Component guide · Intermediate · 5 min read
2.4GHz RF Modules

AI-Thinker NF-01-N, NF-01-S, NF-03 and NF-05, EByte E01C-ML01DP5, E28 SX1281 2.4GHz LoRa, XY-WA 100mW, 42, 43 and 45 Series 2.4G Remote Switch Transmitters and Receivers and Wireless DMX512
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These 2.4GHz radios are licence-free worldwide. AI-Thinker NF-01, NF-03 and NF-05 and the XY-WA are SPI transceivers similar to the nRF24L01, good for remotes and short sensor links. EByte E01C is a 20dBm amplified version for longer range, and E28 uses the SX1281 for 2.4GHz LoRa. The 42, 43 and 45 series boards are ready transmitter and receiver pairs for switching relays with no code.
Key specs at a glance
- Band
- 2.4GHz ISM
- Interface
- SPI (NF, XY-WA, E01C, E28), direct I/O on remote boards
- Power
- 0 to 27dBm by module
- Range
- Tens of metres to 1km+ (E28 with antenna)
- Supply
- 3.3V for modules, 3-5V or 12V on remote boards
- DMX
- Wireless DMX512 transmitter/receiver for stage lighting
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1AI-Thinker NF-01-N 2.4GHz Wireless Transceiver Module₹174
Option 2AI-Thinker NF-01-S 2.4GHz Wireless Transceiver Module₹116
Option 3AI-Thinker NF-03 2.4GHz Wireless Transceiver Module w/ Onboard Antenna₹111
Option 4AI-Thinker NF-05 2.4GHz GFSK Wireless Transceiver Module₹91
Option 5EByte E01C-ML01DP5 2.4GHz 20dBm Wireless Serial Module w/ SMA-K₹279
Option 6EByte E28-2G4M27SX 2.4GHz SX1281 RF Transceiver Module₹979
What the 2.4GHz proprietary RF modules: AI-Thinker NF series, SX1281, E01C, XY-WA and remote switch boards is
These are 2.4 GHz radio chips and ready boards that send short packets between two microcontrollers without Wi-Fi or Bluetooth, much like the nRF24L01.
Use NF or XY-WA modules where you would use an nRF24L01 but want a different footprint or more power; check the data sheet for which library fits the chip. Use E28 SX1281 when you need LoRa-style range on 2.4GHz, for example RC links. Use the remote switch board pairs for gate openers, lights and pumps where you just need buttons to toggle outputs.
2.4GHz is crowded with Wi-Fi; choose a channel away from your Wi-Fi channel and add a capacitor across the module supply.
2.4GHz proprietary RF modules: AI-Thinker NF series, SX1281, E01C, XY-WA and remote switch boards pinout
The pins on the 2.4GHz proprietary RF modules: AI-Thinker NF series, SX1281, E01C, XY-WA and remote switch boards and what each one does.
| Pin | Function |
|---|---|
| VCC / GND | 3.3V and ground |
| CE / CSN | Chip enable and select |
| SCK / MOSI / MISO | SPI |
| IRQ | Interrupt |
| D0-D6 / relay outs | On remote receiver boards |
- VCC / GND
- 3.3V and ground
- CE / CSN
- Chip enable and select
- SCK / MOSI / MISO
- SPI
- IRQ
- Interrupt
- D0-D6 / relay outs
- On remote receiver boards
Wiring the 2.4GHz proprietary RF modules: AI-Thinker NF series, SX1281, E01C, XY-WA and remote switch boards
Remote boards often have learning buttons: press learn, then the transmitter key to pair.
| 2.4GHz proprietary RF modules: AI-Thinker NF series, SX1281, E01C, XY-WA and remote switch boards pin | Connection | Note |
|---|---|---|
| VCC | 3.3V | Add 10uF near module |
| CE / CSN | D9 / D10 | Arduino |
| SPI | D11 / D12 / D13 | Level shift on 5V boards |
| Remote RX outputs | Relay inputs | Latching or momentary per jumper |
- VCC
- Connection:
- 3.3V
- Note:
- Add 10uF near module
- CE / CSN
- Connection:
- D9 / D10
- Note:
- Arduino
- SPI
- Connection:
- D11 / D12 / D13
- Note:
- Level shift on 5V boards
- Remote RX outputs
- Connection:
- Relay inputs
- Note:
- Latching or momentary per jumper
Example code
For SPI modules, start from the maker's example code; register maps differ from the nRF24L01 on some chips.
1. Power the receiver board (check 5V or 12V on the label).
2. Press the learn button on the receiver; its LED lights.
3. Press a button on the transmitter; the LED flashes and goes out.
4. Test: each transmitter key should switch its output.
5. Set momentary, toggle or latched mode with the jumper or mode button.
6. To clear, hold learn until the LED flashes several times.Setup and tuning
run SPI modules from a clean 3.3 V rail with a 10 to 100 µF capacitor at the module. Transmit bursts cause resets on weak supplies.
channel, data rate, address and payload size must be identical, or nothing is received.
lower data rates (250 kbps) reach further than 2 Mbps.
keep the PCB antenna clear of metal and other boards; use the external-antenna E01C or E28 for range beyond a few tens of metres.
