Buying guide · Beginner · 9 min read
ATL Package 1
Electronics, Robotics, IoT and Sensors, Item by Item
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Package 1 is the electronics heart of an Atal Tinkering Lab: 30 Arduino Uno boards, Nano and Mega boards, Raspberry Pi, NodeMCU and WeMos Wi-Fi boards, breadboards, displays, about 30 sensor types, motors, servos and STEM kits. This guide lists every item with its suggested quantity for 60 students and a one-line use.
Key specs at a glance
- Lines in the list
- 108 lines (shown here in 8 groups)
- Main boards
- Uno x30, Nano x10, Mega x10, Raspberry Pi x5
- Wi-Fi boards
- NodeMCU x6, WeMos D1 x6
- Sensors
- About 30 types incl. 8 MQ gas sensors
- Motion
- Steppers, DC, BO, 4 kinds of servo
- Kits
- Robotics, construction, drone, aerospace, bio and more
How to read the list
The quantities below are the suggested numbers for a batch of 60 students in the official equipment list. Pair-work or small groups mean a lab rarely needs 60 of everything. The wording of each item is shortened; the official document gives exact specifications such as voltage ranges and sizes.
Boards, breadboards and cables
Everything students build starts here.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Arduino Uno or equivalent | 30 | The main learning board: 14 digital pins, 6 analog inputs, USB programming. |
| Arduino Nano or equivalent | 10 | A breadboard-sized Uno-class board for compact builds. |
| Arduino Mega 2560 or equivalent | 10 | 54 digital pins for projects with many sensors and outputs. |
| Raspberry Pi 3 Model B+ (or better) with accessories | 5 | A small Linux computer for cameras, Python and web projects. |
| Node MCU (ESP8266) | 6 | Wi-Fi board for Internet of Things projects. |
| WeMos D1 R2 (ESP8266 Wi-Fi) | 6 | Uno-shaped Wi-Fi board that fits Uno shields. |
| Atmega16u2 IC | 10 | Bare microcontroller chip for chip-level experiments. |
| Solderless breadboard, 400 pin | 30 | Build circuits without soldering. |
| Solderless breadboard, 800 pin | 20 | A larger breadboard for bigger circuits. |
| Self-adhesive proto shield | 20 | Mounts a small breadboard on top of an Uno. |
| General purpose solderable board, 140 x 90 mm | 30 | Perfboard for a finished soldered circuit. |
| General purpose solderable board, 80 x 55 mm | 30 | A smaller perfboard for compact circuits. |
| Female berg strip, 40 pin | 30 | Breakable header sockets for removable modules. |
| Male berg strip, 40 pin | 30 | Breakable header pins for modules and boards. |
| USB cable set (A to B) | 10 | Programs Uno and Mega boards. |
| USB cable set (mini) | 10 | Programs Nano boards. |
| Jumper cables, male-male | 1000 | Wire up breadboard circuits. |
| Jumper cables, male-female | 600 | Connect modules to breadboards and boards. |
| Jumper cables, female-female | 400 | Connect module to module. |
| Alligator connectors, 12 inch | 200 | Quick temporary connections and test leads. |
| Hook-up wire, red and black, 100 m each | 4 | Permanent wiring for soldered projects. |
| 9 V battery clips with DC jack | 40 | Power a board from a 9 V battery. |
| Rechargeable battery, 9 to 12 V, with 2 chargers | 10 | Portable power for robots and projects. |
- Arduino Uno or equivalent
- Qty for 60 students:
- 30
- What it is used for:
- The main learning board: 14 digital pins, 6 analog inputs, USB programming.
- Arduino Nano or equivalent
- Qty for 60 students:
- 10
- What it is used for:
- A breadboard-sized Uno-class board for compact builds.
- Arduino Mega 2560 or equivalent
- Qty for 60 students:
- 10
- What it is used for:
- 54 digital pins for projects with many sensors and outputs.
- Raspberry Pi 3 Model B+ (or better) with accessories
- Qty for 60 students:
- 5
- What it is used for:
- A small Linux computer for cameras, Python and web projects.
- Node MCU (ESP8266)
- Qty for 60 students:
- 6
- What it is used for:
- Wi-Fi board for Internet of Things projects.
- WeMos D1 R2 (ESP8266 Wi-Fi)
- Qty for 60 students:
- 6
- What it is used for:
- Uno-shaped Wi-Fi board that fits Uno shields.
