Component guide · Intermediate · 4 min read
Slamtec RPLIDAR A1, A2, A3, S2, S2E, S3 360-Degree LiDAR, LPX Industrial Lidar

M2M2 Mapper, Aurora and Hermes Base
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
RPLIDAR sensors spin a laser to measure distances all around, producing a 2D map slice many times a second. The A1 (12 m diameter) is the popular starter for ROS robots, the A2 and A3 are faster and longer range, and the S2 and S3 use time-of-flight to reach 30 to 40 m outdoors. The LPX, M2M2 and Aurora are complete mapping and monitoring systems.
Key specs at a glance
- Range
- 12 m dia (A1), 16 to 25 m (A2, A3), 30 m (S2), 40 m (S3)
- Sample rate
- 8,000 (A1) to 32,000 (S3) points per second
- Scan rate
- About 5 to 15 Hz
- Interface
- UART via USB adapter (A, S series), Ethernet (S2E)
- Supply
- 5 V (A1 to S2), 12 V (S2E, industrial)
- Software
- RPLIDAR SDK, ROS / ROS 2 driver, RoboStudio
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Slamtec RPLIDAR A1M8 360° Laser Range Finder 6m Radius – 12m Diameter₹9,899
Option 2Slamtec RPLIDAR A2M8 360° Laser Range Finder 12m Radius – USB & DC Cable w/ Adapter Driver Board₹31,449
Option 3Slamtec RPLIDAR A3M1 360° Laser Scanner 25m Range – TTL UART Interface₹56,989
Option 4Slamtec RPLiDAR S2L 360 Degree Laser Range Scanner – 18M Range, IP65, Class 1 Eye Safe₹27,779
Option 5Slamtec RPLiDAR S2E S2M1-R2E 360° Laser Range Scanner – 30m Range, 2D Point Cloud, IP65, Ethernet UDP₹37,799
Option 6Slamtec S3 SL-TOF RPLIDAR 360 Degree Laser Range Finder (Range: 40m)₹45,040
What the Slamtec RPLIDAR 360-degree LiDAR is
Slamtec RPLIDAR sensors, such as the A1, A2, C1 and S2, are 360° rotating laser scanners used for robot mapping, SLAM and obstacle avoidance.
The included USB adapter powers the motor and the laser; connect it to a Raspberry Pi or PC and run the Slamtec ROS 2 driver to get a /scan topic.
For SLAM, combine with wheel odometry and a package such as slam_toolbox or Cartographer.
Slamtec RPLIDAR 360-degree LiDAR pinout
The pins on the Slamtec RPLIDAR 360-degree LiDAR and what each one does.
| Pin | Function |
|---|---|
| 5 V, GND | Core power |
| TX, RX | UART (3.3 V) |
| MOTOCTL | Motor PWM (A series) |
| USB adapter | Power and data to the host |
- 5 V, GND
- Core power
- TX, RX
- UART (3.3 V)
- MOTOCTL
- Motor PWM (A series)
- USB adapter
- Power and data to the host
Wiring the Slamtec RPLIDAR 360-degree LiDAR
Connect the Slamtec RPLIDAR 360-degree LiDAR like this.
| Slamtec RPLIDAR 360-degree LiDAR pin | Raspberry Pi | PC |
|---|---|---|
| USB adapter | Raspberry Pi USB port | PC USB port |
| Power | From USB (5 V, 2 A supply recommended) | From USB |
| ROS 2 | sllidar_ros2 driver | RoboStudio viewer |
- USB adapter
- Raspberry Pi:
- Raspberry Pi USB port
- PC:
- PC USB port
- Power
- Raspberry Pi:
- From USB (5 V, 2 A supply recommended)
- PC:
- From USB
- ROS 2
- Raspberry Pi:
- sllidar_ros2 driver
- PC:
- RoboStudio viewer
Example code
A minimal sketch to check the part works.
from rplidar import RPLidar # pip install rplidar-roboticia
lidar = RPLidar("/dev/ttyUSB0") # S-series and A3 use higher baud rates
try:
for scan in lidar.iter_scans():
nearest = min(scan, key=lambda p: p[2]) # (quality, angle, distance mm)
print(f"{len(scan)} points, nearest {nearest[2]:.0f} mm at {nearest[1]:.0f} deg")
finally:
lidar.stop(); lidar.disconnect()Setup and tuning
plug in the USB adapter; on Linux it appears as /dev/ttyUSB0.
use RoboStudio to test, then the rplidar_ros or sllidar_ros2 driver for ROS.
mount level with a clear 360° view, high on the robot.
the A1 motor needs 5 V at enough current; use a powered USB port.
A1 reaches about 12 m, S2 up to 30 m.
