Buying guide · Beginner · 4 min read
ATL Package 2
Rapid Prototyping, the 3D Printer, UPS, Filament and Craft Materials
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Package 2 gives the lab a way to turn ideas into parts fast: one FDM 3D printer with at least a 160 mm cube build volume, a power backup unit with a two-hour battery, five 1 kg filament spools in different colours, five storage boxes and basic craft materials such as card, foam board and wood glue.
Key specs at a glance
- Printer type
- FDM, at least 160 x 160 x 160 mm
- Nozzle
- 0.3 to 0.4 mm
- Features
- Heated bed, LCD screen, open or free slicer
- Materials
- PLA, ABS, PLA derivatives, flexible filament
- Power backup
- UPS with 2-hour battery
- Filament
- 5 x 1 kg in 5 colours
A shorted, over-charged or damaged lithium cell can get very hot and catch fire. Use a protection board or BMS, never short the terminals, charge on a non-flammable surface and do not leave a charging pack alone. Throw away cells that are swollen or dented.
What is in Package 2
Quantities are the suggested numbers for a batch of 60 students.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| 3D printer kit and tools (FDM, at least 160 x 160 x 160 mm) | 1 | Prints prototypes in PLA and similar filaments. |
| Dedicated UPS or power backup (2-hour battery) | 1 | Keeps a long print alive through a power cut. |
| Filament, 1000 g, five colours | 5 | Plastic for printing. |
| Filament storage box | 5 | Keeps filament dry. |
| Cardboard | 5 | Quick mock-ups. |
| Foam core boards | 5 | Light, easy-to-cut model building. |
| String, 20 m spool, assorted colours | 5 | Tying, hanging and linkages. |
| Rubber bands | 100 | Springs, drives and fastening. |
| Popsicle sticks | 100 | Frames and structures. |
| Wood glue, 500 ml | 2 | Joining wood and card. |
- 3D printer kit and tools (FDM, at least 160 x 160 x 160 mm)
- Qty for 60 students:
- 1
- What it is used for:
- Prints prototypes in PLA and similar filaments.
- Dedicated UPS or power backup (2-hour battery)
- Qty for 60 students:
- 1
- What it is used for:
- Keeps a long print alive through a power cut.
- Filament, 1000 g, five colours
- Qty for 60 students:
- 5
- What it is used for:
- Plastic for printing.
- Filament storage box
- Qty for 60 students:
- 5
- What it is used for:
- Keeps filament dry.
- Cardboard
- Qty for 60 students:
- 5
- What it is used for:
- Quick mock-ups.
- Foam core boards
- Qty for 60 students:
- 5
- What it is used for:
- Light, easy-to-cut model building.
- String, 20 m spool, assorted colours
- Qty for 60 students:
- 5
- What it is used for:
- Tying, hanging and linkages.
- Rubber bands
- Qty for 60 students:
- 100
- What it is used for:
- Springs, drives and fastening.
- Popsicle sticks
- Qty for 60 students:
- 100
- What it is used for:
- Frames and structures.
- Wood glue, 500 ml
- Qty for 60 students:
- 2
- What it is used for:
- Joining wood and card.
Checklist for the printer
The list sets out what the printer must offer. Use it as a checklist when you compare models:
- FDM type with a build volume of at least 160 x 160 x 160 mm (about 4 litres).
- Nozzle between 0.3 and 0.4 mm.
- Slicing software that is free or open source.
- An LCD screen that shows print information.
- A heated print bed.
- Support for PLA, ABS, PLA-based materials and flexible filament.
- An anti-bacterial and anti-fungal cover, and a repair kit with spare springs, screws, keys and tweezers.
Ask the supplier for the exact specification sheet and match it against the current official list before you order.
Why the power backup matters
A long print can run for many hours, and a short power cut ruins the part and wastes filament. The list asks for a dedicated UPS with two hours of backup so that the printer can finish or be paused safely. Connect only the printer to it, and check the UPS rating is higher than the printer's power draw.
First prints and classroom use
- Start with a calibration cube and a small keychain with each student's name.
- Move on to brackets and mounts for the electronics projects, such as a sensor holder or a robot chassis part.
- Keep a log of print time and filament used so students learn to plan.
- Store filament in the dry boxes; moisture makes PLA brittle and rough.
- Our guides on choosing a 3D printer and printer tools and maintenance help with first-day problems.
About this guide
Geekobot is an independent shop. It is not endorsed by, approved by or affiliated with NITI Aayog or the Atal Innovation Mission. The package contents described here come from the public AIM equipment list for a batch of 60 students, summarised in our own words. Check the current list before you buy, because AIM updates it from time to time. Quantities are the suggested numbers for 60 students; a smaller school can scale them down. The official document also sets procurement rules for ATL schools (including purchase through the GeM portal), so check them before ordering for an ATL grant. For questions about the programme, schools should contact AIM using the address in the official document.
Common mistakes to avoid
- Choosing a printer with a smaller build volume than the list requires.
- Forgetting the UPS and losing long prints in a power cut.
- Leaving filament out of its box for weeks.
- Printing without a plan and wasting spools.
- Skipping bed levelling before the first print.
Frequently asked questions
Which 3D printer fits Package 2?
Any FDM printer that meets the checklist above: at least a 160 mm cube build volume, 0.3 to 0.4 mm nozzle, heated bed, LCD, free slicer, and PLA and ABS support. Match the model's data sheet to the current official list.
Is a resin printer allowed?
The Package 2 specification describes an FDM printer. A resin printer needs extra safety steps and is not what the list describes.
How long should the UPS last?
The list asks for a dedicated UPS with a two-hour battery backup.
Which filament should students start with?
PLA. It prints at lower temperatures, has little smell and is forgiving for beginners.
Parts for this guide
Terms in this guide
Keep learning
Sources
- AIM: ATL Equipment List, Batch of 60 Students (public PDF at aim.gov.in)
- AIM: Atal Tinkering Labs overview page at aim.gov.in/atl.php
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


