Component guide · Beginner · 4 min read
Raspberry Pi Coolers and Fans, ICE Tower, Argon THRML, ORICO NVMe Enclosure

DFRobot PiTray, Uctronics Cluster Case and Waveshare HMI Display
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
This group holds the extra parts around a Raspberry Pi: tower coolers and fans for the Pi 4 and Pi 5, an NVMe SSD USB enclosure, a PiTray for the Compute Module 4, a four-Pi cluster case and an all-in-one HMI display. Match the part to your Pi model and the job.
Key specs at a glance
- Coolers
- ICE Tower, low-profile fan, Argon THRML 30 mm
- Storage
- ORICO NVMe M.2 enclosure (USB 10 Gbps)
- Compute Module
- DFRobot PiTray mini for CM4
- Cluster
- Uctronics enclosure for 4 Pis and 4 SSDs
- Display
- Waveshare industrial HMI all-in-one for the Pi
- Fits
- Pi 4B, Pi 5 and Compute Module 4 by part
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Aluminum Case with Cooling Fan for Raspberry Pi 5₹779
Option 2Black ABS Striped Case with 3007 Cooler for Raspberry Pi 5₹649
Option 3Waveshare Clear Acrylic Case for Raspberry Pi 5, Active Cooler Support₹449
Option 4Waveshare Pi 4 Case with Dual Cooling Fans₹999
Option 5Waveshare Rainbow Acrylic Case for Raspberry Pi 5, Active Cooler Support₹609
Option 6Waveshare Pi 4 Rainbow Acrylic Case w/ Cooling Fan₹559
What the Raspberry Pi coolers, fans, SSD enclosures and CM4 accessories is
Fans and tower coolers keep a loaded Pi from throttling: the ICE Tower adds a heatsink and fan for the Pi 4, the low-profile fan is for tight cases, and the Argon THRML is an active cooler for the Pi 5. The ORICO enclosure turns an NVMe SSD into a fast USB drive for any Pi. The PiTray mini is a small carrier for the Compute Module 4, the Uctronics case builds a four-node Pi cluster with SSD slots, and the Waveshare HMI is a touch display with the Pi built in.
Check each listing for the Pi model it fits before ordering, since coolers and carriers are not interchangeable.
Raspberry Pi coolers, fans, SSD enclosures and CM4 accessories pinout
The pins on the Raspberry Pi coolers, fans, SSD enclosures and CM4 accessories and what each one does.
| Pin | Function |
|---|---|
| Heatsink / tower | Spreads CPU heat |
| Fan header or GPIO | Powers the fan |
| USB 3 / USB-C | NVMe enclosure link to the Pi |
| CM4 socket | On the PiTray |
- Heatsink / tower
- Spreads CPU heat
- Fan header or GPIO
- Powers the fan
- USB 3 / USB-C
- NVMe enclosure link to the Pi
- CM4 socket
- On the PiTray
Wiring the Raspberry Pi coolers, fans, SSD enclosures and CM4 accessories
How the Raspberry Pi coolers, fans, SSD enclosures and CM4 accessories fits and connects.
| Raspberry Pi coolers, fans, SSD enclosures and CM4 accessories pin | Fits or connects to | Note |
|---|---|---|
| Cooler or fan | Pi 4 or Pi 5 as listed | Use the thermal pad or paste supplied |
| Fan lead | Fan header or GPIO 5 V | Check polarity |
| NVMe enclosure | Pi USB 3 port | Powers from the USB port; use a good cable |
| CM4 | PiTray socket | Seat the module fully |
- Cooler or fan
- Fits or connects to:
- Pi 4 or Pi 5 as listed
- Note:
- Use the thermal pad or paste supplied
- Fan lead
- Fits or connects to:
- Fan header or GPIO 5 V
- Note:
- Check polarity
- NVMe enclosure
- Fits or connects to:
- Pi USB 3 port
- Note:
- Powers from the USB port; use a good cable
- CM4
- Fits or connects to:
- PiTray socket
- Note:
- Seat the module fully
Example code
A short order of work that suits this family.
1. Power off. Clean the CPU and fit the thermal pad or paste.
2. Mount the cooler with the supplied screws or clips.
3. Connect the fan to the fan header or 5 V and GND pins.
4. For the NVMe enclosure, insert the SSD, close it and connect to a USB 3 port.
5. Boot and check temperature and speed under load.Setup and tuning
Pi 4 coolers do not fit a Pi 5.
remove plastic film from the pad before fitting.
use a high-quality USB 3 cable and good supply for the NVMe enclosure.
keep each Pi's power supply sized for its SSD.