- Atmega16u2 IC
- Qty for 60 students:
- 10
- What it is used for:
- Bare microcontroller chip for chip-level experiments.
- Solderless breadboard, 400 pin
- Qty for 60 students:
- 30
- What it is used for:
- Build circuits without soldering.
- Solderless breadboard, 800 pin
- Qty for 60 students:
- 20
- What it is used for:
- A larger breadboard for bigger circuits.
- Self-adhesive proto shield
- Qty for 60 students:
- 20
- What it is used for:
- Mounts a small breadboard on top of an Uno.
- General purpose solderable board, 140 x 90 mm
- Qty for 60 students:
- 30
- What it is used for:
- Perfboard for a finished soldered circuit.
- General purpose solderable board, 80 x 55 mm
- Qty for 60 students:
- 30
- What it is used for:
- A smaller perfboard for compact circuits.
- Female berg strip, 40 pin
- Qty for 60 students:
- 30
- What it is used for:
- Breakable header sockets for removable modules.
- Male berg strip, 40 pin
- Qty for 60 students:
- 30
- What it is used for:
- Breakable header pins for modules and boards.
- USB cable set (A to B)
- Qty for 60 students:
- 10
- What it is used for:
- Programs Uno and Mega boards.
- USB cable set (mini)
- Qty for 60 students:
- 10
- What it is used for:
- Programs Nano boards.
- Jumper cables, male-male
- Qty for 60 students:
- 1000
- What it is used for:
- Wire up breadboard circuits.
- Jumper cables, male-female
- Qty for 60 students:
- 600
- What it is used for:
- Connect modules to breadboards and boards.
- Jumper cables, female-female
- Qty for 60 students:
- 400
- What it is used for:
- Connect module to module.
- Alligator connectors, 12 inch
- Qty for 60 students:
- 200
- What it is used for:
- Quick temporary connections and test leads.
- Hook-up wire, red and black, 100 m each
- Qty for 60 students:
- 4
- What it is used for:
- Permanent wiring for soldered projects.
- 9 V battery clips with DC jack
- Qty for 60 students:
- 40
- What it is used for:
- Power a board from a 9 V battery.
- Rechargeable battery, 9 to 12 V, with 2 chargers
- Qty for 60 students:
- 10
- What it is used for:
- Portable power for robots and projects.
Components
Passive parts, LEDs, switches and sounders.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Resistor kit (20 values, 30 each) | 20 | The resistor values every circuit needs. |
| Capacitor kit (10 values, 20 each) | 20 | Timing, filtering and smoothing. |
| Linear voltage regulators 7805, 7809, 7812 | 30 | Steady 5 V, 9 V and 12 V supplies. |
| Diodes and transistors kit (25 of 4 types) | 3 | Switching, protection and amplifying. |
| Button switch set (100: push, toggle, rotary, selector, slide) | 3 | Every kind of user input. |
| LM555 timer IC | 30 | The classic timer for flashers, delays and tone makers. |
| LEDs, 5 mm, red / green / blue / yellow / white | 1000 | Each colour, 1000 pieces: indicators and light shows. |
| RGB LEDs, 5 mm | 400 | Mix any colour with three PWM pins. |
| Active buzzer, small 5 V | 40 | Beeps for alarms and feedback. |
| Active buzzer, big 5 V | 40 | A louder beeper. |
| Piezoelectric plate, about 4 cm | 30 | Works as a tiny speaker and as a knock sensor. |
| Vibrating motor | 20 | Silent alerts and haptic feedback. |
| Laser diode emitter, 650 nm | 10 | A beam for tripwires and light experiments. |
- Resistor kit (20 values, 30 each)
- Qty for 60 students:
- 20
- What it is used for:
- The resistor values every circuit needs.
- Capacitor kit (10 values, 20 each)
- Qty for 60 students:
- 20
- What it is used for:
- Timing, filtering and smoothing.
- Linear voltage regulators 7805, 7809, 7812
- Qty for 60 students:
- 30
- What it is used for:
- Steady 5 V, 9 V and 12 V supplies.
- Diodes and transistors kit (25 of 4 types)
- Qty for 60 students:
- 3
- What it is used for:
- Switching, protection and amplifying.
- Button switch set (100: push, toggle, rotary, selector, slide)
- Qty for 60 students:
- 3
- What it is used for:
- Every kind of user input.
