Component guide · Advanced · 7 min read
RS485 Modbus Water Quality Sensors

Renke, Desun Uniwill and FirstRate pH, ORP, Conductivity, Dissolved Oxygen, Turbidity, Residual Chlorine, COD, BOD, TOC, Ammonia, Nitrate, Chlorophyll and Oil-in-Water
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These sensors measure water quality and report it over RS485 Modbus RTU, so a PLC, data logger or ESP32 with a converter can read them directly. Use them for fish farms, water treatment, swimming pools, effluent and river monitoring. pH and ORP sensors need regular calibration; optical sensors such as fluorescence DO and turbidity need less, and some have automatic wiper cleaning.
Key specs at a glance
- Parameters
- pH, ORP, EC/TDS, DO, turbidity, chlorine, COD, BOD, TOC, NH4-N, NO3-N, chlorophyll, oil in water
- Output
- RS485 Modbus RTU, some also 4-20mA
- Supply
- Typically 12-24V DC
- Protection
- IP68 immersion types
- Temperature
- Built-in compensation on most
- Cleaning
- Automatic brush on some optical sensors
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Renke RS-PH-N01-2-201T Industrial pH Sensor, 0-14.00pH, 0-80°C, RS485/4-20mA/0-5V/0-10V Output, IP65₹15,369
Option 2FirstRate FST100-PH104A pH Sensor, Range: 0-14pH, RS485 Modbus, 5m Cable, NPT3/4 Port, IP68₹17,839
Option 3SN-300HHT-PH-N01-201T Handheld Water Quality pH Transmitter (RS485 Modbus)₹12,420
Option 4Renke RS-ORP-N01-2-300 ORP Sensor -1999~1999mV, RS485 Modbus₹15,749
Option 5SN-3003-ORP-N01-300T Industrial ORP Sensor with Temperature Probe – RS485 Modbus, IP68 Waterproof₹7,829
Option 6Renke RS-EC-N01-2-SUS01 Water Conductivity Sensor -20~100℃, RS485/4-20mA/0-10V/0-5V Output₹14,619
What the RS485 Modbus water quality sensors (pH, ORP, EC, DO, turbidity, chlorine, COD) is
RS485 water quality sensors measure pH, EC/TDS, dissolved oxygen, turbidity, ORP or chlorine and report readings over Modbus for aquaculture, hydroponics and water treatment.
Start from the parameter you must control: pH and ORP for pools and dosing, DO for aquaculture aeration, EC for nutrient and salinity, turbidity and chlorine for drinking water, and COD, BOD, ammonia or nitrate for effluent reports.
Each sensor has its own Modbus address, so several can share one RS485 line if you give them different addresses. Calibrate pH with buffer solutions (for example 4.00, 6.86 and 9.18) as the manual says, keep electrodes wet, and clean optical windows on a schedule.
RS485 Modbus water quality sensors (pH, ORP, EC, DO, turbidity, chlorine, COD) pinout
The pins on the RS485 Modbus water quality sensors (pH, ORP, EC, DO, turbidity, chlorine, COD) and what each one does.
| Pin | Function |
|---|---|
| Brown or red | +V supply, 5-30V or 12-24V DC |
| Black | 0V |
| Yellow or green | RS485 A (D+) |
| Blue or white | RS485 B (D-) |
| Shield | Earth at one end only |
- Brown or red
- +V supply, 5-30V or 12-24V DC
- Black
- 0V
- Yellow or green
- RS485 A (D+)
- Blue or white
- RS485 B (D-)
- Shield
- Earth at one end only
Wiring the RS485 Modbus water quality sensors (pH, ORP, EC, DO, turbidity, chlorine, COD)
Keep the electrode wet when stored. Give each sensor a unique Modbus address before connecting several to one bus.
| RS485 Modbus water quality sensors (pH, ORP, EC, DO, turbidity, chlorine, COD) pin | Connection | Note |
|---|---|---|
| +V | 12 or 24V DC supply | Check the label |
| 0V | Supply 0V | Common with the converter GND |
| A | Converter A / D+ | Twisted pair |
| B | Converter B / D- | Terminate long runs with 120 ohm |
- +V
- Connection:
- 12 or 24V DC supply
- Note:
- Check the label
- 0V
- Connection:
- Supply 0V
- Note:
- Common with the converter GND
- A
- Connection:
- Converter A / D+
- Note:
- Twisted pair
- B
- Connection:
- Converter B / D-
- Note:
- Terminate long runs with 120 ohm
Example code
Register addresses, decimals and default baud differ by maker. Check the sensor's Modbus table before trusting a value.
# pip install minimalmodbus
import minimalmodbus, time
s = minimalmodbus.Instrument("/dev/ttyUSB0", 1) # COM3 on Windows, slave address 1
s.serial.baudrate = 4800 # many Renke-style sensors ship at 4800; others use 9600
s.serial.timeout = 1
while True:
raw = s.read_register(0, 2) # register 0 with 2 decimals; see the sensor's register map
print("Reading:", raw)
time.sleep(2)Setup and tuning
typically 12 to 24 V DC.