What you need
Shop this list18 of 18 found in our store · ₹43,239
Aluminum Case with Cooling Fan for Raspberry Pi 5: the part this guide coversAluminum Case with Cooling Fan for Raspberry Pi 5₹779
Black ABS Striped Case with 3007 Cooler for Raspberry Pi 5: another version this guide coversBlack ABS Striped Case with 3007 Cooler for Raspberry Pi 5₹649
Waveshare Clear Acrylic Case for Raspberry Pi 5, Active Cooler Support: another version this guide coversWaveshare Clear Acrylic Case for Raspberry Pi 5, Active Cooler Support₹449
Waveshare Pi 4 Case with Dual Cooling Fans: another version this guide coversWaveshare Pi 4 Case with Dual Cooling Fans₹999
Waveshare Rainbow Acrylic Case for Raspberry Pi 5, Active Cooler Support: another version this guide coversWaveshare Rainbow Acrylic Case for Raspberry Pi 5, Active Cooler Support₹609
Waveshare Pi 4 Rainbow Acrylic Case w/ Cooling Fan: another version this guide coversWaveshare Pi 4 Rainbow Acrylic Case w/ Cooling Fan₹559
KKSB Cases Raspberry Pi DIN Rail Clip Mounting Bracket: another version this guide coversKKSB Cases Raspberry Pi DIN Rail Clip Mounting Bracket₹969
KKSB Cases Raspberry Pi 5 Case – HATs, Cooler & NVMe Support: another version this guide coversKKSB Cases Raspberry Pi 5 Case – HATs, Cooler & NVMe Support₹3,549
Argon THRML 30mm Active Cooler for Raspberry Pi 5: another version this guide coversArgon THRML 30mm Active Cooler for Raspberry Pi 5₹834
Waveshare Pi 5 Transparent/Black Acrylic Case w/ Cooler Support: another version this guide coversWaveshare Pi 5 Transparent/Black Acrylic Case w/ Cooler Support₹549
Uctronics U6260 Cluster Enclosure for 4x Raspberry Pi & 4x SSD: another version this guide coversUctronics U6260 Cluster Enclosure for 4x Raspberry Pi & 4x SSD₹8,879
Raspberry Pi 4 Case Fan: another version this guide coversRaspberry Pi 4 Case Fan₹469
Waveshare Industrial HMI All-in-One Touch Display for Raspberry Pi: another version this guide coversWaveshare Industrial HMI All-in-One Touch Display for Raspberry Pi₹15,200
Waveshare Cooling Fan for Raspberry Pi 4B: another version this guide coversWaveshare Cooling Fan for Raspberry Pi 4B₹1,300
Aluminium Case with Cooling Fan for Raspberry Pi 4: another version this guide coversAluminium Case with Cooling Fan for Raspberry Pi 4₹600
Waveshare Low-Profile ICE Tower Cooler for Raspberry Pi 4B: another version this guide coversWaveshare Low-Profile ICE Tower Cooler for Raspberry Pi 4B₹2,450
ORICO NVMe M.2 SSD Enclosure (USB 10Gbps): another version this guide coversORICO NVMe M.2 SSD Enclosure (USB 10Gbps)₹2,288
DFRobot PiTray mini for Raspberry Pi Compute Module 4: another version this guide coversDFRobot PiTray mini for Raspberry Pi Compute Module 4₹2,108
Alternatives and when to choose them
- Heatsinks, fans and thermal parts: more cooling options.
- Raspberry Pi NVMe and PCIe: internal NVMe on the Pi 5.
- Raspberry Pi compute modules: CM4 and CM5.
Common mistakes to avoid
- Fitting a Pi 4 cooler on a Pi 5.
- Leaving the plastic film on the thermal pad.
- Using a weak USB cable for the NVMe enclosure.
- Underpowering a multi-Pi cluster.
Frequently asked questions
Do I need a fan on a Pi 5?
For heavy work yes; an active cooler keeps it from throttling.
Can I boot from the NVMe enclosure?
Yes on Pis that boot from USB storage.
What is the PiTray for?
It carries a Compute Module 4 with standard connectors.
How many Pis fit the cluster case?
Four, with four SSDs.
What is the Waveshare HMI?
A touch display with a Raspberry Pi built in.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
