Component guide · Beginner · 4 min read
Raspberry Pi Pico Guide

Pico vs Pico W vs Pico 2
By Geekobot Learning Team · Updated 24 Oct 2026
On this page
The Raspberry Pi Pico is a low-cost 3.3 V microcontroller board, not a computer: it runs one program and has no operating system. The original Pico uses the dual-core RP2040 chip at 133 MHz with 264 KB of RAM. The Pico W adds Wi-Fi and Bluetooth, and the Pico 2 upgrades to the faster RP2350 with 520 KB of RAM.
Key specs at a glance
- Chip
- RP2040 (Pico, Pico W) / RP2350 (Pico 2, Pico 2 W)
- CPU
- 2x Cortex-M0+ at 133 MHz / 2x Cortex-M33 or RISC-V at 150 MHz
- RAM / flash
- 264 KB / 2 MB (Pico); 520 KB / 4 MB (Pico 2)
- GPIO
- 26 usable, 3 of them 12-bit ADC inputs
- Interfaces
- 2x UART, 2x SPI, 2x I2C, 16 PWM channels, PIO
- Logic level
- 3.3 V, not 5 V tolerant
- Input power
- 1.8 to 5.5 V on VSYS, or 5 V USB
- Wireless
- Pico W / 2 W: 2.4 GHz Wi-Fi + Bluetooth
Pico vs Raspberry Pi: what's the difference?
A Raspberry Pi 4 or 5 is a full Linux computer with HDMI, USB ports and an SD card. A Pico is a microcontroller board like an Arduino Uno: it starts in milliseconds, uses very little power and is ideal for reading sensors and driving outputs with precise timing. Many projects use both: the Pi runs the dashboard and the Pico handles real-time I/O.
Which Pico should you buy?
| Board | Chip | Wireless | Choose it for |
|---|---|---|---|
| Pico / Pico H | RP2040 | None | Learning MicroPython, USB devices, cheap I/O. "H" has headers fitted. |
| Pico W / WH | RP2040 | Wi-Fi + Bluetooth | IoT sensors, web servers, Home Assistant nodes |
| Pico 2 | RP2350 | None | More speed and memory, security features |
| Pico 2 W | RP2350 | Wi-Fi + Bluetooth | New wireless projects |
- Pico / Pico H
- Chip:
- RP2040
- Wireless:
- None
- Choose it for:
- Learning MicroPython, USB devices, cheap I/O. "H" has headers fitted.
- Pico W / WH
- Chip:
- RP2040
- Wireless:
- Wi-Fi + Bluetooth
- Choose it for:
- IoT sensors, web servers, Home Assistant nodes
- Pico 2
- Chip:
- RP2350
- Wireless:
- None
- Choose it for:
- More speed and memory, security features
- Pico 2 W
- Chip:
- RP2350
- Wireless:
- Wi-Fi + Bluetooth
- Choose it for:
- New wireless projects
Pico pinout essentials
5 V from USB when plugged in.
main power input, 1.8 to 5.5 V. Feed batteries or a regulator here.
regulated 3.3 V for sensors; keep the load under about 300 mA.
pull low to switch the board off.
ADC0 to ADC2 analog inputs (0 to 3.3 V).
drives the onboard LED on the Pico. On the Pico W the LED is wired to the wireless chip, so use the name "LED" in code.
GP4 (SDA), GP5 (SCL). Nearly every function can be moved to other pins.
Program the Pico with MicroPython in five minutes
- 1Hold the BOOTSEL button and plug the Pico into USB. It appears as a drive called RPI-RP2 (RP2350 on the Pico 2).
- 2Install Thonny, choose Tools > Options > Interpreter > MicroPython (Raspberry Pi Pico) and let it install the firmware.
- 3Type the code below and click Run. Save it as main.py on the Pico to run it at every power-up.
from machine import Pin
import time
led = Pin("LED", Pin.OUT) # works on Pico, Pico W and Pico 2
while True:
led.toggle()
time.sleep(0.5)What is PIO and why it matters
Programmable I/O (PIO) blocks are small state machines that run their own tiny programs independently of the CPU. They let the Pico generate exact signals such as WS2812B LED data, VGA video or extra serial ports without slowing down your main code. Ready-made PIO examples ship with MicroPython and the C SDK, so you can use them without writing PIO assembly.
Pico vs ESP32 vs Arduino Uno
Pick the Pico for MicroPython learning, USB keyboard and MIDI projects and precise timing. Pick the ESP32 when Wi-Fi is central and you want the largest library ecosystem. Pick the Uno when you need 5 V I/O or shields.
Try it: ADC resolution calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Treating the Pico as a mini Raspberry Pi: it cannot run Linux, Python packages from pip or a desktop.
- Connecting 5 V signals to GPIO pins; the RP2040 and RP2350 are 3.3 V devices.
- Using Pin(25) for the LED on a Pico W, where the LED is on the wireless chip. Use Pin("LED").
- Powering both VSYS from a battery and USB at the same time without a Schottky diode, which back-feeds the battery.
- Using a charge-only micro USB cable; the Pico will power up but never appear on the computer.
Frequently asked questions
Is the Raspberry Pi Pico good for beginners?
Yes. It is inexpensive, MicroPython lets you write and run code instantly from Thonny, and the official Get Started guides are free.
Can the Raspberry Pi Pico connect to Wi-Fi?
Only the Pico W, Pico WH and Pico 2 W can; they include an Infineon CYW43439 wireless chip. The standard Pico and Pico 2 have no radio.
Can I use the Arduino IDE with a Pico?
Yes. Install the Raspberry Pi Pico/RP2040 board package (the community Arduino-Pico core by Earle Philhower) or the official Arduino Mbed OS RP2040 core.
What is the difference between RP2040 and RP2350?
The RP2350 in the Pico 2 is faster (150 MHz), has twice the RAM (520 KB), adds floating-point hardware, security features and a choice of Arm or RISC-V cores, while staying pin-compatible with the original Pico.
How do I reset a Pico that will not respond?
Hold BOOTSEL while plugging it in to enter USB drive mode, then drag on new firmware. To wipe everything, copy the official flash_nuke.uf2 file first.
Parts for this guide
Calculators
Terms in this guide
Projects that use it
Put this into practice: 38 step-by-step builds in our project library use parts from this guide.
Keep learning
Sources
- Raspberry Pi Pico datasheet (Raspberry Pi Ltd)
- Raspberry Pi Pico 2 datasheet (Raspberry Pi Ltd)
- RP2040 and RP2350 datasheets (Raspberry Pi Ltd)
- MicroPython documentation for the RP2 port
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