A and B to RS485; keep cables away from pumps and motors.
calibrate pH with buffer solutions and EC with standard solutions regularly.
keep probes submerged at the right depth and away from bubbles.
clean probes on a schedule to prevent fouling.
What you need
Shop this list20 of 20 found in our store · ₹5,12,221
Renke RS-PH-N01-2-201T Industrial pH Sensor, 0-14.00pH, 0-80°C, RS485/4-20mA/0-5V/0-10V Output, IP65: the part this guide coversRenke RS-PH-N01-2-201T Industrial pH Sensor, 0-14.00pH, 0-80°C, RS485/4-20mA/0-5V/0-10V Output, IP65₹15,369
FirstRate FST100-PH104A pH Sensor, Range: 0-14pH, RS485 Modbus, 5m Cable, NPT3/4 Port, IP68: another version this guide coversFirstRate FST100-PH104A pH Sensor, Range: 0-14pH, RS485 Modbus, 5m Cable, NPT3/4 Port, IP68₹17,839
SN-300HHT-PH-N01-201T Handheld Water Quality pH Transmitter (RS485 Modbus): another version this guide coversSN-300HHT-PH-N01-201T Handheld Water Quality pH Transmitter (RS485 Modbus)₹12,420
Renke RS-ORP-N01-2-300 ORP Sensor -1999~1999mV, RS485 Modbus: another version this guide coversRenke RS-ORP-N01-2-300 ORP Sensor -1999~1999mV, RS485 Modbus₹15,749
SN-3003-ORP-N01-300T Industrial ORP Sensor with Temperature Probe – RS485 Modbus, IP68 Waterproof: another version this guide coversSN-3003-ORP-N01-300T Industrial ORP Sensor with Temperature Probe – RS485 Modbus, IP68 Waterproof₹7,829
Renke RS-EC-N01-2-SUS01 Water Conductivity Sensor -20~100℃, RS485/4-20mA/0-10V/0-5V Output: another version this guide coversRenke RS-EC-N01-2-SUS01 Water Conductivity Sensor -20~100℃, RS485/4-20mA/0-10V/0-5V Output₹14,619
Renke RS-EC-N01-3-10-EX Integrated Conductivity Sensor (RS485 Modbus-RTU) K=10, 5m Cable: another version this guide coversRenke RS-EC-N01-3-10-EX Integrated Conductivity Sensor (RS485 Modbus-RTU) K=10, 5m Cable₹11,189
SN-3003-EC-N01-01 Four Electrodes EC Sensor – RS485 Modbus, IP68 Waterproof: another version this guide coversSN-3003-EC-N01-01 Four Electrodes EC Sensor – RS485 Modbus, IP68 Waterproof₹14,689
FirstRate FST100-EC106 Electrical Conductivity Sensor, Range: 0-5000uS/cm, RS485 Modbus, 4-20mA, Stainless Steel, IP68, 5m Cable: another version this guide coversFirstRate FST100-EC106 Electrical Conductivity Sensor, Range: 0-5000uS/cm, RS485 Modbus, 4-20mA, Stainless Steel, IP68, 5m Cable₹26,569
Desun Uniwill DS480 Conductivity Sensor, 0-300mS/cm, RS485 Output, IP68 Waterproof: another version this guide coversDesun Uniwill DS480 Conductivity Sensor, 0-300mS/cm, RS485 Output, IP68 Waterproof₹33,019
Renke SN-300HHT-EC-N01-01 Handheld Water Quality EC Transmitter – RS485 Modbus, 2.8″ Display: another version this guide coversRenke SN-300HHT-EC-N01-01 Handheld Water Quality EC Transmitter – RS485 Modbus, 2.8″ Display₹18,029
Desun Uniwill DS285 TDS Sensor, 0-60PPT, RS485 Modbus Output, SS316 + PPEK Body, IP68: another version this guide coversDesun Uniwill DS285 TDS Sensor, 0-60PPT, RS485 Modbus Output, SS316 + PPEK Body, IP68₹34,649
LFS1305 CLASS C / F0.6 Conductivity Sensor 100 µS/cm–200 mS/cm, 4 Electrode: another version this guide coversLFS1305 CLASS C / F0.6 Conductivity Sensor 100 µS/cm–200 mS/cm, 4 Electrode₹4,499
Renke RS-LDO-N01-2-20 Dissolved Oxygen Sensor, 0~20mg/L, IP68, RS485 Modbus, 5m Cable: another version this guide coversRenke RS-LDO-N01-2-20 Dissolved Oxygen Sensor, 0~20mg/L, IP68, RS485 Modbus, 5m Cable₹17,129
SN-3001-LDO-N01-20 Fluorescence Dissolved Oxygen Sensor – RS485 Output, IP68: another version this guide coversSN-3001-LDO-N01-20 Fluorescence Dissolved Oxygen Sensor – RS485 Output, IP68₹13,959
