Component guide · Advanced · 4 min read
SICK MPS Cylinder Position Sensors

MPS-025, MPS-032, MPS-064, MPS-160, MPS-200 and MPS-256 in T-Slot and C-Slot Versions with Analog, Switching and IO-Link Outputs
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
MPS sensors clip into the slot of a pneumatic cylinder and follow the piston magnet through the wall, giving its position along the whole stroke instead of just end-of-stroke switching. The number in the name is the measuring length in mm (025 to 256). T-type fits T-slots, C-type fits C-slots. Outputs are 0-10V or 4-20 mA analog, and the -LT and -LTU versions add switching points and IO-Link.
Key specs at a glance
- Measuring range
- 25, 32, 64, 160, 200 or 256mm
- Slot
- T-slot (TS) or C-slot (CL)
- Outputs
- Analog 0-10V or 4-20 mA; switching and IO-Link on some
- Supply
- 12-30V or 15-30V DC
- Connector
- M8 4-pin on cable
- Resolution
- About 0.05mm typical
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1SICK MPS-025CLTP0 Cylinder Position Sensor, C-Type, IO-Link, Cable with 4 Pin M8, 12-30VDC, 25mm Range₹40,949
Option 2SICK MPS-025CLTU0 Cylinder Position Sensor, C-Type, NPN/PNP/Push-Pull/Analog/IO-Link, 2m 4-Wire Cable₹38,089
Option 3SICK MPS-032TSNP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15-30VDC, IP67, Range: 32mm₹34,119
Option 4SICK MPS-032TSTP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15-30VDC, IP67, Range: 32mm₹36,739
Option 5SICK MPS-064TSTP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15VDC to 30VDC, IP67, Range: 64mm₹40,279
Option 6SICK MPS-160TSNP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15 to 30VDC, IP67, Range: 160mm₹48,569
What the SICK MPS cylinder position sensors for T-slot and C-slot pneumatic cylinders is
SICK MPS cylinder position sensors mount in the T-slot of pneumatic cylinders and measure piston position continuously with an analog or IO-Link output.
Pick the measuring range that covers the cylinder stroke, and the slot type that matches the cylinder profile. The cylinder piston must have a magnet, which most modern cylinders do.
Teach the start and end points with the teach-in button or over IO-Link after mounting. The analog output then scales across that span. Keep strong magnets and steel brackets away from the sensor face, and mount it before tightening the cylinder brackets so it sits flat.
SICK MPS cylinder position sensors for T-slot and C-slot pneumatic cylinders pinout
The pins on the SICK MPS cylinder position sensors for T-slot and C-slot pneumatic cylinders and what each one does.
| Pin | Function |
|---|---|
| Brown (1) | +24V DC |
| White (2) | Analog output or switching output 2 |
| Blue (3) | 0V |
| Black (4) | Switching output or IO-Link C/Q |
| Teach button | On the housing |
- Brown (1)
- +24V DC
- White (2)
- Analog output or switching output 2
- Blue (3)
- 0V
- Black (4)
- Switching output or IO-Link C/Q
- Teach button
- On the housing
Wiring the SICK MPS cylinder position sensors for T-slot and C-slot pneumatic cylinders
Use the PLC's analog input type that matches the sensor's output version.
| SICK MPS cylinder position sensors for T-slot and C-slot pneumatic cylinders pin | Connection | Note |
|---|---|---|
| Brown | 24V DC | PLC supply |
| Blue | 0V | Common |
| White | PLC analog input | 0-10V or 4-20 mA |
| Black | IO-Link master port | Or digital input |
- Brown
- Connection:
- 24V DC
- Note:
- PLC supply
- Blue
- Connection:
- 0V
- Note:
- Common
- White
- Connection:
- PLC analog input
- Note:
- 0-10V or 4-20 mA
- Black
- Connection:
- IO-Link master port
- Note:
- Or digital input
Example code
IO-Link versions can be taught and read over the IO-Link master instead of the button.
1. Slide the sensor into the cylinder slot and tighten lightly.
2. Wire to 24V, 0V and the PLC input.
3. Move the cylinder to its retracted end and teach point 1.
4. Move to the extended end and teach point 2.
5. Check the analog value changes smoothly across the stroke.
6. Tighten the clamping screw and lock the teach button if needed.Setup and tuning
slide into the cylinder T-slot and fix the screw.
teach start and end points with the button or IO-Link.
use 4 to 20 mA, 0 to 10 V or IO-Link to a PLC.
the cylinder piston needs a magnet.
