Component guide · Intermediate · 6 min read
Linear Displacement Sensors

MIRAN KTC1 Pull-Rod, KTF1 Slider and LS2 Flange Types, SOP KTC-R, KTF-R, KTR2-R Spring Return, KPM-R and KPZ-R Mini Rod Sensors, Eurosensor ELPM and VLP and LXTHUS ILT Linear Position Sensors (25 to 800mm Stroke)
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These sensors are long, precise potentiometers. A rod or slider moves a wiper along a resistive track, so the output voltage is proportional to position. Pull-rod types (KTC, KTF) mount on machine beds and injection moulding machines, spring-return types (KTR2) push against the moving part, and Eurosensor and LXTHUS cylinders suit tight spaces. Some MIRAN versions add a built-in 0-10V, 4-20 mA or RS485 transmitter.
Key specs at a glance
- Stroke
- 25 to 800mm depending on model
- Resistance
- 2.5, 5 or 10 kΩ
- Linearity
- ±0.05% to ±1%
- Supply
- Up to 28-42V DC across the track; use 5V for a microcontroller
- Outputs
- Resistive divider; MIRAN transmitter versions give 0-5V, 0-10V, 4-20 mA or RS485
- Connector
- Cable or Hirschmann plug on LS2 and KTC
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1MIRAN KTC1-130MM Short-Stroke Rod Type Linear Displacement Sensor – 0-130mm Stroke, 0-5V/10V/4-20mA/RS485 Output₹5,099
Option 2MIRAN KTC1-150MM KTC Pull-Rod Type Linear Displacement Sensor – 0-150mm Stroke, 0-5V/0-10V/4-20mA/RS485 Output, Flange Mount₹5,359
Option 3MIRAN KTC1-300MM Pull-Rod Type Linear Displacement Sensor – 0-300mm Stroke, 0-5V/0-10V/4-20mA/RS485 Output₹7,289
Option 4MIRAN KTC1-500MM Pull-Rod Type Linear Displacement Sensor – Voltage/Current/RS485 Modbus Output₹14,009
Option 5MIRAN KTF1-130MM Slider Type Linear Displacement Sensor – 130mm Stroke, Potentiometer, 28V DC₹5,329
Option 6MIRAN KTF1-550MM Slider Type Linear Displacement Sensor – Resistance Output, 550mm Stroke₹10,459
What the Potentiometric rod and slider displacement sensors: MIRAN KTC, KTF and LS2, SOP KTC, KTF, KTR, KPM and KPZ, Eurosensor ELPM and VLP is
Potentiometric rod displacement sensors, such as KTC and KTR linear transducers, use a sliding contact on a resistive track to measure linear position on machines and presses.
Wire the two ends of the track to supply and ground and read the wiper. Connect the wiper to a high-impedance input (an ADC or op-amp), never use it to drive a load, or linearity suffers and the track can burn.
Mount the rod parallel to the motion, use the ball joints on articulated types to absorb small misalignment, and keep the stroke inside the electrical range. Calibrate by reading both ends of travel and scaling in software.
Potentiometric rod and slider displacement sensors: MIRAN KTC, KTF and LS2, SOP KTC, KTF, KTR, KPM and KPZ, Eurosensor ELPM and VLP pinout
The pins on the Potentiometric rod and slider displacement sensors: MIRAN KTC, KTF and LS2, SOP KTC, KTF, KTR, KPM and KPZ, Eurosensor ELPM and VLP and what each one does.
| Pin | Function |
|---|---|
| Pin 1 | Supply end of track |
| Pin 2 | Wiper (output) |
| Pin 3 | Ground end of track |
| Transmitter versions | V+, GND, output or RS485 A/B |
| Shield | Ground at one end only |
- Pin 1
- Supply end of track
- Pin 2
- Wiper (output)
- Pin 3
- Ground end of track
- Transmitter versions
- V+, GND, output or RS485 A/B
- Shield
- Ground at one end only
Wiring the Potentiometric rod and slider displacement sensors: MIRAN KTC, KTF and LS2, SOP KTC, KTF, KTR, KPM and KPZ, Eurosensor ELPM and VLP
Use shielded cable on long runs near motors, and ground the shield at the controller end only.
| Potentiometric rod and slider displacement sensors: MIRAN KTC, KTF and LS2, SOP KTC, KTF, KTR, KPM and KPZ, Eurosensor ELPM and VLP pin | Arduino | Note |
|---|---|---|
| Track end 1 | 5V | Same reference as the ADC |
| Wiper | A0 | High impedance only |
| Track end 2 | GND | Swap ends to reverse direction |
- Track end 1
- Arduino:
- 5V
- Note:
- Same reference as the ADC
- Wiper
- Arduino:
- A0
- Note:
- High impedance only
- Track end 2
- Arduino:
- GND
- Note:
- Swap ends to reverse direction
Example code
For a 4-20 mA version, read it across a 250Ω resistor and scale 1-5V to the stroke instead.
