Component guide · Advanced · 4 min read
SX1302 and SX1303 LoRaWAN Gateway Modules and Gateways

Raspberry Pi Setup
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A LoRaWAN gateway listens on eight channels at once and forwards every packet it hears to a network server over the internet. Concentrator modules such as the Seeed WM1302, Elecrow LR1302, RAK2287 and SX1303 mini PCIe cards add that radio to a Raspberry Pi through a HAT, while the Dragino LPS8N and SenseCAP M2 are ready-made gateways configured through a web page.
Key specs at a glance
- Chip
- Semtech SX1302 or SX1303 baseband with SX1250 radios
- Channels
- 8 LoRa channels plus 1 FSK, all spreading factors at once
- Form
- Mini PCIe card (SPI or USB) or complete gateway
- Host
- Raspberry Pi 3/4/5 with a Pi HAT, or built-in Linux
- Backhaul
- Ethernet, Wi-Fi or 4G depending on gateway
- GPS
- Optional, for time sync and Class B
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Seeed Studio WM1302 LoRaWAN Gateway Module (SPI) – EU868, SX1302₹4,379
Option 2Elecrow LR1302 LoRaWAN Gateway Module SPI EU868 SX1302₹3,979
Option 3EDATEC ED-GW1303S LoRaWAN Gateway Module (SX1303, 868MHz, Mini PCIe)₹9,080
Option 4EDATEC ED-GW1303S-915M LoRaWAN Gateway Module (SX1303, 915MHz, mini PCIe)₹10,402
Option 5Nebulae FCC-Certified Mini PCIe LoRa Concentrator Board (915MHz, SX1302)₹9,999
Option 6Nebulae NLN0821-I LoRa Concentrator Board w/ GPS & SX1303₹9,499
What the SX1302 and SX1303 LoRaWAN gateway module is
Nodes do not pair with a gateway; any gateway in range passes packets to the network server, which de-duplicates them and checks keys. That is why one gateway can serve thousands of sensors.
Concentrator cards must match the region: EU868 cards cover India's 865 to 867 MHz plan in most firmware, while 915 MHz cards do not. The SX1303 adds fine timestamps for geolocation. The ESP32 based Elecrow gateway module is a single-board option with an LCD.
SX1302 and SX1303 LoRaWAN gateway module pinout
The pins on the SX1302 and SX1303 LoRaWAN gateway module and what each one does.
| Pin | Function |
|---|---|
| Mini PCIe edge | SPI or USB, 3.3 V and reset to the HAT |
| Antenna | U.FL or SMA, 868 MHz |
| GPS antenna | Optional on GPS versions |
| Reset | GPIO 17 on most Pi HATs |
| Power | 3.3 V from the HAT (needs a good 5 V 3 A Pi supply) |
- Mini PCIe edge
- SPI or USB, 3.3 V and reset to the HAT
- Antenna
- U.FL or SMA, 868 MHz
- GPS antenna
- Optional on GPS versions
- Reset
- GPIO 17 on most Pi HATs
- Power
- 3.3 V from the HAT (needs a good 5 V 3 A Pi supply)
Wiring the SX1302 and SX1303 LoRaWAN gateway module
Fit the antenna before powering the card. Keep the gateway antenna high and outdoors with low-loss cable; most range problems are antenna problems.
| SX1302 and SX1303 LoRaWAN gateway module pin | Concentrator on Pi | Ready-made gateway |
|---|---|---|
| Concentrator card | Pi HAT mini PCIe slot | - |
| HAT | Raspberry Pi GPIO header | - |
| LoRa antenna | Card U.FL via pigtail | Outdoor antenna on a mast for range |
| Backhaul | Ethernet to router | Web setup page |
- Concentrator card
- Concentrator on Pi:
- Pi HAT mini PCIe slot
- Ready-made gateway:
- -
- HAT
- Concentrator on Pi:
- Raspberry Pi GPIO header
- Ready-made gateway:
- -
- LoRa antenna
- Concentrator on Pi:
- Card U.FL via pigtail
- Ready-made gateway:
- Outdoor antenna on a mast for range
- Backhaul
- Concentrator on Pi:
- Ethernet to router
- Ready-made gateway:
- Web setup page
Example code
Many makers ship their own image or install script (Seeed SenseCAP, RAK Pi image, ChirpStack Gateway OS) that does all of this. Register the gateway EUI on The Things Network with the matching frequency plan.
sudo raspi-config nonint do_spi 0 # enable SPI
sudo apt install -y git make gcc
git clone https://github.com/Lora-net/sx1302_hal.git
cd sx1302_hal && make
cd packet_forwarder
cp ../tools/reset_lgw.sh .
# edit global_conf.json.sx1250.EU868: set gateway_ID and
# "server_address": "eu1.cloud.thethings.network", ports 1700
./lora_pkt_fwd -c global_conf.json.sx1250.EU868Setup and tuning
use an India 865 to 867 MHz plan on the network server and in the forwarder config.
