Component guide · Intermediate · 3 min read
TMP102, TMP112, TMP101, TMP103 and TMP119 Precision I2C Temperature Sensors

By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These TI-style I2C temperature sensors come in very small packages for wearables and boards. The TMP102 and TMP112 give 12-bit readings with 0.5 degrees C accuracy, the TMP101 adds a programmable alert and the TMP103 is a 4-ball micro sensor. The TMP119 (Adafruit board) is the top of the range: plus or minus 0.03 degrees C, good enough to replace a lab thermometer.
Key specs at a glance
- Supply
- 1.4 to 3.6 V (TMP102, TMP112), 1.7 to 5.5 V (TMP119)
- Interface
- I2C, 0x48 to 0x4B
- Accuracy
- 0.5 degrees C (TMP102, TMP112), 1 degree C (TMP103), 0.03 degrees C (TMP119)
- Resolution
- 0.0625 degrees C (12-bit), 0.0078 degrees C (TMP119)
- Current
- About 10 microamps or less
- Package
- SOT-563, SOT-23-6, DSBGA, WSON
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Adafruit TMP119 High-Precision ±0.03°C I2C Temperature Sensor – STEMMA QT / Qwiic₹2,377
Option 2UMW TMP102AIDRLR SOT-563 Digital Temperature Sensor IC₹72
Option 3UMW TMP112AIDRLR SOT-563 Digital Temperature Sensor IC₹30
Option 4UMW TMP112BIDRLR Digital Temperature Sensor IC – SOT-563 Package₹20
Option 5UMW TMP101NA SOT-23-6 Digital Temperature Sensor IC₹41
Option 6UMW TMP103AYFFR DSBGA-4 Digital Temperature Sensor IC₹19
What the TMP102, TMP112 and TMP119 sensors is
The TI TMP102, TMP117 and TMP119 are I2C digital temperature sensors; the TMP117 and TMP119 reach ±0.1 °C accuracy, which is close to medical thermometer grade.
The TMP102 and TMP112 are 3.6 V maximum parts: do not connect them to 5 V without a regulator and level shifter. The TMP119 board is fine on 3.3 or 5 V.
GXCAS GX112 parts are drop-in TMP112 alternatives with the same register map.
TMP102, TMP112 and TMP119 sensors pinout
The pins on the TMP102, TMP112 and TMP119 sensors and what each one does.
| Pin | Function |
|---|---|
| V+ | Supply |
| GND | Ground |
| SDA, SCL | I2C |
| ADD0 | Address select |
| ALERT | Open drain alert |
- V+
- Supply
- GND
- Ground
- SDA, SCL
- I2C
- ADD0
- Address select
- ALERT
- Open drain alert
Wiring the TMP102, TMP112 and TMP119 sensors
The Adafruit TMP119 has a STEMMA QT connector and level shifting on board.
| TMP102, TMP112 and TMP119 sensors pin | Arduino Uno | ESP32 |
|---|---|---|
| V+ | 3.3 V | 3.3 V |
| GND | GND | GND |
| SDA / SCL | A4 / A5 through a level shifter | GPIO 21 / 22 |
| ADD0 | GND for 0x48 | GND for 0x48 |
- V+
- Arduino Uno:
- 3.3 V
- ESP32:
- 3.3 V
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- SDA / SCL
- Arduino Uno:
- A4 / A5 through a level shifter
- ESP32:
- GPIO 21 / 22
- ADD0
- Arduino Uno:
- GND for 0x48
- ESP32:
- GND for 0x48
Example code
A minimal sketch to check the part works.
#include <Wire.h>
const uint8_t ADDR = 0x48;
const bool TMP119 = false; // true for the TMP119 board
void setup() { Serial.begin(115200); Wire.begin(); }
void loop() {
Wire.beginTransmission(ADDR); Wire.write(0x00); Wire.endTransmission();
Wire.requestFrom(ADDR, (uint8_t)2);
int16_t raw = (Wire.read() << 8) | Wire.read();
float t = TMP119 ? raw * 0.0078125 : (raw >> 4) * 0.0625;
Serial.print(t, 3); Serial.println(" C");
delay(1000);
}Setup and tuning
VCC 1.8 to 5.5 V (TMP117), GND, SDA and SCL with pull-ups.
use SparkFun TMP102 or TMP117 libraries.
set ADD0 for up to four addresses.
keep the sensor thermally isolated from hot board parts.
set averaging for lower noise in TMP117.
What you need
Shop this list11 of 12 found in our store · ₹3,175
Adafruit TMP119 High-Precision ±0.03°C I2C Temperature Sensor – STEMMA QT / Qwiic: the part this guide coversAdafruit TMP119 High-Precision ±0.03°C I2C Temperature Sensor – STEMMA QT / Qwiic₹2,377
UMW TMP102AIDRLR SOT-563 Digital Temperature Sensor IC: another version this guide coversUMW TMP102AIDRLR SOT-563 Digital Temperature Sensor IC₹72
UMW TMP112AIDRLR SOT-563 Digital Temperature Sensor IC: another version this guide coversUMW TMP112AIDRLR SOT-563 Digital Temperature Sensor IC₹30
UMW TMP112BIDRLR Digital Temperature Sensor IC – SOT-563 Package: another version this guide coversUMW TMP112BIDRLR Digital Temperature Sensor IC – SOT-563 Package₹20
UMW TMP101NA SOT-23-6 Digital Temperature Sensor IC: another version this guide coversUMW TMP101NA SOT-23-6 Digital Temperature Sensor IC₹41
UMW TMP103AYFFR DSBGA-4 Digital Temperature Sensor IC: another version this guide coversUMW TMP103AYFFR DSBGA-4 Digital Temperature Sensor IC₹19
GXCAS GX112D DFN-6 (1.6×1.6) Temperature Sensor IC: another version this guide coversGXCAS GX112D DFN-6 (1.6×1.6) Temperature Sensor IC₹37
GXCAS GX112XA -40℃~+125℃ Temperature Sensor IC WLCSP-4 Package: another version this guide coversGXCAS GX112XA -40℃~+125℃ Temperature Sensor IC WLCSP-4 Package₹31
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389- Uno R3 development board: the controller used in the wiring tableFind this part
4-channel logic level converter (BSS138): to connect 5 V and 3.3 V signals safely4-Channel Logic Level Converter (BSS138)₹20
0.96 inch OLED display 128x64: to show readings without a computer0.96" OLED Display 128x64₹139Closest match, check the specs
Alternatives and when to choose them
- LM75 family: larger, 5 V, cheaper.
- MCP9808 and STS35: 0.1 to 0.25 degree class.
- DS18B20: probe-based.
Common mistakes to avoid
- Mounting near hot components.
- Address conflicts.
- No pull-ups.
- Expecting ±0.1 °C from the TMP102.
Frequently asked questions
How accurate is the TMP117?
About ±0.1 °C from -20 to 50 °C, among the best digital sensors.
What is the TMP102 good for?
General temperature at ±0.5 °C, with very low power.
How many TMP117 can share a bus?
Up to four sensors can share one bus, using the ADD0 pin to set addresses.
Why does my TMP117 read higher than room temperature?
Board heat reaches it; isolate it from hot parts.
Can I use it with ESP32?
Yes. Wire it to the ESP32's I2C pins and power it from 3.3 V.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