// Wire the sensor as a voltage divider: ends to 5V and GND, wiper to A0.
const float STROKE_MM = 150.0; // electrical stroke of your sensor
int rawMin = 20; // reading at fully retracted (calibrate)
int rawMax = 1003; // reading at fully extended (calibrate)
void setup() { Serial.begin(9600); }
void loop() {
long sum = 0;
for (int i = 0; i < 16; i++) sum += analogRead(A0); // average out noise
float raw = sum / 16.0;
float mm = (raw - rawMin) * STROKE_MM / (rawMax - rawMin);
Serial.print("Position "); Serial.print(mm, 1); Serial.println(" mm");
delay(100);
}Setup and tuning
connect the track ends to supply and ground, and the wiper to an analog input.
use a stable reference, often 5 or 10 V; read as a ratio to cancel supply changes.
use a divider for 10 V supplies into 3.3 V ADCs.
align the rod with the motion using ball joints.
wiper wear limits life; avoid vibration and high speed.
What you need
Shop this list20 of 20 found in our store · ₹1,08,820
MIRAN KTC1-130MM Short-Stroke Rod Type Linear Displacement Sensor – 0-130mm Stroke, 0-5V/10V/4-20mA/RS485 Output: the part this guide coversMIRAN KTC1-130MM Short-Stroke Rod Type Linear Displacement Sensor – 0-130mm Stroke, 0-5V/10V/4-20mA/RS485 Output₹5,099
MIRAN KTC1-150MM KTC Pull-Rod Type Linear Displacement Sensor – 0-150mm Stroke, 0-5V/0-10V/4-20mA/RS485 Output, Flange Mount: another version this guide coversMIRAN KTC1-150MM KTC Pull-Rod Type Linear Displacement Sensor – 0-150mm Stroke, 0-5V/0-10V/4-20mA/RS485 Output, Flange Mount₹5,359
MIRAN KTC1-300MM Pull-Rod Type Linear Displacement Sensor – 0-300mm Stroke, 0-5V/0-10V/4-20mA/RS485 Output: another version this guide coversMIRAN KTC1-300MM Pull-Rod Type Linear Displacement Sensor – 0-300mm Stroke, 0-5V/0-10V/4-20mA/RS485 Output₹7,289
MIRAN KTC1-500MM Pull-Rod Type Linear Displacement Sensor – Voltage/Current/RS485 Modbus Output: another version this guide coversMIRAN KTC1-500MM Pull-Rod Type Linear Displacement Sensor – Voltage/Current/RS485 Modbus Output₹14,009
MIRAN KTF1-130MM Slider Type Linear Displacement Sensor – 130mm Stroke, Potentiometer, 28V DC: another version this guide coversMIRAN KTF1-130MM Slider Type Linear Displacement Sensor – 130mm Stroke, Potentiometer, 28V DC₹5,329
MIRAN KTF1-550MM Slider Type Linear Displacement Sensor – Resistance Output, 550mm Stroke: another version this guide coversMIRAN KTF1-550MM Slider Type Linear Displacement Sensor – Resistance Output, 550mm Stroke₹10,459
MIRAN LS2-130MM Linear Displacement Sensor – 130mm Stroke, Flange Mount, Hirschmann Plug: another version this guide coversMIRAN LS2-130MM Linear Displacement Sensor – 130mm Stroke, Flange Mount, Hirschmann Plug₹3,719
MIRAN LS2-200MM Linear Displacement Sensor – 200mm Stroke, Flange Mount, Hirschmann Plug: another version this guide coversMIRAN LS2-200MM Linear Displacement Sensor – 200mm Stroke, Flange Mount, Hirschmann Plug₹4,359
MIRAN LS2-225MM Linear Displacement Sensor – 0-225mm Range, Flange Mount, 28VDC: another version this guide coversMIRAN LS2-225MM Linear Displacement Sensor – 0-225mm Range, Flange Mount, 28VDC₹4,409
MIRAN LS2-350MM Linear Displacement Sensor – 350mm Stroke, Flange Mount, Pull-Rod Potentiometer: another version this guide coversMIRAN LS2-350MM Linear Displacement Sensor – 350mm Stroke, Flange Mount, Pull-Rod Potentiometer₹5,359
MIRAN LS2-400MM Linear Displacement Sensor 0-400mm Range – Flange Mount, Rod-Pull Type: another version this guide coversMIRAN LS2-400MM Linear Displacement Sensor 0-400mm Range – Flange Mount, Rod-Pull Type₹5,879
MIRAN LS2-50MM Linear Displacement Sensor – 0-50mm Range, Flange Mount, Hirschmann Plug: another version this guide coversMIRAN LS2-50MM Linear Displacement Sensor – 0-50mm Range, Flange Mount, Hirschmann Plug₹2,739