FirstRate FST100-DO202A Dissolved Oxygen Sensor, 0-20 mg/L, RS485 Output, 5m Cable, IP68, NPT3/4 Port: another version this guide coversFirstRate FST100-DO202A Dissolved Oxygen Sensor, 0-20 mg/L, RS485 Output, 5m Cable, IP68, NPT3/4 Port₹30,639
Desun Uniwill DS380 Fluorescence Dissolved Oxygen Sensor, 0–20 mg/L, RS485 Modbus Output, IP68 Submersible: another version this guide coversDesun Uniwill DS380 Fluorescence Dissolved Oxygen Sensor, 0–20 mg/L, RS485 Modbus Output, IP68 Submersible₹47,549
Desun Uniwill DYS-1 Portable Dissolved Oxygen Meter with DS380 Sensor, 0-20mg/l, RS485 Modbus Output: another version this guide coversDesun Uniwill DYS-1 Portable Dissolved Oxygen Meter with DS380 Sensor, 0-20mg/l, RS485 Modbus Output₹62,999
Renke RS-ZD-N01-1S-1000 Turbidity Sensor 0-4000NTU, IP68, RS485 Modbus, 5m Cable: another version this guide coversRenke RS-ZD-N01-1S-1000 Turbidity Sensor 0-4000NTU, IP68, RS485 Modbus, 5m Cable₹27,359
FirstRate ST100-ZD102 Turbidity Sensor, 0-4000 NTU, 4-20mA & RS485 Modbus, 316 Stainless Steel, IP68, 5m Cable: another version this guide coversFirstRate ST100-ZD102 Turbidity Sensor, 0-4000 NTU, 4-20mA & RS485 Modbus, 316 Stainless Steel, IP68, 5m Cable₹86,119
Alternatives and when to choose them
- Analog pH sensor: low-cost maker option.
- Analog turbidity sensor: simple turbidity.
- pH and TDS pen meters: spot checks by hand.
Common mistakes to avoid
- Skipping calibration.
- Letting probes dry out.
- Placing probes in bubbles.
- Running cables next to pump wires.
Frequently asked questions
How often should I calibrate a pH probe?
Every 2 to 4 weeks in continuous use, with pH 4 and 7 buffers.
Why does the pH reading drift?
Fouling on the glass bulb, an ageing probe or missed calibration all cause drift.
Can I use several water sensors on one bus?
Yes, as long as each sensor has a unique Modbus address.
Why are dissolved oxygen readings unstable?
Bubbles on the membrane or too little water flow past the probe.
How long do pH probes last?
About 1 to 2 years, depending on the water and how well they are kept wet.
Parts for this guide
Renke RS-PH-N01-2-201T Industrial pH Sensor, 0-14.00pH, 0-80°C, RS485/4-20mA/0-5V/0-10V Output, IP65₹15,369View- ₹17,839View
- ₹12,420View
- ₹15,749View
- ₹7,829View
- ₹14,619View
- ₹11,189View
- ₹14,689View
FirstRate FST100-EC106 Electrical Conductivity Sensor, Range: 0-5000uS/cm, RS485 Modbus, 4-20mA, Stainless Steel, IP68, 5m Cable₹26,569View- ₹33,019View
- ₹18,029View
- ₹34,649View
- ₹4,499View
- ₹17,129View
- ₹13,959View
FirstRate FST100-DO202A Dissolved Oxygen Sensor, 0-20 mg/L, RS485 Output, 5m Cable, IP68, NPT3/4 Port₹30,639View
Desun Uniwill DS380 Fluorescence Dissolved Oxygen Sensor, 0–20 mg/L, RS485 Modbus Output, IP68 Submersible₹47,549View
Desun Uniwill DYS-1 Portable Dissolved Oxygen Meter with DS380 Sensor, 0-20mg/l, RS485 Modbus Output₹62,999View- ₹27,359View
FirstRate ST100-ZD102 Turbidity Sensor, 0-4000 NTU, 4-20mA & RS485 Modbus, 316 Stainless Steel, IP68, 5m Cable₹86,119View
Desun Uniwill DSS410 Fiber Optical Turbidity Sensor, 0-4000NTU, RS485 Modbus Output, IP68 Waterproof₹83,999View- ₹45,189View
- ₹25,769View
- ₹43,789View
- ₹58,479View
- ₹1,70,079View
- ₹1,73,399View
- ₹1,73,399View
- ₹1,33,159View
- ₹1,17,299View
- ₹1,33,059View
- ₹69,949View
- ₹82,559View
- ₹74View
- ₹411View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.














