Component guide · Intermediate · 4 min read
RISC-V and Tiny Linux Boards

StarFive VisionFive 2 (4GB and 8GB), Sipeed LicheePi 4A, BeagleV-Ahead TH1520, Lichee RV Dock D1, LicheeRV Nano B/E/W/WE SG2002, Luckfox Pico, Pico Plus, Pico Mini A and Pico Ultra
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These boards run full Linux. VisionFive 2, LicheePi 4A and BeagleV-Ahead are Raspberry Pi sized RISC-V computers with Debian or Ubuntu images, good for learning the RISC-V software stack. LicheeRV Nano (SG2002) and the Luckfox Pico family are tiny, cheap Linux boards with a camera input and NPU, built for embedded vision. Luckfox Pico boards use an Arm Cortex-A7 with a small RISC-V helper core.
Key specs at a glance
- SoCs
- JH7110 (VisionFive 2), TH1520 (LicheePi 4A, BeagleV-Ahead), Allwinner D1, SG2002, Rockchip RV1103/RV1106
- RAM
- 64 MB to 256 MB on tiny boards; 4 to 16 GB on SBCs
- Storage
- microSD, eMMC or SPI NAND by board
- AI
- NPU on TH1520, SG2002 and RV1103/RV1106
- I/O
- Ethernet, USB, MIPI CSI camera, GPIO headers
- OS
- Debian, Ubuntu, Buildroot; maker images
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1BeagleV-Ahead RISC-V SBC – TH1520, 4GB RAM, 16GB eMMC, WiFi₹14,463
Option 2Sipeed Lichee RV Dock Allwinner D1 RISC-V Dev Kit₹4,699
Option 3Sipeed LicheePi 4A RISC-V TH1520 Linux SBC₹17,689
Option 4Sipeed LicheeRV Nano (B) SG2002 RISC-V Linux Dev Board₹1,499
Option 5Sipeed LicheeRV Nano (E) SG2002 RISC-V Linux Dev Board₹1,689
Option 6Sipeed LicheeRV Nano (W) SG2002 RISC-V AI Linux Board₹2,059
What the RISC-V and tiny Linux boards: VisionFive 2, LicheePi 4A, BeagleV-Ahead, Lichee RV Dock, LicheeRV Nano and Luckfox Pico is
RISC-V Linux single-board computers, such as the StarFive VisionFive 2 and Sipeed LicheePi 4A, run Debian or Ubuntu on open RISC-V processors for learning and development.
Download the image from the maker's wiki for your exact board and RAM version, flash it to microSD with balenaEtcher, and watch the first boot on a USB to UART adapter at 115200 baud. Many tiny boards have no HDMI, so the serial console or SSH over Ethernet or USB is how you log in.
Software support is younger than on Raspberry Pi: some packages are missing for RISC-V and GPU or NPU acceleration needs the maker's SDK. Use a good 5 V supply (USB-C PD on VisionFive 2 and LicheePi 4A) and a heatsink on the bigger boards. LicheeRV Nano and Luckfox boards boot from SD or onboard flash and suit cameras, small gateways and robots.
RISC-V and tiny Linux boards: VisionFive 2, LicheePi 4A, BeagleV-Ahead, Lichee RV Dock, LicheeRV Nano and Luckfox Pico pinout
The pins on the RISC-V and tiny Linux boards: VisionFive 2, LicheePi 4A, BeagleV-Ahead, Lichee RV Dock, LicheeRV Nano and Luckfox Pico and what each one does.
| Pin | Function |
|---|---|
| USB-C | Power; also USB gadget networking on tiny boards |
| UART TX/RX/GND | Serial console at 115200 baud |
| 40-pin header | GPIO, I2C, SPI, UART on the larger SBCs |
| MIPI CSI | Camera input |
| Ethernet | SSH and network |
| Boot button | Recovery or flashing mode |
- USB-C
- Power; also USB gadget networking on tiny boards
- UART TX/RX/GND
- Serial console at 115200 baud
- 40-pin header
- GPIO, I2C, SPI, UART on the larger SBCs
- MIPI CSI
- Camera input
- Ethernet
- SSH and network
- Boot button
- Recovery or flashing mode
Wiring the RISC-V and tiny Linux boards: VisionFive 2, LicheePi 4A, BeagleV-Ahead, Lichee RV Dock, LicheeRV Nano and Luckfox Pico
GPIO pins are 3.3 V or 1.8 V; never connect 5 V signals directly.
| RISC-V and tiny Linux boards: VisionFive 2, LicheePi 4A, BeagleV-Ahead, Lichee RV Dock, LicheeRV Nano and Luckfox Pico pin | Connection | Note |
|---|---|---|
| USB to UART adapter | Console TX, RX, GND | 3.3 V levels, do not connect VCC |
| Power | USB-C 5 V supply | PD supply on big boards |
| Ethernet | Router | Find the IP in the router list |
| Camera | CSI connector | Contacts facing the right way |
- USB to UART adapter
- Connection:
- Console TX, RX, GND
- Note:
- 3.3 V levels, do not connect VCC
- Power
- Connection:
- USB-C 5 V supply
- Note:
- PD supply on big boards
- Ethernet
- Connection:
- Router
- Note:
- Find the IP in the router list
- Camera
- Connection:
- CSI connector
- Note:
- Contacts facing the right way
Example code
Replace /dev/sdX with your card reader's device; dd to the wrong disk erases it. On Luckfox Pico, uname shows armv7l because the main core is Arm.