- LM555 timer IC
- Qty for 60 students:
- 30
- What it is used for:
- The classic timer for flashers, delays and tone makers.
- LEDs, 5 mm, red / green / blue / yellow / white
- Qty for 60 students:
- 1000
- What it is used for:
- Each colour, 1000 pieces: indicators and light shows.
- RGB LEDs, 5 mm
- Qty for 60 students:
- 400
- What it is used for:
- Mix any colour with three PWM pins.
- Active buzzer, small 5 V
- Qty for 60 students:
- 40
- What it is used for:
- Beeps for alarms and feedback.
- Active buzzer, big 5 V
- Qty for 60 students:
- 40
- What it is used for:
- A louder beeper.
- Piezoelectric plate, about 4 cm
- Qty for 60 students:
- 30
- What it is used for:
- Works as a tiny speaker and as a knock sensor.
- Vibrating motor
- Qty for 60 students:
- 20
- What it is used for:
- Silent alerts and haptic feedback.
- Laser diode emitter, 650 nm
- Qty for 60 students:
- 10
- What it is used for:
- A beam for tripwires and light experiments.
Displays and inputs
How a project shows information and how people control it.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| 16x2 LCD display (I2C) | 20 | Shows two lines of 16 characters using two data wires. |
| 4-digit 7-segment LED display | 20 | Clocks, timers and counters. |
| 8x8 LED matrix module (MAX7219) | 10 | Pictures, scrolling text and games. |
| Keypad, 16 key | 10 | Passcodes, calculators and quiz buttons. |
| Joystick, 2 axis with push button | 10 | Control a robot, a game or a pan-tilt mount. |
| Capacitive touch module MPR121 (I2C) | 20 | 12 touch inputs on one chip. |
| Capacitive touch switch module TTP223 | 10 | A single touch button. |
| Sound playback module (ISD1820) | 10 | Record and play back a short voice message. |
- 16x2 LCD display (I2C)
- Qty for 60 students:
- 20
- What it is used for:
- Shows two lines of 16 characters using two data wires.
- 4-digit 7-segment LED display
- Qty for 60 students:
- 20
- What it is used for:
- Clocks, timers and counters.
- 8x8 LED matrix module (MAX7219)
- Qty for 60 students:
- 10
- What it is used for:
- Pictures, scrolling text and games.
- Keypad, 16 key
- Qty for 60 students:
- 10
- What it is used for:
- Passcodes, calculators and quiz buttons.
- Joystick, 2 axis with push button
- Qty for 60 students:
- 10
- What it is used for:
- Control a robot, a game or a pan-tilt mount.
- Capacitive touch module MPR121 (I2C)
- Qty for 60 students:
- 20
- What it is used for:
- 12 touch inputs on one chip.
- Capacitive touch switch module TTP223
- Qty for 60 students:
- 10
- What it is used for:
- A single touch button.
- Sound playback module (ISD1820)
- Qty for 60 students:
- 10
- What it is used for:
- Record and play back a short voice message.
Wireless and location
Bluetooth, GSM, GPS, RF and RFID.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Bluetooth module HC-05 | 15 | Control projects from a phone. |
| GSM module (SIM900 class) | 4 | Send SMS from a project. |
| GPS module GY-NEO6MV2 | 4 | Position, speed and time. |
| RF modules Tx and Rx, 315 MHz | 10 | Simple wireless remote links. |
| RFID reader with tags (13.56 MHz) | 10 | Card-based locks and attendance. |
- Bluetooth module HC-05
- Qty for 60 students:
- 15
- What it is used for:
- Control projects from a phone.
- GSM module (SIM900 class)
- Qty for 60 students:
- 4
- What it is used for:
- Send SMS from a project.
- GPS module GY-NEO6MV2
- Qty for 60 students:
- 4
- What it is used for:
- Position, speed and time.
- RF modules Tx and Rx, 315 MHz
- Qty for 60 students:
- 10
- What it is used for:
- Simple wireless remote links.
- RFID reader with tags (13.56 MHz)
- Qty for 60 students:
- 10
- What it is used for:
- Card-based locks and attendance.
Motor drivers, relays and pump
Parts that switch bigger loads than a board pin can drive.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Motor driver module L293D | 10 | Drives small DC motors in both directions. |
| Motor driver shield L298P | 10 | A shield that drives two stronger motors. |
| Relay module, 1 channel, 5 V 10 A | 20 | Switches a larger load from a pin. |
| Relay module, 2 channel, 5 V 10 A | 20 | Two switches on one board. |
| Water pump, 12 V 3 W submersible | 4 | Irrigation and fountain projects. |
- Motor driver module L293D
- Qty for 60 students:
- 10
- What it is used for:
- Drives small DC motors in both directions.
