Component guide · Advanced · 5 min read
Teltonika TRB Gateways, DAP142, NTP001 and Switches

TRB140 to TRB501, TSW010 to TSW110, SWM280 to SWM282, Lantronix E214, Waveshare DIN-Rail Switch and PoE Splitter
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
TRB gateways are small DIN-rail units that give one device an LTE connection: TRB140 and TRB160 for Ethernet devices, TRB141 for I/O, TRB142 for RS232, TRB143 for M-Bus meters, TRB245 for I/O with RS485, TRB255 and TRB256 for NB-IoT and Cat-M1, and TRB501 for 5G. TSW and SWM switches add Ethernet ports, many with PoE+, on a DIN rail.
Key specs at a glance
- TRB gateways
- One LAN port, LTE or 5G, serial or I/O depending on model
- Low power LTE
- TRB255/256: Cat-M1 and NB-IoT with GNSS
- DAP142
- Wi-Fi access point with RS232
- NTP001
- GNSS-disciplined Stratum-1 time server with RS485
- Switches
- TSW: 5 to 8 ports, PoE+ on TSW040, 100, 101; SWM: managed 24-port
- Power
- 9-30V DC typical, 48-57V for PoE switches
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Teltonika TRB140 Industrial Ethernet Gateway w/ 4G LTE Cat 4 & Gigabit ETH₹16,039
Option 2Teltonika TRB141 Industrial LTE Cat-1 Gateway₹16,039
Option 3Teltonika TRB142 Industrial RS232 LTE Gateway₹14,509
Option 4Teltonika TRB143 Industrial M-Bus Cellular Gateway w/ 4G LTE Cat 4₹22,919
Option 5Teltonika TRB160 Industrial LTE Cat 6 Gateway₹21,079
Option 6Teltonika TRB245 Industrial LTE Gateway with I/O₹21,849
What the Teltonika TRB gateways, access points, NTP server and industrial Ethernet switches is
Teltonika gateways and industrial switches, such as the TRB series and TSW switches, connect sensors and machines to networks and the cloud with 4G, Ethernet, RS485 and PoE.
Use a TRB gateway when one PLC, meter or controller needs remote access and a full router is too much. TRB143 reads wired M-Bus water and heat meters directly.
For switches, unmanaged TSW models are plug-and-play; SWM switches add VLANs, monitoring and RMS management. PoE+ switches need a 48-57V supply sized for all powered devices. The Waveshare PoE splitter takes PoE and gives 5V on USB-C to power a Raspberry Pi or ESP32 board.
Teltonika TRB gateways, access points, NTP server and industrial Ethernet switches pinout
The pins on the Teltonika TRB gateways, access points, NTP server and industrial Ethernet switches and what each one does.
| Pin | Function |
|---|---|
| SIM slots | One or two mini/nano SIM, eSIM on some |
| Ethernet | WAN and LAN ports, Gigabit on RUTX and RUTM |
| Power | 9-30V or 9-50V DC terminal or barrel, PoE-in on some |
| Serial | RS232 and/or RS485 on RUT206, RUT906, RUT956, TRB14x |
| Antennas | LTE/5G main and diversity, Wi-Fi, GNSS |
- SIM slots
- One or two mini/nano SIM, eSIM on some
- Ethernet
- WAN and LAN ports, Gigabit on RUTX and RUTM
- Power
- 9-30V or 9-50V DC terminal or barrel, PoE-in on some
- Serial
- RS232 and/or RS485 on RUT206, RUT906, RUT956, TRB14x
- Antennas
- LTE/5G main and diversity, Wi-Fi, GNSS
Wiring the Teltonika TRB gateways, access points, NTP server and industrial Ethernet switches
Size the PoE supply for every powered device plus margin. Keep 230V wiring separate from low-voltage cables in the panel.
| Teltonika TRB gateways, access points, NTP server and industrial Ethernet switches pin | Connection | Note |
|---|---|---|
| Power | 12 or 24V DC supply | Within the router's range |
| LTE antennas | MAIN and AUX SMA | Both fitted for full speed |
| RS485 | D+ and D- to the bus | Same baud and parity as the meters |
- Power
- Connection:
- 12 or 24V DC supply
- Note:
- Within the router's range
- LTE antennas
- Connection:
- MAIN and AUX SMA
- Note:
- Both fitted for full speed
- RS485
- Connection:
- D+ and D- to the bus
- Note:
- Same baud and parity as the meters
Example code
TRB gateways run RutOS with the same Modbus and Data to Server menus as RUT routers.
1. Services > Modbus > Modbus Serial Master: add the RS485 port, set 9600 8N1 (match the meter).
2. Add a slave device: ID 1, add requests for the meter registers (for example voltage and power).
3. Click Test to check readings arrive.
4. Services > Data to Server: new instance, type MQTT, broker address and topic.
5. Data source: Modbus, choose the requests above, period 60 s.
6. Watch the topic on the broker (for example with mosquitto_sub) to confirm data.Setup and tuning
set APN, Modbus or MQTT settings in the web UI.
plan VLANs and PoE budget for cameras and access points.
use DIN-rail supplies with surge protection.
change passwords and use RMS or VPN.
terminate RS485 lines.