Wi-Fi uses most of the band. Pick a channel above Wi-Fi channel 11 when possible.
What you need
Shop this list19 of 20 found in our store · ₹10,368
AI-Thinker NF-01-N 2.4GHz Wireless Transceiver Module: the part this guide coversAI-Thinker NF-01-N 2.4GHz Wireless Transceiver Module₹174
AI-Thinker NF-01-S 2.4GHz Wireless Transceiver Module: another version this guide coversAI-Thinker NF-01-S 2.4GHz Wireless Transceiver Module₹116
AI-Thinker NF-03 2.4GHz Wireless Transceiver Module w/ Onboard Antenna: another version this guide coversAI-Thinker NF-03 2.4GHz Wireless Transceiver Module w/ Onboard Antenna₹111
AI-Thinker NF-05 2.4GHz GFSK Wireless Transceiver Module: another version this guide coversAI-Thinker NF-05 2.4GHz GFSK Wireless Transceiver Module₹91
EByte E01C-ML01DP5 2.4GHz 20dBm Wireless Serial Module w/ SMA-K: another version this guide coversEByte E01C-ML01DP5 2.4GHz 20dBm Wireless Serial Module w/ SMA-K₹279
EByte E28-2G4M27SX 2.4GHz SX1281 RF Transceiver Module: another version this guide coversEByte E28-2G4M27SX 2.4GHz SX1281 RF Transceiver Module₹979
EByte E28-2G4T27SX Semtech SX1281 2.4GHz LoRa RF Module: another version this guide coversEByte E28-2G4T27SX Semtech SX1281 2.4GHz LoRa RF Module₹1,219
XY-WA 2.4GHz Wireless Transceiver Module, 100mW, SPI, Type A: another version this guide coversXY-WA 2.4GHz Wireless Transceiver Module, 100mW, SPI, Type A₹99
Generic 42 Multi-Function 2.4GHz RF Module w/ PCB Antenna: another version this guide covers42 Multi-Function 2.4GHz RF Module w/ PCB Antenna₹79
Generic 42 Multi-Function 2.4GHz RF Wireless Module – Receiver test panels: another version this guide covers42 Multi-Function 2.4GHz RF Wireless Module – Receiver test panels₹46
Generic 42 Multi-Function 2.4GHz RF Wireless Module – Transmitter test panels: another version this guide covers42 Multi-Function 2.4GHz RF Wireless Module – Transmitter test panels₹46
43 Wireless 2.4G RF Receiver Module 7-Channel I/O Control: another version this guide covers43 Wireless 2.4G RF Receiver Module 7-Channel I/O Control₹59Closest match, check the specs
Generic 43 Wireless 2.4G RF Transmitter Module w/ PCB Antenna: another version this guide covers43 Wireless 2.4G RF Transmitter Module w/ PCB Antenna₹46
Generic 43 Wireless 2.4G Switching RF Module: another version this guide covers43 Wireless 2.4G Switching RF Module₹65
45 Multi-Function 2.4GHz RF Switching Module Receiver Panel: another version this guide covers45 Multi-Function 2.4GHz RF Switching Module Receiver Panel₹59Closest match, check the specs
Generic 45 Multi-Function 2.4GHz RF Switching Module w/ PCB Antenna: another version this guide covers45 Multi-Function 2.4GHz RF Switching Module w/ PCB Antenna₹59
Generic 2.4GHz RF Switching Module w/ PCB Antenna: another version this guide covers2.4GHz RF Switching Module w/ PCB Antenna₹149
Wireless DMX512 2.4GHz Receiver Transmitter PCB Module: another version this guide coversWireless DMX512 2.4GHz Receiver Transmitter PCB Module₹1,569- Uno R3 development board: the controller used in the wiring tableFind this part
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Alternatives and when to choose them
- nRF24L01: the common 2.4GHz module.
- 433MHz RF: simpler, longer wavelength.
- Sub-1GHz FSK transceivers: better range through walls.
Common mistakes to avoid
- Powering the module from 5 V, which destroys most 3.3 V radio chips.
- Using different channel or address settings on the two ends.
- Leaving out the decoupling capacitor, so the link drops on every transmit.
- Choosing a channel right on top of the home Wi-Fi network.
Frequently asked questions
Are these modules compatible with the nRF24L01?
The NF-01 and XY-WA family use nRF24-style chips and often work with the RF24 library, but check each datasheet because registers can differ.
Do I need a licence to use 2.4 GHz modules?
No. 2.4 GHz is a licence-free ISM band in India and most countries, within the normal power limits.
What range can I expect?
Small PCB-antenna modules reach about 10 to 50 m. Amplified modules like the E01C reach several hundred metres in open air, and the E28 LoRa module can pass 1 km.
Can these modules send audio or video?
Not usefully. They send small data packets for remotes, sensors and controls; use Wi-Fi or a VTX for video.
Why does my module work only when touched or reset?
Usually the 3.3 V supply sags when it transmits. Add a capacitor at the module and power it from a stronger regulator.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.