- Motor driver shield L298P
- Qty for 60 students:
- 10
- What it is used for:
- A shield that drives two stronger motors.
- Relay module, 1 channel, 5 V 10 A
- Qty for 60 students:
- 20
- What it is used for:
- Switches a larger load from a pin.
- Relay module, 2 channel, 5 V 10 A
- Qty for 60 students:
- 20
- What it is used for:
- Two switches on one board.
- Water pump, 12 V 3 W submersible
- Qty for 60 students:
- 4
- What it is used for:
- Irrigation and fountain projects.
Sensors
Let the project measure the world.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Ultrasonic sensor module (HC-SR04 type) | 40 | Distance from 2 cm to about 4 m. |
| Temperature and humidity sensor module (DHT11) | 40 | Air temperature and humidity on one wire. |
| Humidity sensor | 10 | Basic humidity sensing. |
| Temperature sensor LM35 | 6 | 10 mV per degree Celsius. |
| LDR light sensor module | 30 | Detects light and dark. |
| IR obstacle avoider sensor module | 20 | Detects objects at 2 to 30 cm; also reads lines. |
| IR sensor array for line following | 10 | Several IR sensors in a row for line-following robots. |
| IR transmitter / receiver (TSOP1738) | 10 | Reads TV-remote signals. |
| PIR motion detector module | 20 | Detects a person moving within about 6 m. |
| Pulse rate heart sensor | 4 | Finger-based pulse reading. |
| Sound sensor module | 10 | Loudness and claps. |
| Big sound microphone module | 10 | A larger electret microphone module. |
| Soil moisture sensor module | 6 | How wet the soil is. |
| Rain drop sensor | 6 | Detects drops of water. |
| Capacitive touch sensor module | 6 | Touch detection on a pad. |
| Metal touch sensor module | 6 | Detects a finger on a metal pad. |
| Flex sensor | 6 | Resistance changes as it bends. |
| Force pressure sensor | 4 | Detects pressure on a pad. |
| Colour recognition sensor (TCS3200) | 4 | Reads red, green and blue light. |
| Water flow sensor | 4 | Counts litres per minute. |
| Triple-axis magnetometer | 10 | A digital compass. |
| Triple-axis accelerometer | 10 | Tilt, shake and motion. |
| MQ-2 smoke gas sensor | 3 | Smoke, LPG and combustible gas. |
| MQ-3 alcohol sensor | 3 | Alcohol vapour. |
| MQ-4 methane sensor | 3 | Methane and natural gas. |
| MQ-5 gas sensor | 3 | LPG and natural gas. |
| MQ-6 LPG sensor | 3 | LPG and butane. |
| MQ-7 carbon monoxide sensor | 3 | Carbon monoxide. |
| MQ-8 hydrogen sensor | 3 | Hydrogen. |
| MQ-135 air quality sensor | 3 | Fumes and stale air. |
| Power bank, 10000 mAh | 5 | 5 V USB power for portable builds. |
- Ultrasonic sensor module (HC-SR04 type)
- Qty for 60 students:
- 40
- What it is used for:
- Distance from 2 cm to about 4 m.
- Temperature and humidity sensor module (DHT11)
- Qty for 60 students:
- 40
- What it is used for:
- Air temperature and humidity on one wire.
- Humidity sensor
- Qty for 60 students:
- 10
- What it is used for:
- Basic humidity sensing.
- Temperature sensor LM35
- Qty for 60 students:
- 6
- What it is used for:
- 10 mV per degree Celsius.
- LDR light sensor module
- Qty for 60 students:
- 30
- What it is used for:
- Detects light and dark.
- IR obstacle avoider sensor module
- Qty for 60 students:
- 20
- What it is used for:
- Detects objects at 2 to 30 cm; also reads lines.
- IR sensor array for line following
- Qty for 60 students:
- 10
- What it is used for:
- Several IR sensors in a row for line-following robots.
- IR transmitter / receiver (TSOP1738)
- Qty for 60 students:
- 10
- What it is used for:
- Reads TV-remote signals.
- PIR motion detector module
- Qty for 60 students:
- 20
- What it is used for:
- Detects a person moving within about 6 m.