15 to 30 V DC.
What you need
Shop this list8 of 8 found in our store · ₹3,72,212
SICK MPS-025CLTP0 Cylinder Position Sensor, C-Type, IO-Link, Cable with 4 Pin M8, 12-30VDC, 25mm Range: the part this guide coversSICK MPS-025CLTP0 Cylinder Position Sensor, C-Type, IO-Link, Cable with 4 Pin M8, 12-30VDC, 25mm Range₹40,949
SICK MPS-025CLTU0 Cylinder Position Sensor, C-Type, NPN/PNP/Push-Pull/Analog/IO-Link, 2m 4-Wire Cable: another version this guide coversSICK MPS-025CLTU0 Cylinder Position Sensor, C-Type, NPN/PNP/Push-Pull/Analog/IO-Link, 2m 4-Wire Cable₹38,089
SICK MPS-032TSNP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15-30VDC, IP67, Range: 32mm: another version this guide coversSICK MPS-032TSNP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15-30VDC, IP67, Range: 32mm₹34,119
SICK MPS-032TSTP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15-30VDC, IP67, Range: 32mm: another version this guide coversSICK MPS-032TSTP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15-30VDC, IP67, Range: 32mm₹36,739
SICK MPS-064TSTP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15VDC to 30VDC, IP67, Range: 64mm: another version this guide coversSICK MPS-064TSTP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15VDC to 30VDC, IP67, Range: 64mm₹40,279
SICK MPS-160TSNP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15 to 30VDC, IP67, Range: 160mm: another version this guide coversSICK MPS-160TSNP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15 to 30VDC, IP67, Range: 160mm₹48,569
SICK MPS-200CLTP0 Cylinder Position Sensor, C-Type, 200mm Range – Analog/Digital/IO-Link, 4-Pin M8 Cable: another version this guide coversSICK MPS-200CLTP0 Cylinder Position Sensor, C-Type, 200mm Range – Analog/Digital/IO-Link, 4-Pin M8 Cable₹65,049
SICK MPS-256TSTU0 Cylinder Position Sensor, T-Type, Analogue Output, 2m 4-Wire Cable, 15-30VDC, IP67, 256mm Range: another version this guide coversSICK MPS-256TSTU0 Cylinder Position Sensor, T-Type, Analogue Output, 2m 4-Wire Cable, 15-30VDC, IP67, 256mm Range₹68,419
Alternatives and when to choose them
- Potentiometric displacement sensors: external rod sensors.
- Linear position sensors: all types.
- Industrial photoelectric sensors: other SICK sensors.
Common mistakes to avoid
- Cylinder without magnet.
- Skipping teach.
- Steel brackets near the sensor.
- 10 V into 3.3 V ADC.
Frequently asked questions
Does the cylinder need a magnetic piston?
Yes. The MPS senses the magnet on the piston, so the cylinder must have one.
How do I teach the range?
Move the piston to each end and press the teach button.
Can I use IO-Link?
Yes. Many MPS versions support IO-Link for setup and data.
Why does the reading jump?
A weak piston magnet or nearby steel parts disturb the field.
Can I read it with Arduino?
Use a divider for 0 to 10 V or a resistor for 4 to 20 mA.
Parts for this guide
SICK MPS-025CLTP0 Cylinder Position Sensor, C-Type, IO-Link, Cable with 4 Pin M8, 12-30VDC, 25mm Range₹40,949View
SICK MPS-025CLTU0 Cylinder Position Sensor, C-Type, NPN/PNP/Push-Pull/Analog/IO-Link, 2m 4-Wire Cable₹38,089View
SICK MPS-032TSNP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15-30VDC, IP67, Range: 32mm₹34,119View
SICK MPS-032TSTP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15-30VDC, IP67, Range: 32mm₹36,739View
SICK MPS-064TSTP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15VDC to 30VDC, IP67, Range: 64mm₹40,279View
SICK MPS-160TSNP0 Cylinder Position Sensor, T-Type, Analogue, Cable with 4 Pin M8, 15 to 30VDC, IP67, Range: 160mm₹48,569View
SICK MPS-200CLTP0 Cylinder Position Sensor, C-Type, 200mm Range – Analog/Digital/IO-Link, 4-Pin M8 Cable₹65,049View
SICK MPS-256TSTU0 Cylinder Position Sensor, T-Type, Analogue Output, 2m 4-Wire Cable, 15-30VDC, IP67, 256mm Range₹68,419View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
