Concept explainer · Beginner · 4 min read
Atal Tinkering Lab (ATL)
What It Is, What Students Do and What the Lab Contains
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
An Atal Tinkering Lab is a school workspace set up under the Atal Innovation Mission where school students build their own ideas with electronics, robotics, 3D printing and hand tools. Its equipment follows an official list organised into four packages, from electronics and sensors to power and safety gear.
Key specs at a glance
- Run by
- Atal Innovation Mission (AIM), NITI Aayog
- Where
- Schools across India
- Vision (AIM)
- Cultivate one million children as neoteric innovators
- Lab contents
- Four packages: P1 to P4
- Equipment list
- Public list for a batch of 60 students
- Skills
- Design mindset, computational thinking, physical computing
What an ATL is
An Atal Tinkering Lab is a room in a school equipped so that students can make things instead of only reading about them. The Atal Innovation Mission (AIM) describes the aim as helping young people become innovators who are curious, creative and comfortable with technology. A typical lab has an Arduino bench for circuits and sensors, a 3D printer for quick models, hand tools for building frames, and safety gear.
AIM's own overview page (checked October 2026) reports about 10,000 labs across 35 states and union territories, more than a crore students engaged, and over 60 percent of labs in government or government-aided schools. Those numbers change, so always check the page itself.
What students actually do
wire LEDs, buzzers, displays and sensors to a board such as an Arduino Uno and program them.
use motors, servos, a construction kit and hand tools to build robots, gates and moving models.
print a part, cut cardboard or foam, test it, then improve it.
from a rain alarm for the school garden to a water-tank level indicator, the best projects start from something students notice around them.
AIM runs competitions and events such as the ATL Marathon, School Innovation Marathon, Mega Tinkering Day and Tinkerpreneur, which many labs prepare for.
The four equipment packages
The official equipment list groups everything a lab needs into four packages:
| Package | Theme | Typical contents |
|---|---|---|
| P1 | Electronics, robotics, IoT and sensors | Arduino and other boards, sensors, motors, servos, displays, DIY kits |
| P2 | Rapid prototyping | An FDM 3D printer with power backup, filament, craft materials |
| P3 | Mechanical, electrical and measurement tools | Hand and power tools, soldering kits, oscilloscope, multimeters |
| P4 | Power supply, accessories and safety | Glue sticks, fasteners, extension boards, first aid, extinguishers, goggles |
- P1
- Theme:
- Electronics, robotics, IoT and sensors
- Typical contents:
- Arduino and other boards, sensors, motors, servos, displays, DIY kits
- P2
- Theme:
- Rapid prototyping
- Typical contents:
- An FDM 3D printer with power backup, filament, craft materials
- P3
- Theme:
- Mechanical, electrical and measurement tools
- Typical contents:
- Hand and power tools, soldering kits, oscilloscope, multimeters
- P4
- Theme:
- Power supply, accessories and safety
- Typical contents:
- Glue sticks, fasteners, extension boards, first aid, extinguishers, goggles
Where to start
A new lab does not need to unpack everything on day one. Begin with Package 1 and its first lessons (the lesson plan), put safety rules on the wall before anyone picks up a soldering iron (lab safety rules), and add the 3D printer and larger tools once the first projects are running. See how to set up the lab for the room plan and the package overview for what to buy in what order.
About this guide
Geekobot is an independent shop. It is not endorsed by, approved by or affiliated with NITI Aayog or the Atal Innovation Mission. The package contents described here come from the public AIM equipment list for a batch of 60 students, summarised in our own words. Check the current list before you buy, because AIM updates it from time to time. Quantities are the suggested numbers for 60 students; a smaller school can scale them down. The official document also sets procurement rules for ATL schools (including purchase through the GeM portal), so check them before ordering for an ATL grant. For questions about the programme, schools should contact AIM using the address in the official document.
Common mistakes to avoid
- Buying everything at once and leaving boxes unopened.
- Treating the lab as a computer class instead of a place to build.
- Skipping safety rules and eye protection.
- Letting one or two students do all the building.
- Not storing small parts in labelled drawers, so they get lost.
Frequently asked questions
Who can use an Atal Tinkering Lab?
Students of the school it is set up in, guided by teachers and mentors. AIM's programme is aimed at school students, and the curriculum is published in English and Hindi.
Is the equipment list compulsory?
The official document says it is mandatory for schools to purchase the equipment mentioned in the list as per their requirement, and that the list is not exhaustive. It also says procurement is through the GeM portal. Read the current version on the AIM website for the exact rules.
Does a lab need all four packages?
The list is organised into four packages, and schools can spend up to a stated maximum across all of them. Which items to buy first is a school decision.
Is Geekobot part of the Atal Innovation Mission?
No. Geekobot is an independent shop that sells electronics parts and writes learning guides. It is not endorsed by or affiliated with NITI Aayog or AIM.
Parts for this guide
Terms in this guide
Keep learning
Sources
- AIM: ATL Equipment List, Batch of 60 Students (public PDF at aim.gov.in)
- AIM: Atal Tinkering Labs overview page at aim.gov.in/atl.php
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




