Component guide · Intermediate · 3 min read
3D Depth Sensors

Sipeed MaixSense A010, DFRobot CS20, Benewake CE30, Cube Eye S100D, Orbbec Astra Mini S Pro, Gemini 215 and YDLIDAR HP60C
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Depth cameras give a distance for every pixel, so a robot can see shapes, steps and people in 3D. ToF cameras such as the Sipeed MaixSense A010 (100 x 100), DFRobot CS20 and Cube Eye S100D time light pulses. The Benewake CE30 is a solid-state ToF LiDAR for obstacle avoidance. Orbbec Astra and YDLIDAR HP60C use structured light, and the Orbbec Gemini 215 uses stereo for short-range work.
Key specs at a glance
- Resolution
- 100 x 100 (A010) to VGA 640 x 480 (Cube Eye, Orbbec)
- Range
- About 0.2 to 5 m (indoor ToF), 0.4 to 30 m (CE30)
- Interface
- USB (most), UART (A010), Ethernet UDP (CE30)
- Principle
- ToF, structured light or active stereo
- Frame rate
- About 15 to 30 fps
- Software
- Maker SDKs, ROS / ROS 2 drivers, OpenNI (Orbbec)
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Sipeed MaixSense A010 with LCD – 3D ToF Depth Sensor Module w/ USB-C & UART₹4,729
Option 2DFRobot CS20 Dual-Resolution 3D ToF LiDAR Sensor (5V, 5 m Range, USB Type-C)₹21,199
Option 3Benewake CE30-D Solid-State ToF 3D LiDAR Sensor – 60°x4° FOV, 0.4-30m Range, UDP₹97,313
Option 4Benewake CE30-C 3D LiDAR Wide FOV Point Cloud Version – Solid-State ToF Sensor₹74,900
Option 5Cube Eye ToF 3D Depth Camera₹21,000
Option 6Orbbec Astra Mini S Pro 3D Depth Camera (Bare Module)₹21,750
What the ToF and structured-light 3D depth cameras is
ToF 3D depth cameras, such as the Arducam ToF camera, PMD and Orbbec Femto, measure depth for every pixel by timing reflected infrared light, for robots, gesture and volume measurement.
Structured-light and ToF cameras struggle in direct sunlight; stereo cameras cope better outdoors.
The MaixSense A010 has its own screen and UART output, so it can feed a microcontroller with a down-sampled depth map.
ToF and structured-light 3D depth cameras pinout
The pins on the ToF and structured-light 3D depth cameras and what each one does.
| Pin | Function |
|---|---|
| USB | Power and data (most) |
| UART | A010 serial output |
| Ethernet | CE30 |
- USB
- Power and data (most)
- UART
- A010 serial output
- Ethernet
- CE30
Wiring the ToF and structured-light 3D depth cameras
Connect the ToF and structured-light 3D depth cameras like this.
| ToF and structured-light 3D depth cameras pin | Raspberry Pi | Jetson |
|---|---|---|
| Camera | Raspberry Pi 5 USB 3 | Jetson USB 3 |
| Driver | Maker SDK / ROS 2 | Maker SDK / ROS 2 |
| Output | Depth image and point cloud | Same |
- Camera
- Raspberry Pi:
- Raspberry Pi 5 USB 3
- Jetson:
- Jetson USB 3
- Driver
- Raspberry Pi:
- Maker SDK / ROS 2
- Jetson:
- Maker SDK / ROS 2
- Output
- Raspberry Pi:
- Depth image and point cloud
- Jetson:
- Same
Example code
A minimal sketch to check the part works.
from pyorbbecsdk import Pipeline, Config, OBSensorType
pipe = Pipeline()
cfg = Config()
profile = pipe.get_stream_profile_list(OBSensorType.DEPTH_SENSOR).get_default_video_stream_profile()
cfg.enable_stream(profile)
pipe.start(cfg)
for _ in range(30):
frames = pipe.wait_for_frames(100)
if frames and frames.get_depth_frame():
d = frames.get_depth_frame()
print(d.get_width(), "x", d.get_height(), "depth frame")
pipe.stop()Setup and tuning
use the CSI or USB connection the camera supports, with its SDK.
check minimum and maximum range; most work from 0.2 to 4 m indoors.
strong sunlight reduces quality; most are indoor cameras.
black and shiny surfaces return less light.
separate or sync them to avoid interference.
What you need
Shop this list10 of 10 found in our store · ₹3,79,112
Sipeed MaixSense A010 with LCD – 3D ToF Depth Sensor Module w/ USB-C & UART: the part this guide coversSipeed MaixSense A010 with LCD – 3D ToF Depth Sensor Module w/ USB-C & UART₹4,729
DFRobot CS20 Dual-Resolution 3D ToF LiDAR Sensor (5V, 5 m Range, USB Type-C): another version this guide coversDFRobot CS20 Dual-Resolution 3D ToF LiDAR Sensor (5V, 5 m Range, USB Type-C)₹21,199
Benewake CE30-D Solid-State ToF 3D LiDAR Sensor – 60°x4° FOV, 0.4-30m Range, UDP: another version this guide coversBenewake CE30-D Solid-State ToF 3D LiDAR Sensor – 60°x4° FOV, 0.4-30m Range, UDP₹97,313
Benewake CE30-C 3D LiDAR Wide FOV Point Cloud Version – Solid-State ToF Sensor: another version this guide coversBenewake CE30-C 3D LiDAR Wide FOV Point Cloud Version – Solid-State ToF Sensor₹74,900
Cube Eye ToF 3D Depth Camera: another version this guide coversCube Eye ToF 3D Depth Camera₹21,000
Orbbec Astra Mini S Pro 3D Depth Camera (Bare Module): another version this guide coversOrbbec Astra Mini S Pro 3D Depth Camera (Bare Module)₹21,750
Orbbec Gemini 215 Short-Range Stereo Depth Camera: another version this guide coversOrbbec Gemini 215 Short-Range Stereo Depth Camera₹29,750
YDLIDAR HP60C RGBD Depth Camera – Structured Light 3D Imaging, USB Type-C: another version this guide coversYDLIDAR HP60C RGBD Depth Camera – Structured Light 3D Imaging, USB Type-C₹17,578
NVIDIA Jetson Orin Nano Super developer kit: to process point clouds and depthNVIDIA Jetson Orin Nano Super Developer Kit₹54,724
Raspberry Pi 5 single board computer: to run ROS or Python for scanning LiDARRaspberry Pi 5 16GB RAM Single Board Computer₹36,169Closest match, check the specs
Alternatives and when to choose them
- Depth cameras RealSense and OAK: stereo depth with AI.
- Multi-zone ToF: tiny 8 x 8 depth.
- 3D LiDAR: long range.
Common mistakes to avoid
- Using indoor ToF in sunlight.
- Facing two cameras at each other.
- Expecting depth on mirrors.
- Objects closer than the minimum range.
Frequently asked questions
How is ToF different from stereo depth?
ToF measures light travel time, so it works on plain walls; stereo needs texture.
Does a ToF camera work outdoors?
Strong sunlight drowns the IR signal, so choose a model rated for outdoor use.
Why are some pixels missing?
Dark, shiny or far surfaces return too little light.
Can I use it with a Raspberry Pi?
Yes, Arducam ToF cameras use the Pi CSI port.
Can two ToF cameras face each other?
They can interfere with each other; use sync or different modulation settings.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
