Component guide · Beginner · 4 min read
Raspberry Pi 5 Plastic, Acrylic, DIN Rail and Official Cases

Black and Red-White Cases, ABS Striped Cases, 5-Layer and Multilayer Acrylic, Silicone Bumper
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These Pi 5 cases are plastic or acrylic, lighter and cheaper than metal. Official cases give a snug fit with a fan slot; ABS cases add fan and cooler options; layered acrylic cases are open and clear; DIN rail cases mount in control cabinets. Check the fan or active cooler support in the listing.
Key specs at a glance
- Fits
- Raspberry Pi 5
- Materials
- ABS plastic, acrylic, silicone
- Cooling
- Fan slot, 4010 or 3007 fan, active cooler support
- Styles
- Official, striped ABS, layered acrylic, DIN rail
- Extras
- 3.5 inch touch screen support on one ABS case
- Colours
- Black, red-white, blue, clear
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Raspberry Pi 5 Case, Official Red-White₹1,039
Option 2Official Raspberry Pi 5 Case – Black₹1,069
Option 3Aluminum Passive Cooling Armor Case for Raspberry Pi 5₹519
Option 4Black ABS Case for Raspberry Pi 5B w/ 3.5inch Touch Screen Support₹239
Option 5ABS Striped Case with 4010 PWM Fan & Heatsink for Pi 5₹439
Option 6Black ABS Striped Case for Raspberry Pi 5₹239
What the Raspberry Pi 5 ABS, acrylic, DIN rail and official cases is
Plastic cases protect the board and show off the Pi. The official case has a removable lid and room for the active cooler. Striped ABS cases add a fan or a 4010 PWM fan and heatsink. Layered acrylic cases are stacked plates held with standoffs, easy to take apart and see through. DIN rail cases clip into industrial panels.
Because plastic does not carry heat, fit the fan or active cooler options when you plan sustained load.
Raspberry Pi 5 ABS, acrylic, DIN rail and official cases pinout
The pins on the Raspberry Pi 5 ABS, acrylic, DIN rail and official cases and what each one does.
| Pin | Function |
|---|---|
| Case body | ABS, acrylic layers or silicone bumper |
| Fan slot | Space for a fan or the Pi 5 active cooler |
| Port cutouts | Match the Pi 5 layout |
| DIN clip | On DIN rail models |
- Case body
- ABS, acrylic layers or silicone bumper
- Fan slot
- Space for a fan or the Pi 5 active cooler
- Port cutouts
- Match the Pi 5 layout
- DIN clip
- On DIN rail models
Wiring the Raspberry Pi 5 ABS, acrylic, DIN rail and official cases
How the Raspberry Pi 5 ABS, acrylic, DIN rail and official cases fits and connects.
| Raspberry Pi 5 ABS, acrylic, DIN rail and official cases pin | Fits or connects to | Note |
|---|---|---|
| Pi 5 board | Standoffs or clips in the case | Match the board orientation to the cutouts |
| Fan header | Case fan lead | Use the 4-pin PWM header beside the board |
| GPIO header | HATs and wires | Check clearance with the lid on |
| Power | 27 W USB-C PD supply | Use a Pi 5 rated supply |
- Pi 5 board
- Fits or connects to:
- Standoffs or clips in the case
- Note:
- Match the board orientation to the cutouts
- Fan header
- Fits or connects to:
- Case fan lead
- Note:
- Use the 4-pin PWM header beside the board
- GPIO header
- Fits or connects to:
- HATs and wires
- Note:
- Check clearance with the lid on
- Power
- Fits or connects to:
- 27 W USB-C PD supply
- Note:
- Use a Pi 5 rated supply
Example code
A short order of work that suits this family.
1. Power off. Fit the heatsink or active cooler to the Pi before closing the case.
2. Place the Pi on the standoffs and tighten the screws gently; do not over-tighten acrylic.
3. Plug the fan lead into the fan header; keep wires clear of the blades.
4. Press the lid or stack the top plate; check the port cutouts line up.
5. Connect power and check the temperature after a few minutes of load.Setup and tuning
choose a model with a fan slot or active cooler for heavier work.
acrylic cracks if you overtighten; use hand pressure only.
check HAT height against the case before ordering.