- Pulse rate heart sensor
- Qty for 60 students:
- 4
- What it is used for:
- Finger-based pulse reading.
- Sound sensor module
- Qty for 60 students:
- 10
- What it is used for:
- Loudness and claps.
- Big sound microphone module
- Qty for 60 students:
- 10
- What it is used for:
- A larger electret microphone module.
- Soil moisture sensor module
- Qty for 60 students:
- 6
- What it is used for:
- How wet the soil is.
- Rain drop sensor
- Qty for 60 students:
- 6
- What it is used for:
- Detects drops of water.
- Capacitive touch sensor module
- Qty for 60 students:
- 6
- What it is used for:
- Touch detection on a pad.
- Metal touch sensor module
- Qty for 60 students:
- 6
- What it is used for:
- Detects a finger on a metal pad.
- Flex sensor
- Qty for 60 students:
- 6
- What it is used for:
- Resistance changes as it bends.
- Force pressure sensor
- Qty for 60 students:
- 4
- What it is used for:
- Detects pressure on a pad.
- Colour recognition sensor (TCS3200)
- Qty for 60 students:
- 4
- What it is used for:
- Reads red, green and blue light.
- Water flow sensor
- Qty for 60 students:
- 4
- What it is used for:
- Counts litres per minute.
- Triple-axis magnetometer
- Qty for 60 students:
- 10
- What it is used for:
- A digital compass.
- Triple-axis accelerometer
- Qty for 60 students:
- 10
- What it is used for:
- Tilt, shake and motion.
- MQ-2 smoke gas sensor
- Qty for 60 students:
- 3
- What it is used for:
- Smoke, LPG and combustible gas.
- MQ-3 alcohol sensor
- Qty for 60 students:
- 3
- What it is used for:
- Alcohol vapour.
- MQ-4 methane sensor
- Qty for 60 students:
- 3
- What it is used for:
- Methane and natural gas.
- MQ-5 gas sensor
- Qty for 60 students:
- 3
- What it is used for:
- LPG and natural gas.
- MQ-6 LPG sensor
- Qty for 60 students:
- 3
- What it is used for:
- LPG and butane.
- MQ-7 carbon monoxide sensor
- Qty for 60 students:
- 3
- What it is used for:
- Carbon monoxide.
- MQ-8 hydrogen sensor
- Qty for 60 students:
- 3
- What it is used for:
- Hydrogen.
- MQ-135 air quality sensor
- Qty for 60 students:
- 3
- What it is used for:
- Fumes and stale air.
- Power bank, 10000 mAh
- Qty for 60 students:
- 5
- What it is used for:
- 5 V USB power for portable builds.
Motors and servos
Make things move.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Stepper motor 28BYJ-48 with ULN2003 driver | 10 | Precise, repeatable turning. |
| DC motor, 12 V 150 RPM | 20 | Geared motor for robots and mechanisms. |
| DC plastic gear motor with wheel (BO) | 40 | Small robot drive wheels. |
| 150 RPM BO motor | 10 | Another BO gear motor for robot builds. |
| Position servo, metal gear | 10 | Strong arm joints with angle control. |
| Small servo, metal gear | 10 | Compact metal-gear servo. |
| Continuous rotation servo, metal gear | 10 | A servo that spins like a motor. |
| Small servo, plastic gear | 40 | The everyday hobby servo. |
| CCPM 3-channel servo tester | 4 | Test servos without a board. |
- Stepper motor 28BYJ-48 with ULN2003 driver
- Qty for 60 students:
- 10
- What it is used for:
- Precise, repeatable turning.
- DC motor, 12 V 150 RPM
- Qty for 60 students:
- 20
- What it is used for:
- Geared motor for robots and mechanisms.
- DC plastic gear motor with wheel (BO)
- Qty for 60 students:
- 40
- What it is used for:
- Small robot drive wheels.
- 150 RPM BO motor
- Qty for 60 students:
- 10
- What it is used for:
- Another BO gear motor for robot builds.
- Position servo, metal gear
- Qty for 60 students:
- 10
- What it is used for:
- Strong arm joints with angle control.
- Small servo, metal gear
- Qty for 60 students:
- 10
- What it is used for:
- Compact metal-gear servo.
- Continuous rotation servo, metal gear
- Qty for 60 students:
- 10
- What it is used for:
- A servo that spins like a motor.
