Component guide · Intermediate · 4 min read
Tarot Folding Propellers, Clamp Holders and Quick-Release Prop Adapters

15 to 22 Inch High-Efficiency Props for Multirotors and Agriculture Drones
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Tarot folding propellers are carbon or nylon props for 15 to 22 inch multirotors and cargo drones. The blade folds when the motor stops, so the drone packs flat. Clamp holders and quick-release adapters let you swap props without tools. Match prop diameter to the motor and the clamp to the shaft diameter.
Key specs at a glance
- Prop sizes
- 15 to 22 inch
- Blades
- Folding, two-blade
- Hub fitting
- Clamp holder or quick-release adapter
- Materials
- Carbon fibre or reinforced nylon
- Shaft
- 4 mm on some adapters, M3 15 mm hole pattern on others
- Use
- Hexacopters, X8 and agricultural drones
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Tarot CCW Quick Release Prop Adapter 4mm Shaft 17-19₹239
Option 2Quick Release Prop Adapter for 15-22″ Props, M3 15mm Motor₹839
Option 3Tarot Folding Propeller Clamp Holder Black TL100B15₹419
Option 4Tarot TL100B16 Red Folding Prop Clamp Holder 16-19 Inch₹449
Option 5Tarot TL100D13 2170 Efficient Folding Blade Pair (CW+CCW)₹1,780
Option 6Quick Release Prop Adapter CW & CCW Set for 15-22 Inch Prop / M3 15mm Hole Motor₹889
What the Tarot folding propellers, clamps and quick-release adapters is
Large multirotors use big, slow props for efficiency, and carbon folding props keep the frame compact for transport. Tarot's TL100 series clamps hold the prop to the motor, and the quick-release adapters let you thread the prop on by hand and lock it with a spring or collar so it cannot loosen under power.
Folding props open by centrifugal force and fold back when the motor stops. They must always spin the right way: CW and CCW props are different and the adapter threading matches the spin direction.
Tarot folding propellers, clamps and quick-release adapters pinout
The pins on the Tarot folding propellers, clamps and quick-release adapters and what each one does.
| Pin | Function |
|---|---|
| Prop size | 15, 16, 17, 18, 19, 22 inch examples |
| Clamp holder | TL100B15 and TL100B16 for specific prop widths |
| Quick-release | CW and CCW adapters; self-locking |
| Motor fit | M3 15 mm hole pattern or 4 mm shaft by model |
| Direction | Marked CW or CCW on blade and adapter |
- Prop size
- 15, 16, 17, 18, 19, 22 inch examples
- Clamp holder
- TL100B15 and TL100B16 for specific prop widths
- Quick-release
- CW and CCW adapters; self-locking
- Motor fit
- M3 15 mm hole pattern or 4 mm shaft by model
- Direction
- Marked CW or CCW on blade and adapter
Wiring the Tarot folding propellers, clamps and quick-release adapters
Props and adapters are fitted by direction, not wired; always lock the adapter against the spin so it tightens in flight.
| Tarot folding propellers, clamps and quick-release adapters pin | Fit on | Note |
|---|---|---|
| Arm 1 | CCW adapter and CCW prop | Threading must tighten with spin |
| Arm 2 | CW adapter and CW prop | Opposite thread |
| Arm 3 | CCW adapter and CCW prop | Match to the flight map |
| Arm 4 | CW adapter and CW prop | Test on the ground |
- Arm 1
- Fit on:
- CCW adapter and CCW prop
- Note:
- Threading must tighten with spin
- Arm 2
- Fit on:
- CW adapter and CW prop
- Note:
- Opposite thread
- Arm 3
- Fit on:
- CCW adapter and CCW prop
- Note:
- Match to the flight map
- Arm 4
- Fit on:
- CW adapter and CW prop
- Note:
- Test on the ground
Example code
Large props are dangerous at speed. Use a strong restraint for the first spin-up and keep a safe distance.