What you need
Shop this list14 of 14 found in our store · ₹13,99,908
Slamtec RPLIDAR A1M8 360° Laser Range Finder 6m Radius – 12m Diameter: the part this guide coversSlamtec RPLIDAR A1M8 360° Laser Range Finder 6m Radius – 12m Diameter₹9,899
Slamtec RPLIDAR A2M8 360° Laser Range Finder 12m Radius – USB & DC Cable w/ Adapter Driver Board: another version this guide coversSlamtec RPLIDAR A2M8 360° Laser Range Finder 12m Radius – USB & DC Cable w/ Adapter Driver Board₹31,449
Slamtec RPLIDAR A3M1 360° Laser Scanner 25m Range – TTL UART Interface: another version this guide coversSlamtec RPLIDAR A3M1 360° Laser Scanner 25m Range – TTL UART Interface₹56,989
Slamtec RPLiDAR S2L 360 Degree Laser Range Scanner – 18M Range, IP65, Class 1 Eye Safe: another version this guide coversSlamtec RPLiDAR S2L 360 Degree Laser Range Scanner – 18M Range, IP65, Class 1 Eye Safe₹27,779
Slamtec RPLiDAR S2E S2M1-R2E 360° Laser Range Scanner – 30m Range, 2D Point Cloud, IP65, Ethernet UDP: another version this guide coversSlamtec RPLiDAR S2E S2M1-R2E 360° Laser Range Scanner – 30m Range, 2D Point Cloud, IP65, Ethernet UDP₹37,799
Slamtec S3 SL-TOF RPLIDAR 360 Degree Laser Range Finder (Range: 40m): another version this guide coversSlamtec S3 SL-TOF RPLIDAR 360 Degree Laser Range Finder (Range: 40m)₹45,040
Slamtec LPX-E3 Industrial Field Monitoring Lidar Sensor (40m Range) – 9-30V DC, IP65: another version this guide coversSlamtec LPX-E3 Industrial Field Monitoring Lidar Sensor (40m Range) – 9-30V DC, IP65₹29,579
Slamtec LPX-T1M4 Industrial Field Monitoring Lidar Sensor (Range: 40m) – 270° FOV, 60k Samples/sec: another version this guide coversSlamtec LPX-T1M4 Industrial Field Monitoring Lidar Sensor (Range: 40m) – 270° FOV, 60k Samples/sec₹73,499
Slamtec M2M2 Advanced Lidar Mapper for Robot Localization & Navigation, Environment Mapping (Range: 40m): another version this guide coversSlamtec M2M2 Advanced Lidar Mapper for Robot Localization & Navigation, Environment Mapping (Range: 40m)₹48,299
Slamtec Aurora S Compact 3D LiDAR AI Spatial Perception System, 6DOF, 40m Range – ROS/C++/Python SDK: another version this guide coversSlamtec Aurora S Compact 3D LiDAR AI Spatial Perception System, 6DOF, 40m Range – ROS/C++/Python SDK₹1,32,599
Slamtec SDK-HERMES Robot Base Platform – S2 LIDAR, 80KG Payload, 1.2m/s Speed: another version this guide coversSlamtec SDK-HERMES Robot Base Platform – S2 LIDAR, 80KG Payload, 1.2m/s Speed₹8,15,999
Raspberry Pi 5 single board computer: to run ROS or Python for scanning LiDARRaspberry Pi 5 16GB RAM Single Board Computer₹36,169Closest match, check the specs
NVIDIA Jetson Orin Nano Super developer kit: to process point clouds and depthNVIDIA Jetson Orin Nano Super Developer Kit₹54,724
USB to TTL serial converter: to talk to the module from a PCUSB to TTL Serial Converter (CH340G / CP2102 / FT232RL / PL2303)₹85Closest match, check the specs
Alternatives and when to choose them
- YDLIDAR 360 LiDAR: similar, wide range of models.
- LDRobot and other 2D LiDAR: low-cost and industrial.
- 3D LiDAR: full point clouds.
Common mistakes to avoid
- Mounting it tilted.
- Weak USB power.
- Wrong baud rate.
- Blocking the view with robot parts.
Frequently asked questions
How do I use RPLIDAR with ROS 2?
Install sllidar_ros2 and launch the file for your model to publish /scan.
Why does the RPLIDAR spin but give no data?
Wrong baud rate or model setting in the driver.
Which model should I choose?
A1 or C1 for small indoor robots; S2 for larger or outdoor robots.
Can RPLIDAR work outdoors?
C1 and S-series handle sunlight better than the A1.
Why is my map distorted?
The LiDAR is tilted or the robot moves too fast.
Parts for this guide
- ₹9,899View
- ₹31,449View
- ₹56,989View
- ₹27,779View
Slamtec RPLiDAR S2E S2M1-R2E 360° Laser Range Scanner – 30m Range, 2D Point Cloud, IP65, Ethernet UDP₹37,799View- ₹45,040View
- ₹29,579View
- ₹73,499View
Slamtec M2M2 Advanced Lidar Mapper for Robot Localization & Navigation, Environment Mapping (Range: 40m)₹48,299View
Slamtec Aurora S Compact 3D LiDAR AI Spatial Perception System, 6DOF, 40m Range – ROS/C++/Python SDK₹1,32,599View- ₹8,15,999View
- ₹36,169View
- ₹54,724View
- ₹85View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
