Component guide · Intermediate · 5 min read
5G M.2 Modules and Industrial Cellular Modems

Quectel RM520N-GL and RM530N-GL, SIMCom SIM8262E-M2, Waveshare 5G Dongle, M.2 to Ethernet and Jetson 5G Kits, Teltonika TRB500, TRM200, TRM240, TRM250 and TRM500, Industrial 4G DTU and SenseCAP 4G Logger
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These give a computer or machine a cellular internet link. 5G M.2 modules such as Quectel RM520N-GL and SIMCom SIM8262E slot into an M.2 Key B socket or a USB 3 dongle board and appear as a network card on Linux, Windows or Jetson. Teltonika TRM modems are rugged USB modems for industrial PCs, TRB500 is a 5G gateway, and a 4G DTU turns RS485 Modbus data into a cellular link.
Key specs at a glance
- 5G modules
- Quectel RM520N-GL / RM530N-GL, SIMCom SIM8262E-M2, M.2 Key B
- Interface
- USB 3.x or PCIe; QMI, MBIM or RNDIS/ECM networking
- Antennas
- 4 x MIMO on 5G; LTE modems 1 or 2
- Industrial modems
- TRM200 Cat 4, TRM240 Cat 1, TRM250 Cat M/NB-IoT, TRM500 5G
- DTU
- RS485 to LTE Cat 4, transparent or Modbus to MQTT
- Supply
- 5 V USB or 9 to 30 V DC on industrial units
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Quectel RM520N-GL / RM530N-GL 5G M.2 Module₹43,600
Option 2SIMCom 5G / RedCap M.2 Module₹32,337
Option 3Waveshare 4G / 5G Module for NVIDIA Jetson₹34,450
Option 4Waveshare 5G DONGLE Module w/ Quad Antennas, USB3.1 & M.2 Key B Interface₹2,479
Option 5Waveshare 5G Dongle Expansion Board (USB 3.2)₹3,450
Option 6Waveshare 5G M.2 to Gigabit Ethernet Converter₹36,850
What the 5G M.2 modules, 5G dongles and industrial LTE and 5G modems: RM520N-GL, SIM8262E, Teltonika TRM and TRB, 4G DTU is
These are cellular modems for computers and machines: 5G M.2 cards for PCs, gateways and Jetsons, and rugged USB or RS485 modems for industrial sites.
Check that your operator's 5G and LTE bands are on the module's band list and that the SIM is activated for data. A 5G module needs all four antennas fitted for full speed; with fewer it still works but slower, and it must never transmit with an empty port.
On Linux, recent kernels and ModemManager detect Quectel and SIMCom modules; set the APN once and NetworkManager brings the link up. Use a powered USB 3 port or the dongle's own supply, since 5G modules draw peaks of 2 to 3 A. Teltonika modems are configured with AT commands or through the router they plug into. For a 4G DTU, set the server, port and serial settings with the maker's PC tool.
5G M.2 modules, 5G dongles and industrial LTE and 5G modems: RM520N-GL, SIM8262E, Teltonika TRM and TRB, 4G DTU pinout
The pins on the 5G M.2 modules, 5G dongles and industrial LTE and 5G modems: RM520N-GL, SIM8262E, Teltonika TRM and TRB, 4G DTU and what each one does.
| Pin | Function |
|---|---|
| M.2 Key B | Module socket on dongle or carrier board |
| SIM slot | Nano SIM, data enabled |
| ANT 0-3 | Four antenna ports on 5G modules |
| USB 3 | Data and power to the host |
| RS485 A/B | Field bus on the DTU |
| DC input | 9-30 V on industrial units |
- M.2 Key B
- Module socket on dongle or carrier board
- SIM slot
- Nano SIM, data enabled
- ANT 0-3
- Four antenna ports on 5G modules
- USB 3
- Data and power to the host
- RS485 A/B
- Field bus on the DTU
- DC input
- 9-30 V on industrial units
Wiring the 5G M.2 modules, 5G dongles and industrial LTE and 5G modems: RM520N-GL, SIM8262E, Teltonika TRM and TRB, 4G DTU
Fit the SIM and antennas with power off; hot-plugging the SIM can leave the module not detecting it until reboot.
| 5G M.2 modules, 5G dongles and industrial LTE and 5G modems: RM520N-GL, SIM8262E, Teltonika TRM and TRB, 4G DTU pin | Connection | Note |
|---|---|---|
| Module | M.2 Key B dongle or carrier | Screw it down |
| Antennas | All four ports | LTE/5G wideband |
| Dongle | USB 3 port | Blue port, good power |
| DTU A/B | Modbus device A/B | Common ground if available |
- Module
- Connection:
- M.2 Key B dongle or carrier
- Note:
- Screw it down
- Antennas
- Connection:
- All four ports
- Note:
- LTE/5G wideband
- Dongle
- Connection:
- USB 3 port
- Note:
- Blue port, good power
- DTU A/B
- Connection:
- Modbus device A/B
- Note:
- Common ground if available
Example code
The APN comes from your operator. Port names and modes (QMI, MBIM) vary by module and firmware; see the module's Linux guide.
