
PB05W Human Infrared Sensor AC220-240V – 180° Detection, Adjustable Delay: another version this guide coversPB05W Human Infrared Sensor AC220-240V – 180° Detection, Adjustable Delay₹429
Generic PIR Motion Sensor Switch – AC 110-240V, 4-6m Range, 40mm Fitting Diameter: another version this guide coversPIR Motion Sensor Switch – AC 110-240V, 4-6m Range, 40mm Fitting Diameter₹529
PIR8W Light Band Sensor DC12-24V – 120° Detection, Flame-Retardant ABS: another version this guide coversPIR8W Light Band Sensor DC12-24V – 120° Detection, Flame-Retardant ABS₹289
PIR9 Light Band Sensor DC5-24V – 120° Fresnel Lens, Screw Socket: another version this guide coversPIR9 Light Band Sensor DC5-24V – 120° Fresnel Lens, Screw Socket₹259
PM13 Human Infrared Sensor AC100-240V – 140° Detection Angle, Adjustable Delay & Light Control: another version this guide coversPM13 Human Infrared Sensor AC100-240V – 140° Detection Angle, Adjustable Delay & Light Control₹339
PQ06 Human Infrared Sensor AC100-240V – 360° Detection, 6m Range: another version this guide coversPQ06 Human Infrared Sensor AC100-240V – 360° Detection, 6m Range₹469
PQ07 Human Infrared Sensor AC100-240V – 360° PIR Motion Detector: another version this guide coversPQ07 Human Infrared Sensor AC100-240V – 360° PIR Motion Detector₹389
PT13 Human Infrared Sensor AC100-240V – 100° Detection Angle, 8m Range: another version this guide coversPT13 Human Infrared Sensor AC100-240V – 100° Detection Angle, 8m Range₹289
Alternatives and when to choose them
- HC-SR501 PIR module: build your own with a microcontroller.
- Mini PIR modules: small boards for projects.
- mmWave radar sensor: detects people who sit still.
Common mistakes to avoid
- Facing it directly at the door walking line.
- Mounting near heaters.
- Exceeding the LED rating.
- DIY mains wiring.
Frequently asked questions
Why does the light turn off while I sit still?
PIR sensors only see movement, so a still person is missed; increase the time delay.
Why does it trigger with no one there?
Warm air from AC vents or heaters, or moving sunlight, looks like a person to the sensor.
Can it switch LED lamps?
Yes, as long as the total LED load stays within the switch's LED rating.
Where should I mount it?
Facing across the walking path, at 2 to 3 m.
Can I install it myself?
Mains wiring should be done by a qualified electrician.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.