MIRAN LS2-75MM Mini Linear Displacement Sensor – 0-24V DC Analog Output: another version this guide coversMIRAN LS2-75MM Mini Linear Displacement Sensor – 0-24V DC Analog Output₹3,139
SOP KPM-R-50mm Linear Displacement Sensor, 5KΩ Resistance, ≤28 VDC, Mini Articulated Rod Type: another version this guide coversSOP KPM-R-50mm Linear Displacement Sensor, 5KΩ Resistance, ≤28 VDC, Mini Articulated Rod Type₹2,669
SOP KPZ-R-25mm Linear Displacement Sensor, 5KΩ Resistance, ≤28VDC, Miniature Push-Rod Type: another version this guide coversSOP KPZ-R-25mm Linear Displacement Sensor, 5KΩ Resistance, ≤28VDC, Miniature Push-Rod Type₹2,989
SOP KTC-R-100 Linear Displacement Sensor, 100mm Stroke, 5KΩ Analog Output, Rod-Type Potentiometer: another version this guide coversSOP KTC-R-100 Linear Displacement Sensor, 100mm Stroke, 5KΩ Analog Output, Rod-Type Potentiometer₹3,289
SOP KTC-R-600mm Linear Displacement Sensor, 10KΩ Resistance, ≤28VDC, Rod-Type Flange Mount: another version this guide coversSOP KTC-R-600mm Linear Displacement Sensor, 10KΩ Resistance, ≤28VDC, Rod-Type Flange Mount₹4,779
SOP KTF-R-400mm Linear Displacement Sensor, 5KΩ Resistance, ≤28VDC – Flange Mount, Pulling Rod-Type: another version this guide coversSOP KTF-R-400mm Linear Displacement Sensor, 5KΩ Resistance, ≤28VDC – Flange Mount, Pulling Rod-Type₹4,419
SOP KTF-R-600 Linear Displacement Sensor, 600mm Stroke, 10KΩ Analog Output, Pulling Rod-Type Potentiometer, 24VDC, 1m Cable: another version this guide coversSOP KTF-R-600 Linear Displacement Sensor, 600mm Stroke, 10KΩ Analog Output, Pulling Rod-Type Potentiometer, 24VDC, 1m Cable₹6,219
SOP KTF-R-800 Linear Displacement Sensor, 800mm Stroke, 10KΩ Analog Output, Pulling Rod-Type, 24VDC, 1m Cable: another version this guide coversSOP KTF-R-800 Linear Displacement Sensor, 800mm Stroke, 10KΩ Analog Output, Pulling Rod-Type, 24VDC, 1m Cable₹7,309
Alternatives and when to choose them
- Linear position sensors: every type compared.
- Draw-wire and magnetostrictive sensors: longer strokes.
- SICK MPS cylinder sensors: inside pneumatic cylinders.
Common mistakes to avoid
- Side-loading the rod.
- Using 10 V output on a 3.3 V ADC.
- Ignoring wiper wear.
- Noisy reference supply.
Frequently asked questions
How does a potentiometric displacement sensor work?
A wiper slides along a resistive track, giving a voltage proportional to position.
Can I read it with Arduino?
Yes, with 5 V supply directly on an analog pin.
Why is the reading noisy?
A worn track, vibration or a noisy reference supply makes readings jump.
What stroke lengths are available?
Common stroke lengths run from about 25 mm up to 1000 mm.
Why must the rod be aligned?
Side loads bend the rod and wear the bearings, so the sensor fails early.
Parts for this guide
MIRAN KTC1-130MM Short-Stroke Rod Type Linear Displacement Sensor – 0-130mm Stroke, 0-5V/10V/4-20mA/RS485 Output₹5,099View
MIRAN KTC1-150MM KTC Pull-Rod Type Linear Displacement Sensor – 0-150mm Stroke, 0-5V/0-10V/4-20mA/RS485 Output, Flange Mount₹5,359View
MIRAN KTC1-300MM Pull-Rod Type Linear Displacement Sensor – 0-300mm Stroke, 0-5V/0-10V/4-20mA/RS485 Output₹7,289View- ₹14,009View
- ₹5,329View
- ₹10,459View
- ₹3,719View
- ₹4,359View
- ₹4,409View
- ₹5,359View
- ₹5,879View
- ₹2,739View
- ₹3,139View
- ₹2,669View
- ₹2,989View
- ₹3,289View
- ₹4,779View
- ₹4,419View
SOP KTF-R-600 Linear Displacement Sensor, 600mm Stroke, 10KΩ Analog Output, Pulling Rod-Type Potentiometer, 24VDC, 1m Cable₹6,219View
SOP KTF-R-800 Linear Displacement Sensor, 800mm Stroke, 10KΩ Analog Output, Pulling Rod-Type, 24VDC, 1m Cable₹7,309View
SOP KTR2-R-25 Linear Displacement Sensor, 25mm Stroke, 5KΩ, Spring Return, Analog Output, 24VDC, 1m Cable₹2,929View- ₹2,669View
- ₹48,819View
- ₹50,149View
- ₹44,869View
- ₹46,189View
- ₹41,459View
- ₹38,049View
- ₹38,649View
- ₹78,489View
- ₹359View
- ₹49View
- ₹68View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.