1. Battery disconnected. Fit the adapter so it tightens as the motor spins.
2. Fit the prop; check the blades unfold fully and lock.
3. Tug each prop lightly: no wobble, no play on the shaft.
4. Check the clamp holder model matches your prop size.
5. Keep hands and body well clear and test with a restraint on the ground.
6. Inspect after every hard landing or tree strike.Setup and tuning
the TL100B15 and TL100B16 clamp holders are listed for different prop sizes; read the title and match it to your prop.
adapter thread and prop must tighten as the motor spins.
big props must be balanced; vibration destroys bearings.
use a restraint and a safe distance for tests; never test by hand.
What you need
Shop this list12 of 12 found in our store · ₹14,807
Tarot CCW Quick Release Prop Adapter 4mm Shaft 17-19: a quick-release adapter for 17 to 19 inch propsTarot CCW Quick Release Prop Adapter 4mm Shaft 17-19₹239
Quick Release Prop Adapter for 15-22″ Props, M3 15mm Motor: another version this guide coversQuick Release Prop Adapter for 15-22″ Props, M3 15mm Motor₹839
Tarot Folding Propeller Clamp Holder Black TL100B15: another version this guide coversTarot Folding Propeller Clamp Holder Black TL100B15₹419
Tarot TL100B16 Red Folding Prop Clamp Holder 16-19 Inch: another version this guide coversTarot TL100B16 Red Folding Prop Clamp Holder 16-19 Inch₹449
Tarot TL100D13 2170 Efficient Folding Blade Pair (CW+CCW): another version this guide coversTarot TL100D13 2170 Efficient Folding Blade Pair (CW+CCW)₹1,780
Generic Quick Release Prop Adapter CW & CCW Set for 15-22 Inch Prop / M3 15mm Hole Motor: another version this guide coversQuick Release Prop Adapter CW & CCW Set for 15-22 Inch Prop / M3 15mm Hole Motor₹889
Tarot TL100D22 1865CW 18-Inch High-Efficiency Folding CW Propeller: another version this guide coversTarot TL100D22 1865CW 18-Inch High-Efficiency Folding CW Propeller₹449
Tarot 1865CCW TL100D23 18-Inch High-Efficiency Folding CCW Propeller: another version this guide coversTarot 1865CCW TL100D23 18-Inch High-Efficiency Folding CCW Propeller₹449
Tarot TL3030 Martin 16×5.5 Folding Carbon Fiber Propeller CW+CCW – 4-Pack: another version this guide coversTarot TL3030 Martin 16×5.5 Folding Carbon Fiber Propeller CW+CCW – 4-Pack₹5,679
Tarot 1760 17 Inch High Efficiency Folding Propeller with Bracket (CW/CCW) TL100D10: another version this guide coversTarot 1760 17 Inch High Efficiency Folding Propeller with Bracket (CW/CCW) TL100D10₹2,059
Tarot TL100D04 1555 Efficient Folding Propeller Pair (CW+CCW): another version this guide coversTarot TL100D04 1555 Efficient Folding Propeller Pair (CW+CCW)₹1,319
Tarot CCW Quick release props adapter/Self-locking props: another version this guide coversTarot CCW Quick release props adapter/Self-locking props₹237
Alternatives and when to choose them
- Drone propellers guide: size and pitch basics.
- Heavy-lift drone motors: motors that suit these props.
- HQProp thin electric and multirotor props: fixed props for smaller builds.
Common mistakes to avoid
- Fitting an adapter that loosens with spin direction.
- Skipping balancing on a 17 inch or larger prop.
- Fitting the wrong clamp holder model for the prop.
- Testing a large prop without a restraint.
Frequently asked questions
What are folding props for?
They fold flat when stopped, so the drone packs small for transport.
Do CW and CCW adapters differ?
Yes, each adapter's thread tightens in one spin direction only.
What size do these cover?
15 to 22 inch props, depending on the model.
Do I need a clamp holder?
Clamp holders hold folding props on the motor, and quick-release adapters let you swap props without tools.
Are they safe to hand-test?
No, large props must be tested restrained and from a safe distance.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
