Buying guide · Intermediate · 3 min read
Thermal Cameras
FLIR Lepton Modules, Handheld Imagers and Phone Cameras
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A thermal camera shows heat as an image. Small modules such as the FLIR Lepton connect to a microcontroller or Raspberry Pi, while handheld and USB-C phone imagers work as ready tools for inspection. Higher resolution and a radiometric mode (a temperature for every pixel) cost more. Surface emissivity and distance affect accuracy, so confirm important readings with contact measurements.
Key specs at a glance
- Modules
- FLIR Lepton breakout boards, OpenMV adapter
- Handhelds
- HIKMICRO, Bosch, Fluke imagers with a screen
- Phone imagers
- USB-C cameras for Android
- Drone thermal
- Payloads up to 640x512 for FPV and mapping
- Resolution
- 80x60 to 640x512 pixels
- Output
- SPI/I2C on modules; USB or HDMI on cameras
Choose the right kind
Match the camera to the job.
| Kind | Strengths | Limits |
|---|---|---|
| FLIR Lepton module | Small and programmable, with Arduino, Raspberry Pi and OpenMV support | Low resolution (80x60 to 160x120) |
| Handheld thermal imager | Built-in screen and battery, reports temperatures | Higher cost |
| USB-C phone camera | Cheap, uses your phone screen | Android only on many models; resolution varies |
| Drone thermal payload | Search, inspection and agriculture | Needs a compatible gimbal and link |
| MLX90640 / AMG8833 array | Cheap sensor for DIY | Very low resolution; see temperature sensors |
- FLIR Lepton module
- Strengths:
- Small and programmable, with Arduino, Raspberry Pi and OpenMV support
- Limits:
- Low resolution (80x60 to 160x120)
- Handheld thermal imager
- Strengths:
- Built-in screen and battery, reports temperatures
- Limits:
- Higher cost
- USB-C phone camera
- Strengths:
- Cheap, uses your phone screen
- Limits:
- Android only on many models; resolution varies
- Drone thermal payload
- Strengths:
- Search, inspection and agriculture
- Limits:
- Needs a compatible gimbal and link
- MLX90640 / AMG8833 array
- Strengths:
- Cheap sensor for DIY
- Limits:
- Very low resolution; see temperature sensors
Radiometric or not
A radiometric camera stores a temperature for every pixel, so you can measure and log values. A non-radiometric camera only shows relative contrast, which is fine for finding hot spots or people but not for readings. Check the datasheet; modules such as the Lepton come in both versions.
Getting accurate readings
- Set the emissivity: bare metal reads colder than it is; matte tape or paint gives a better reading.
- Stay close enough that the target fills several pixels.
- Avoid reflections from windows and shiny surfaces.
- Allow the camera to warm up and recalibrate.
- Compare against a contact thermometer for critical jobs.
Using a Lepton module
- 1Mount the Lepton on its breakout board.
- 2Connect SPI (video) and I2C (control) to a Raspberry Pi or to an OpenMV camera through the adapter.
- 3Use a library to read frames and map values to colours.
- 4Add a lens cap or window for dusty places.
- 5Combine with a visible camera for context; see camera modules and edge AI boards.
Typical uses
Finding overheating electronics and loose connections, checking insulation, spotting leaks, wildlife and search work on drones, and monitoring 3D printer or battery pack temperatures. Use the temperature converter when comparing results.
Try it: Temperature converter calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Using a non-radiometric camera for temperature readings.
- Ignoring emissivity on shiny metal.
- Shooting through glass, which blocks infrared.
- Expecting the resolution of a visible camera.
- Never recalibrating or letting the camera warm up.
Frequently asked questions
Can a thermal camera see through walls?
No. It shows surface temperature, though warm patterns can hint at what is behind.
Which resolution do I need?
80x60 is fine for hot-spot finding; inspection work benefits from 256x192 or more.
What is emissivity?
How well a surface radiates heat; low values read too cold.
Is a phone thermal camera good enough?
For quick household checks, yes.
Can I use one on a drone?
Yes, with a compatible payload, gimbal and video link.
Parts for this guide
Calculators
Terms in this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.