DIN rail cases need a rail of the standard width.
What you need
Shop this list17 of 17 found in our store · ₹19,439
Raspberry Pi 5 Case, Official Red-White: the part this guide coversRaspberry Pi 5 Case, Official Red-White₹1,039
Official Raspberry Pi 5 Case – Black: another version this guide coversOfficial Raspberry Pi 5 Case – Black₹1,069
Aluminum Passive Cooling Armor Case for Raspberry Pi 5: another version this guide coversAluminum Passive Cooling Armor Case for Raspberry Pi 5₹519
Black ABS Case for Raspberry Pi 5B w/ 3.5inch Touch Screen Support: another version this guide coversBlack ABS Case for Raspberry Pi 5B w/ 3.5inch Touch Screen Support₹239
ABS Striped Case with 4010 PWM Fan & Heatsink for Pi 5: another version this guide coversABS Striped Case with 4010 PWM Fan & Heatsink for Pi 5₹439
Black ABS Striped Case for Raspberry Pi 5: another version this guide coversBlack ABS Striped Case for Raspberry Pi 5₹239
Acrylic Blue Multilayer Case for Raspberry Pi 5: another version this guide coversAcrylic Blue Multilayer Case for Raspberry Pi 5₹339
Black ABS Case with Logo for Raspberry Pi 5B: another version this guide coversBlack ABS Case with Logo for Raspberry Pi 5B₹299
Black Acrylic 5-Layer Case for Raspberry Pi 5 with Fan Support: another version this guide coversBlack Acrylic 5-Layer Case for Raspberry Pi 5 with Fan Support₹339
Waveshare Transparent Blue Acrylic Case for Raspberry Pi 5: another version this guide coversWaveshare Transparent Blue Acrylic Case for Raspberry Pi 5₹449
Argon ONE V3 Case for Raspberry Pi 5: another version this guide coversArgon ONE V3 Case for Raspberry Pi 5₹3,949
Argon ONE V5 Case for Raspberry Pi 5: another version this guide coversArgon ONE V5 Case for Raspberry Pi 5₹4,759
Waveshare DIN Rail ABS Case for Raspberry Pi 5: another version this guide coversWaveshare DIN Rail ABS Case for Raspberry Pi 5₹397
Argon NEO 5 Black Case for Raspberry Pi 5: another version this guide coversArgon NEO 5 Black Case for Raspberry Pi 5₹2,249
Argon NEO 5 BRED Case for Raspberry Pi 5: another version this guide coversArgon NEO 5 BRED Case for Raspberry Pi 5₹2,207
EDATEC Passive Cooling CNC Case for Raspberry Pi 5 – Black: another version this guide coversEDATEC Passive Cooling CNC Case for Raspberry Pi 5 – Black₹669
Official Raspberry Pi 5 Silicone Bumper Case: another version this guide coversOfficial Raspberry Pi 5 Silicone Bumper Case₹239
Alternatives and when to choose them
- Pi 5 metal and cooled cases: when heat is a priority.
- Raspberry Pi cases and cooling: general advice.
- Raspberry Pi 5: the board itself.
Common mistakes to avoid
- Ordering a Pi 4 case for a Pi 5.
- Overtightening acrylic standoffs.
- Not fitting a cooler in a closed plastic case.
- Forcing the lid over a tall HAT.
Frequently asked questions
Do plastic cases overheat the Pi 5?
They can; use a fan slot or the active cooler for sustained loads.
Which case is easiest to open?
Layered acrylic cases come apart with a few screws.
Can I mount a Pi 5 on a DIN rail?
Yes, with the DIN rail ABS case.
Does the official case fit the cooler?
Yes, the official Pi 5 case has room for the active cooler.
Are the cases compatible with HATs?
Check the HAT height against the case before ordering.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