# Check the module is seen
lsusb | grep -i -E "quectel|simcom"
mmcli -L # list modems, note the index (e.g. 0)
mmcli -m 0 # bands, signal, SIM state
# Create a connection with your operator's APN
sudo nmcli c add type gsm ifname '*' con-name cell apn YOUR_APN
sudo nmcli c up cell
ip addr # wwan0 or similar now has an IP
ping -c 3 8.8.8.8
# Signal quality via AT port (Quectel)
# echo -e 'AT+QENG="servingcell"\r' > /dev/ttyUSB2Setup and tuning
5G cards need an M.2 Key B slot with USB 3 or PCIe and a SIM slot wired to it; otherwise use a USB 3 adapter board.
connect all four MIMO antennas on 5G cards; missing antennas cut speed and can stop 5G attaching.
use QMI or MBIM on Linux (ModemManager or quectel-CM). On Windows, install the maker's driver package.
set the carrier's APN (for example jionet or airtelgprs.com) if the connection does not come up by itself.
5G cards get hot under load. Add a heatsink or thermal pad, especially in closed enclosures.
What you need
Shop this list13 of 13 found in our store · ₹3,20,326
Quectel RM520N-GL / RM530N-GL 5G M.2 Module: the part this guide coversQuectel RM520N-GL / RM530N-GL 5G M.2 Module₹43,600
SIMCom 5G / RedCap M.2 Module: another version this guide coversSIMCom 5G / RedCap M.2 Module₹32,337
Waveshare 4G / 5G Module for NVIDIA Jetson: another version this guide coversWaveshare 4G / 5G Module for NVIDIA Jetson₹34,450
Waveshare 5G DONGLE Module w/ Quad Antennas, USB3.1 & M.2 Key B Interface: another version this guide coversWaveshare 5G DONGLE Module w/ Quad Antennas, USB3.1 & M.2 Key B Interface₹2,479
Waveshare 5G Dongle Expansion Board (USB 3.2): another version this guide coversWaveshare 5G Dongle Expansion Board (USB 3.2)₹3,450
Waveshare 5G M.2 to Gigabit Ethernet Converter: another version this guide coversWaveshare 5G M.2 to Gigabit Ethernet Converter₹36,850
Teltonika TRB500 Industrial 5G Gateway w/ DIN Mount: another version this guide coversTeltonika TRB500 Industrial 5G Gateway w/ DIN Mount₹50,419
Teltonika TRM200 Industrial LTE Cat-4 USB Modem: another version this guide coversTeltonika TRM200 Industrial LTE Cat-4 USB Modem₹11,289
Teltonika TRM240 Industrial LTE Cat 1 Modem: another version this guide coversTeltonika TRM240 Industrial LTE Cat 1 Modem₹11,750
Teltonika TRM250 Industrial LTE Cat-M / NB-IoT Modem: another version this guide coversTeltonika TRM250 Industrial LTE Cat-M / NB-IoT Modem₹9,272
Teltonika TRM500 Industrial 5G USB Modem w/ 4 SMA Antennas: another version this guide coversTeltonika TRM500 Industrial 5G USB Modem w/ 4 SMA Antennas₹45,829
Waveshare Industrial 4G DTU, RS485 to LTE Cat 4: another version this guide coversWaveshare Industrial 4G DTU, RS485 to LTE Cat 4₹9,000
SenseCAP Sensor Hub 4G Data Logger (Battery Version): another version this guide coversSenseCAP Sensor Hub 4G Data Logger (Battery Version)₹29,601
Alternatives and when to choose them
- Pi 4G and 5G HATs: HATs for Raspberry Pi.
- Teltonika routers: complete routers.
- Industrial 4G routers: more router options.
- GSM, LTE and 5G antennas: antennas for these.
Common mistakes to avoid
- Running a 5G card with only one or two antennas connected.
- Putting the module in a sealed box with no heat path.
- Plugging into a USB 2 port and expecting full 5G speed.
- Forgetting to set the APN, so the modem never gets an IP address.
Frequently asked questions
Will a 5G M.2 module work in a laptop?
Only if the laptop has a Key B WWAN slot that is not locked by a whitelist. A USB 3 adapter board is the easy alternative.
Do these modules work on Indian 5G networks?
The global variants support the main n78 band used in India, but check the module's band list against your carrier.
How do I use a 5G module on a Jetson or Raspberry Pi?
Use a USB 3 or M.2 adapter, then bring the link up with ModemManager, qmicli or quectel-CM as a network interface.
What is a DTU used for?
A DTU sends RS485 data, such as Modbus from meters or PLCs, over 4G to a server with no computer on site.
Why is my 5G speed slow?
Common causes are missing MIMO antennas, a weak signal, falling back to LTE, or a USB 2 port that limits throughput.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