What you need
Shop this list20 of 20 found in our store · ₹3,86,163
Teltonika TRB140 Industrial Ethernet Gateway w/ 4G LTE Cat 4 & Gigabit ETH: the part this guide coversTeltonika TRB140 Industrial Ethernet Gateway w/ 4G LTE Cat 4 & Gigabit ETH₹16,039
Teltonika TRB141 Industrial LTE Cat-1 Gateway: another version this guide coversTeltonika TRB141 Industrial LTE Cat-1 Gateway₹16,039
Teltonika TRB142 Industrial RS232 LTE Gateway: another version this guide coversTeltonika TRB142 Industrial RS232 LTE Gateway₹14,509
Teltonika TRB143 Industrial M-Bus Cellular Gateway w/ 4G LTE Cat 4: another version this guide coversTeltonika TRB143 Industrial M-Bus Cellular Gateway w/ 4G LTE Cat 4₹22,919
Teltonika TRB160 Industrial LTE Cat 6 Gateway: another version this guide coversTeltonika TRB160 Industrial LTE Cat 6 Gateway₹21,079
Teltonika TRB245 Industrial LTE Gateway with I/O: another version this guide coversTeltonika TRB245 Industrial LTE Gateway with I/O₹21,849
Teltonika TRB255 Industrial LTE Cat M1/NB-IoT Gateway w/ GNSS: another version this guide coversTeltonika TRB255 Industrial LTE Cat M1/NB-IoT Gateway w/ GNSS₹18,329
Teltonika TRB256 Industrial LTE Cat-M1 NB-IoT Gateway: another version this guide coversTeltonika TRB256 Industrial LTE Cat-M1 NB-IoT Gateway₹15,579
Teltonika TRB501 Industrial 5G Gateway w/ 2.5GbE, Modbus: another version this guide coversTeltonika TRB501 Industrial 5G Gateway w/ 2.5GbE, Modbus₹51,179
Teltonika DAP142 AP+RS232 Industrial Wireless Access Point: another version this guide coversTeltonika DAP142 AP+RS232 Industrial Wireless Access Point₹9,929
Teltonika NTP001 Stratum-1 NTP Server w/ Multi-GNSS & RS485: another version this guide coversTeltonika NTP001 Stratum-1 NTP Server w/ Multi-GNSS & RS485₹16,809
Lantronix E214 LTE Cat 1 Industrial IoT Router with Edge Compute: another version this guide coversLantronix E214 LTE Cat 1 Industrial IoT Router with Edge Compute₹42,619
Teltonika TSW010 DIN Rail Ethernet Switch 5×100 Mbps: another version this guide coversTeltonika TSW010 DIN Rail Ethernet Switch 5×100 Mbps₹3,299
Teltonika TSW030 8-Port Industrial Ethernet Switch 8×100 Mbps: another version this guide coversTeltonika TSW030 8-Port Industrial Ethernet Switch 8×100 Mbps₹6,109
Teltonika TSW040 8-Port Industrial PoE+ Switch: another version this guide coversTeltonika TSW040 8-Port Industrial PoE+ Switch₹6,765
Teltonika TSW100 Industrial 5-Port Gigabit PoE+ Ethernet Switch: another version this guide coversTeltonika TSW100 Industrial 5-Port Gigabit PoE+ Ethernet Switch₹10,028
Teltonika TSW101 Industrial 5-Port Gigabit PoE+ Switch: another version this guide coversTeltonika TSW101 Industrial 5-Port Gigabit PoE+ Switch₹10,079
Teltonika Industrial Ethernet Switch: another version this guide coversTeltonika Industrial Ethernet Switch₹10,447
Teltonika SWM280 Managed Industrial Ethernet Switch 24-Port PoE+: another version this guide coversTeltonika SWM280 Managed Industrial Ethernet Switch 24-Port PoE+₹44,299
Teltonika SWM281 Managed Industrial Ethernet Switch 24x Gigabit RJ45 4x SFP: another version this guide coversTeltonika SWM281 Managed Industrial Ethernet Switch 24x Gigabit RJ45 4x SFP₹28,259
Alternatives and when to choose them
- Teltonika routers: full routers with Wi-Fi.
- Serial device servers: RS485 to Ethernet.
- Raspberry Pi PoE HATs: PoE for Pi.
Common mistakes to avoid
- No password change.
- Exceeding PoE budget.
- No RS485 termination.
- Exposing devices to the internet.
Frequently asked questions
What does a Teltonika gateway do?
It connects serial and Ethernet devices to the cloud over 4G.
Can it read Modbus devices and send MQTT?
Yes. The Modbus client and data sender can publish readings over MQTT.
How much PoE power do TSW switches give?
It depends on the model; check its total PoE budget before adding cameras.
Why do Modbus reads fail?
The slave address, baud rate or A/B wiring is wrong.
Can I manage devices remotely?
Yes. Teltonika RMS manages and updates devices remotely.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




