How-to · Beginner · 3 min read
Ten First Lessons with ATL Package 1
A Simple Plan Using Uno, Sensors and Motors
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Ten simple lessons take students from a blinking LED to a line-following robot using only Package 1 items. Each lesson names the parts, the skill and a Geekobot project to build. Run one lesson per week in pairs, and finish with a showcase where each group explains how its project works.
Key specs at a glance
- Lessons
- 10, one per week
- Board
- Arduino Uno
- Group size
- Pairs
- Parts
- Only Package 1 items
- Skills
- Wiring, coding, sensors, motors
- Finish
- Showcase day
The ten lessons
Each lesson uses an item from the Package 1 list. Open the ATL page to find each project; names below match the project titles.
| Week | Lesson | Package 1 items | Project to build |
|---|---|---|---|
| 1 | Breadboard and LED basics | Breadboard, LEDs, resistors, button, buzzer, jumpers | Traffic light with pedestrian button |
| 2 | Reading a sensor | DHT11, 16x2 LCD | Classroom temperature and humidity board |
| 3 | Making noise | Active buzzer, LM35, LED | LM35 overheat alarm |
| 4 | Distance with sound | HC-SR04, LCD | Ultrasonic distance meter |
| 5 | Light and dark | LDR, relay or LED | Dusk-to-dawn night light |
| 6 | Beams and alarms | Laser module, LDR module, buzzer | Laser tripwire alarm |
| 7 | Gas and air | MQ-2, MQ-135, LCD | Smoke and gas alarm with LCD |
| 8 | Servos | Servo, joystick | Joystick pan-tilt camera mount |
| 9 | Motors and driver | L293D, BO motors, IR modules | Line follower robot |
| 10 | Showcase | Anything from the lab | Each group presents one build |
- 1
- Lesson:
- Breadboard and LED basics
- Package 1 items:
- Breadboard, LEDs, resistors, button, buzzer, jumpers
- Project to build:
- Traffic light with pedestrian button
- 2
- Lesson:
- Reading a sensor
- Package 1 items:
- DHT11, 16x2 LCD
- Project to build:
- Classroom temperature and humidity board
- 3
- Lesson:
- Making noise
- Package 1 items:
- Active buzzer, LM35, LED
- Project to build:
- LM35 overheat alarm
- 4
- Lesson:
- Distance with sound
- Package 1 items:
- HC-SR04, LCD
- Project to build:
- Ultrasonic distance meter
- 5
- Lesson:
- Light and dark
- Package 1 items:
- LDR, relay or LED
- Project to build:
- Dusk-to-dawn night light
- 6
- Lesson:
- Beams and alarms
- Package 1 items:
- Laser module, LDR module, buzzer
- Project to build:
- Laser tripwire alarm
- 7
- Lesson:
- Gas and air
- Package 1 items:
- MQ-2, MQ-135, LCD
- Project to build:
- Smoke and gas alarm with LCD
- 8
- Lesson:
- Servos
- Package 1 items:
- Servo, joystick
- Project to build:
- Joystick pan-tilt camera mount
- 9
- Lesson:
- Motors and driver
- Package 1 items:
- L293D, BO motors, IR modules
- Project to build:
- Line follower robot
- 10
- Lesson:
- Showcase
- Package 1 items:
- Anything from the lab
- Project to build:
- Each group presents one build
How to run each lesson
- 1Ask a question that the project answers: how hot is the room? Can a robot follow a line?
- 2Demo the finished project for two minutes.
- 3Build in pairs with the parts list from the project page.
- 4Debug with the troubleshooting tips on the page.
- 5Extend: change one thing, such as the alarm level or the colour.
- 6Record what changed in the project notebook.
Simple ways to check learning
- Ask each student to explain one wire in the circuit.
- Ask them to predict what happens when a value changes, then test it.
- Have pairs swap projects and find a deliberate fault.
- At the showcase, give a short checklist: works, explained, safe, tidy.
After the first ten
Move on to Wi-Fi projects with the NodeMCU, the RFID card door lock, the Bluetooth car, or student-designed projects built from the same parts. The Package 1 item guide shows what else is in the lab.
About this guide
Geekobot is an independent shop. It is not endorsed by, approved by or affiliated with NITI Aayog or the Atal Innovation Mission. The package contents described here come from the public AIM equipment list for a batch of 60 students, summarised in our own words. Check the current list before you buy, because AIM updates it from time to time. Quantities are the suggested numbers for 60 students; a smaller school can scale them down. The official document also sets procurement rules for ATL schools (including purchase through the GeM portal), so check them before ordering for an ATL grant. For questions about the programme, schools should contact AIM using the address in the official document.
Run ten first lessons with ATL Package 1
You need: Package 1 sensors and modules · Tools: Arduino Uno, Breadboard, Jumper wires, Laptop with Arduino IDE
Get the parts1 of 1 found in our store · ₹2,17,568
Package 1 sensors and modulesAtal Tinkering Lab Package 1: Electronics, Robotics, IoT and Sensors₹2,17,568
- 1Weeks 1 to 3: circuits and sensorsBuild the traffic light, the climate board and the overheat alarm.
- 2Weeks 4 to 7: sensing the worldBuild the distance meter, night light, laser tripwire and gas alarm.
- 3Weeks 8 and 9: motionBuild the pan-tilt mount and the line follower robot.
- 4Week 10: showcaseEach group presents one build and explains how it works.
Common mistakes to avoid
- Skipping the demo and losing the class's attention.
- Giving each student a different project and spreading the teacher too thin.
- Not leaving time to tidy.
- Moving to robots before students can read a sensor.
- Leaving out the showcase, which motivates the whole term.
Frequently asked questions
Do students need to know coding first?
No. The project pages give complete code. Lesson 2 is the point to explain what the code does, line by line.
What if our lab has no Uno?
Most code works on a Nano or Mega with small changes. Check the pin numbers.
Can I swap lessons?
Yes. The order goes from simple to harder, but any lesson using only Package 1 items can move.
How many boards do I need?
One Uno per pair. The Package 1 list suggests 30 for 60 students.
Parts for this guide
Terms in this guide
Keep learning
Sources
- AIM: ATL Equipment List, Batch of 60 Students (public PDF at aim.gov.in)
- AIM: Atal Tinkering Labs overview page at aim.gov.in/atl.php
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