The Things Network for quick starts, or ChirpStack on the Pi for a private network.
LPS8N and SenseCAP M2 open a Wi-Fi setup page on first boot.
height beats power; a rooftop antenna can cover several kilometres.
What you need
Shop this list15 of 15 found in our store · ₹1,72,307
Seeed Studio Studio WM1302 LoRaWAN Gateway Module (SPI) – EU868, SX1302: the part this guide coversSeeed Studio WM1302 LoRaWAN Gateway Module (SPI) – EU868, SX1302₹4,379
Elecrow LR1302 LoRaWAN Gateway Module SPI EU868 SX1302: another version this guide coversElecrow LR1302 LoRaWAN Gateway Module SPI EU868 SX1302₹3,979
EDATEC ED-GW1303S LoRaWAN Gateway Module (SX1303, 868MHz, Mini PCIe): another version this guide coversEDATEC ED-GW1303S LoRaWAN Gateway Module (SX1303, 868MHz, Mini PCIe)₹9,080
EDATEC ED-GW1303S-915M LoRaWAN Gateway Module (SX1303, 915MHz, mini PCIe): another version this guide coversEDATEC ED-GW1303S-915M LoRaWAN Gateway Module (SX1303, 915MHz, mini PCIe)₹10,402
Nebulae FCC-Certified Mini PCIe LoRa Concentrator Board (915MHz, SX1302): another version this guide coversNebulae FCC-Certified Mini PCIe LoRa Concentrator Board (915MHz, SX1302)₹9,999
Nebulae NLN0821-I LoRa Concentrator Board w/ GPS & SX1303: another version this guide coversNebulae NLN0821-I LoRa Concentrator Board w/ GPS & SX1303₹9,499
RAKwireless WisLink LPWAN Concentrator RAK2287 USB w/ GPS IN865: another version this guide coversRAKwireless WisLink LPWAN Concentrator RAK2287 USB w/ GPS IN865₹16,349
Dragino LPS8N Multi-Channel Indoor LoRaWAN Gateway: another version this guide coversDragino LPS8N Multi-Channel Indoor LoRaWAN Gateway₹20,839
Seeed Studio Studio SenseCAP M2 Multi-Platform LoRaWAN Indoor Gateway (SX1302) EU868: another version this guide coversSeeed Studio SenseCAP M2 Multi-Platform LoRaWAN Indoor Gateway (SX1302) EU868₹13,649
SenseCAP Outdoor LoRaWAN Gateway (EU868): another version this guide coversSenseCAP Outdoor LoRaWAN Gateway (EU868)₹57,250
Elecrow ESP32 LoRaWAN Gateway Module w/ 1.8″ LCD & Ethernet – 868MHz: another version this guide coversElecrow ESP32 LoRaWAN Gateway Module w/ 1.8″ LCD & Ethernet – 868MHz₹3,680
Raspberry Pi 4 Model B 4GB: the host computer for a gatewayRaspberry Pi 4 Model B with 4GB RAM₹11,461Closest match, check the specs
868MHz 4dBi SMA antenna with 3 m cable: an outdoor antenna for 865 to 868 MHzLWC-868-MM-03 868MHz 4dBi SMA Antenna w/ 3m RG58 Cable₹412Closest match, check the specs
IPEX to SMA pigtail cable: to fit an SMA antenna to an IPEX socket5cm RG178 IPEX 1 to RP-SMA Female RF Pigtail Cable₹82Closest match, check the specs
Raspberry Pi 27W USB-C power supply: a stable supply for the Pi and concentratorRaspberry Pi 27W USB-C PD Power Supply – White (IN)₹1,247
Alternatives and when to choose them
- LoRaWAN nodes and gateways: how the whole network fits together.
- Heltec CubeCell: a node to test the gateway.
- RAK WisBlock: another LoRaWAN node system.
Common mistakes to avoid
- Buying a 915 MHz concentrator for India.
- Powering the concentrator without an antenna.
- Using a weak Pi supply, causing resets during transmit.
- Mismatched frequency plans between gateway and server.
Frequently asked questions
Can an ESP32 be a gateway?
Only a single-channel test gateway; it misses most packets on a real network.
How many nodes can one gateway serve?
Thousands of low-traffic sensors.
Do I need internet?
Yes for a cloud network server; ChirpStack on the Pi can run fully local.
SX1302 or SX1303?
Same performance; the SX1303 adds fine timestamping for geolocation.
What range can I expect?
Two to five kilometres in towns and more in open ground with a high antenna.
Parts for this guide
Keep learning
Sources
- Semtech SX1302 and SX1303 datasheets
- Lora-net sx1302_hal repository
- The Things Network gateway documentation
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