# Flash the image (Linux; use balenaEtcher on Windows)
xzcat board-image.img.xz | sudo dd of=/dev/sdX bs=4M status=progress conv=fsync
# Watch the console from your PC
screen /dev/ttyUSB0 115200
# After login, confirm the CPU and architecture
uname -m # riscv64 on JH7110, TH1520, D1, SG2002
cat /proc/cpuinfo | head
free -h
ip addr # find the IP for SSHSetup and tuning
download the vendor's Debian or Ubuntu image and flash it to SD or eMMC.
set boot switches for SD, eMMC or NVMe as the manual shows.
many packages exist, but some apps and GPU drivers are still limited.
use the specified USB-C PD or DC supply.
keep a USB-serial adapter handy for boot debugging.
What you need
Shop this list15 of 15 found in our store · ₹1,03,999
BeagleV-Ahead RISC-V SBC – TH1520, 4GB RAM, 16GB eMMC, WiFi: the part this guide coversBeagleV-Ahead RISC-V SBC – TH1520, 4GB RAM, 16GB eMMC, WiFi₹14,463
Sipeed Lichee RV Dock Allwinner D1 RISC-V Dev Kit: another version this guide coversSipeed Lichee RV Dock Allwinner D1 RISC-V Dev Kit₹4,699
Sipeed LicheePi 4A RISC-V TH1520 Linux SBC: another version this guide coversSipeed LicheePi 4A RISC-V TH1520 Linux SBC₹17,689
Sipeed LicheeRV Nano (B) SG2002 RISC-V Linux Dev Board: another version this guide coversSipeed LicheeRV Nano (B) SG2002 RISC-V Linux Dev Board₹1,499
Sipeed LicheeRV Nano (E) SG2002 RISC-V Linux Dev Board: another version this guide coversSipeed LicheeRV Nano (E) SG2002 RISC-V Linux Dev Board₹1,689
Sipeed LicheeRV Nano (W) SG2002 RISC-V AI Linux Board: another version this guide coversSipeed LicheeRV Nano (W) SG2002 RISC-V AI Linux Board₹2,059
Sipeed LicheeRV Nano (WE) SG2002 RISC-V Linux Dev Board: another version this guide coversSipeed LicheeRV Nano (WE) SG2002 RISC-V Linux Dev Board₹2,249
StarFive VisionFive 2 RISC-V SBC 4GB RAM with WiFi: another version this guide coversStarFive VisionFive 2 RISC-V SBC 4GB RAM with WiFi₹10,289
VisionFive2 RISC-V SBC 8GB WiFi: another version this guide coversVisionFive2 RISC-V SBC 8GB WiFi₹16,309
VisionFive2 RISC-V SBC 8GB, StarFive JH7110 with 3D GPU: another version this guide coversVisionFive2 RISC-V SBC 8GB, StarFive JH7110 with 3D GPU₹10,549
VisionFive2 RISC-V SBC, StarFive JH7110, 4GB RAM: another version this guide coversVisionFive2 RISC-V SBC, StarFive JH7110, 4GB RAM₹8,759
LuckFox Pico RV1103 Linux Micro Development Board: another version this guide coversLuckFox Pico RV1103 Linux Micro Development Board₹1,739
LuckFox Pico Plus RV1103 Linux Dev Board w/ Ethernet: another version this guide coversLuckFox Pico Plus RV1103 Linux Dev Board w/ Ethernet₹2,779
Waveshare Luckfox Pico Mini A RV1103 Linux Dev Board: another version this guide coversWaveshare Luckfox Pico Mini A RV1103 Linux Dev Board₹1,569
Waveshare Luckfox Pico Ultra RV1106 Linux Dev Board w/ Wireless: another version this guide coversWaveshare Luckfox Pico Ultra RV1106 Linux Dev Board w/ Wireless₹7,659
Alternatives and when to choose them
- RISC-V dev boards: microcontroller RISC-V boards.
- Orange Pi and Radxa: Arm Linux SBCs.
- Edge AI boards: boards built for vision models.
Common mistakes to avoid
- Wrong boot switch setting.
- Expecting full desktop app support.
- Weak power supply.
- No serial console for debugging.
Frequently asked questions
Can I run Ubuntu on a VisionFive 2?
Yes. StarFive and Canonical publish Ubuntu and Debian images for it.
Is RISC-V software support mature?
Improving fast, but some apps and drivers are missing.
Why does my board not boot?
The boot switches point to the wrong device, or the image is for another board.
Is it faster than a Raspberry Pi?
Similar to older Pis; it is mainly for RISC-V learning.
Can I compile my own kernel?
Yes. The vendors publish kernel sources and build guides on GitHub.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