- Small servo, plastic gear
- Qty for 60 students:
- 40
- What it is used for:
- The everyday hobby servo.
- CCPM 3-channel servo tester
- Qty for 60 students:
- 4
- What it is used for:
- Test servos without a board.
DIY and STEM kits
Ready-made kits that go beyond the electronics bench.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Robotics DIY kit with programmable brain | 3 | A complete robot platform. |
| Mechanical (modular) construction kit | 5 | Metal or plastic parts to build frames and mechanisms. |
| Drone kit | 1 | Build and fly a small drone. |
| Aerospace kit | 1 | Aero-modelling and flight experiments. |
| Automobile kit | 1 | How a vehicle engine works. |
| Bio-medical kit | 1 | Health and body science experiments. |
| Agri-tech kit | 1 | Farming and plant science. |
| Water and sanitation kit | 1 | Water testing and treatment experiments. |
| Bio-tech kit | 1 | Biotechnology experiments. |
| Other STEM application kit | 1 | A kit of the school's choice. |
- Robotics DIY kit with programmable brain
- Qty for 60 students:
- 3
- What it is used for:
- A complete robot platform.
- Mechanical (modular) construction kit
- Qty for 60 students:
- 5
- What it is used for:
- Metal or plastic parts to build frames and mechanisms.
- Drone kit
- Qty for 60 students:
- 1
- What it is used for:
- Build and fly a small drone.
- Aerospace kit
- Qty for 60 students:
- 1
- What it is used for:
- Aero-modelling and flight experiments.
- Automobile kit
- Qty for 60 students:
- 1
- What it is used for:
- How a vehicle engine works.
- Bio-medical kit
- Qty for 60 students:
- 1
- What it is used for:
- Health and body science experiments.
- Agri-tech kit
- Qty for 60 students:
- 1
- What it is used for:
- Farming and plant science.
- Water and sanitation kit
- Qty for 60 students:
- 1
- What it is used for:
- Water testing and treatment experiments.
- Bio-tech kit
- Qty for 60 students:
- 1
- What it is used for:
- Biotechnology experiments.
- Other STEM application kit
- Qty for 60 students:
- 1
- What it is used for:
- A kit of the school's choice.
What to build with it
Geekobot's project library marks every build whose parts all come from this package under the label "Atal Tinkering Lab · Package 1". Open the ATL page to browse them, or follow the first ten lessons. Good starting points are the classroom climate board, the smoke and gas alarm, the ultrasonic distance meter, the line follower robot and the RFID door lock.
About this guide
Geekobot is an independent shop. It is not endorsed by, approved by or affiliated with NITI Aayog or the Atal Innovation Mission. The package contents described here come from the public AIM equipment list for a batch of 60 students, summarised in our own words. Check the current list before you buy, because AIM updates it from time to time. Quantities are the suggested numbers for 60 students; a smaller school can scale them down. The official document also sets procurement rules for ATL schools (including purchase through the GeM portal), so check them before ordering for an ATL grant. For questions about the programme, schools should contact AIM using the address in the official document.
Common mistakes to avoid
- Buying boards of one family and sensors that need a different voltage without checking.
- Skipping header pins and sockets, then struggling to connect modules.
- Not labelling storage drawers, which is how sensors disappear.
- Powering motors from the board's 5 V pin.
- Leaving the gas sensors switched on all day; they need warm-up and run hot.
Frequently asked questions
Do I need all 108 lines for a working lab?
No. Start with Uno boards, breadboards, jumper wires, LEDs, resistors, a few sensors, a motor driver and some servos, then add the rest as projects need them.
Why are there both Arduino and ESP8266 boards?
Arduino Uno and Nano are best for learning the basics. NodeMCU and WeMos D1 add Wi-Fi, so students can make Internet of Things projects such as Wi-Fi weather stations.
Why are the sensor quantities so different?
The list suggests 40 each for the ultrasonic sensor and DHT11 because they are used in almost every first project, but only 3 of each MQ gas sensor because they are used in one-off experiments.
Can I use equivalent parts?
The official list repeatedly says 'or equivalent' for boards. For modules, check voltage and pinout before you swap.
Parts for this guide
Terms in this guide
Keep learning
Sources
- AIM: ATL Equipment List, Batch of 60 Students (public PDF at aim.gov.in)
- AIM: Atal Tinkering Labs overview page at aim.gov.in/atl.php
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.






