Buying guide · Intermediate · 3 min read
STM32 Nucleo and Discovery Boards
Naming, Series and Getting Started
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
STM32 Nucleo boards are low-cost development boards with a built-in ST-LINK programmer and Arduino Uno-style headers. Discovery kits add on-board sensors, displays or audio. The name tells you the chip: F4 is a mid-range Cortex-M4, H7 is high performance, L4 and U5 save power. Program them with STM32CubeIDE, PlatformIO or the Arduino STM32 core.
Key specs at a glance
- Nucleo-32
- Arduino Nano footprint, 32-pin chips
- Nucleo-64
- Uno R3 headers plus ST morpho pins, 64-pin chips
- Nucleo-144
- Uno R3 headers plus morpho, 144-pin chips, Ethernet on many
- Debugger
- ST-LINK/V2-1 or V3 on board: programming, debug, virtual COM port
- Logic level
- 3.3 V on most boards (check pins marked 5 V tolerant)
- IDE
- STM32CubeIDE, PlatformIO, Keil, IAR, or STM32duino for Arduino
Reading an STM32 board name
A name such as NUCLEO-F446RE packs the whole specification into one string. Chip names follow the same pattern: STM32F446RET6.
| Part | Meaning | Example |
|---|---|---|
| Series letter | Product family | F = mainstream, L = low power, H = high performance, G = cost-optimised, U = ultra low power, WB/WL = wireless |
| Number after it | Core and feature line | F4 = Cortex-M4 with FPU, F7 and H7 = Cortex-M7, G0 = Cortex-M0+ |
| Pin count letter | Pins on the package | K = 32, C = 48, R = 64, V = 100, Z = 144, I = 176 |
| Flash letter | Flash size | 6 = 32 KB, 8 = 64 KB, B = 128 KB, C = 256 KB, E = 512 KB, G = 1 MB, I = 2 MB |
- Series letter
- Meaning:
- Product family
- Example:
- F = mainstream, L = low power, H = high performance, G = cost-optimised, U = ultra low power, WB/WL = wireless
- Number after it
- Meaning:
- Core and feature line
- Example:
- F4 = Cortex-M4 with FPU, F7 and H7 = Cortex-M7, G0 = Cortex-M0+
- Pin count letter
- Meaning:
- Pins on the package
- Example:
- K = 32, C = 48, R = 64, V = 100, Z = 144, I = 176
- Flash letter
- Meaning:
- Flash size
- Example:
- 6 = 32 KB, 8 = 64 KB, B = 128 KB, C = 256 KB, E = 512 KB, G = 1 MB, I = 2 MB
Nucleo boards
Nucleo boards are the best starting point. Each size has the same idea: one STM32 chip, an ST-LINK debugger on the same board and plug-in headers. Plug in the USB cable and the board appears as a USB drive: drag a compiled .bin file onto it and it programs itself. A virtual COM port also gives you a serial console.
Nucleo-64 boards have Uno R3-style headers, so many Arduino shields fit, with 3.3 V logic. The extra "morpho" headers expose every pin.
Discovery kits
Discovery kits are demonstration boards. They add an LCD or touchscreen, accelerometer, microphone, audio DAC or radio on top of the same debugger. Examples include the STM32F407 Discovery (Cortex-M4 at 168 MHz with audio and a MEMS accelerometer) and larger kits with colour LCDs for graphics. Choose one when you want to learn a specific peripheral, such as graphics or audio, without wiring a module.
Which series to pick
huge tutorial base. The F103 'Blue Pill' is the classic cheap board, covered in STM32 Blue Pill and Black Pill.
modern, inexpensive, with good analog and motor control features.
low power for battery projects.
very fast, for graphics, signal processing and machine learning.
Bluetooth Low Energy or LoRa on the chip.
Getting started
- 1Install STM32CubeIDE (free) or PlatformIO.
- 2Pick the exact Nucleo board in the project wizard.
- 3Use CubeMX inside the IDE to choose pins, clocks and peripherals; it generates the setup code.
- 4Build, then click Debug. The on-board ST-LINK flashes the chip.
- 5To use the Arduino IDE, install the STM32duino board package and pick the matching Nucleo target.
Common mistakes to avoid
- Treating all pins as 5 V tolerant.
- Buying a Discovery kit when a cheaper Nucleo would do.
- Plugging an Uno shield that uses 5 V logic into a Nucleo-64 without checking.
- Leaving the ST-LINK firmware outdated, which can stop new chips being detected.
- Forgetting to set the clock, so peripherals run at the wrong speed.
Frequently asked questions
Is STM32 harder than Arduino?
The hardware is more capable and the setup is more detailed. CubeMX and the STM32duino package make it manageable.
Do I need an external programmer?
No. Nucleo and Discovery boards include ST-LINK.
Can I use Arduino libraries?
Many work through the STM32duino core, though not all, because of hardware differences.
What is the difference between Nucleo and Discovery?
Nucleo is a minimal board with headers. Discovery adds peripherals such as an LCD, sensors or audio.
Which Nucleo is best for beginners?
A Nucleo-64 such as the F446RE or G474RE: plenty of tutorials and Uno-compatible headers.
Can I use the ST-LINK on another board?
Yes. Most Nucleo boards let you cut or jumper the debugger to program a separate STM32 target.
Parts for this guide
Terms in this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
- STMicroelectronics: STM32 Nucleo-64 user manual UM1724
- STMicroelectronics: STM32 product naming conventions
- STM32duino documentation
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




