Comparison · Beginner · 3 min read
Choosing a Platform for ATL Package 1
Arduino, ESP8266 or Raspberry Pi?
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Make Arduino Uno the main teaching board, add Nano and Mega for compact and large projects, use NodeMCU or WeMos D1 for Wi-Fi, and Raspberry Pi for cameras and Python. The official list advises buying all the parts for a chosen platform together, because sub-components on different platforms are not normally interchangeable.
Key specs at a glance
- Uno
- 5 V, 14 digital pins, easy to learn
- Nano
- Same chip, breadboard size
- Mega
- 54 digital pins, 16 analog
- NodeMCU / WeMos D1
- 3.3 V ESP8266 with Wi-Fi
- Raspberry Pi 3 B+
- Linux computer, camera, Python
- Official note
- Buy parts on one platform together
The boards compared
Package 1 includes five board families.
| Board | Voltage | Best for | Watch out for |
|---|---|---|---|
| Arduino Uno | 5 V | First circuits, sensors, motors, shields | Few pins, no Wi-Fi |
| Arduino Nano | 5 V | Small permanent builds | Needs a mini USB cable |
| Arduino Mega 2560 | 5 V | Many sensors, big displays | Larger board |
| NodeMCU / WeMos D1 | 3.3 V logic | Wi-Fi dashboards, IoT | One analog input; 3.3 V pins |
| Raspberry Pi 3 B+ | 5 V supply, 3.3 V pins | Camera, Python, web servers | Needs SD card, display, careful shutdown |
- Arduino Uno
- Voltage:
- 5 V
- Best for:
- First circuits, sensors, motors, shields
- Watch out for:
- Few pins, no Wi-Fi
- Arduino Nano
- Voltage:
- 5 V
- Best for:
- Small permanent builds
- Watch out for:
- Needs a mini USB cable
- Arduino Mega 2560
- Voltage:
- 5 V
- Best for:
- Many sensors, big displays
- Watch out for:
- Larger board
- NodeMCU / WeMos D1
- Voltage:
- 3.3 V logic
- Best for:
- Wi-Fi dashboards, IoT
- Watch out for:
- One analog input; 3.3 V pins
- Raspberry Pi 3 B+
- Voltage:
- 5 V supply, 3.3 V pins
- Best for:
- Camera, Python, web servers
- Watch out for:
- Needs SD card, display, careful shutdown
What the official note says
The list adds a note for Package 1: the various electronics and robotics platforms are likely to be on different platforms, and their sub-components are normally not interchangeable. Schools should evaluate the available educational platforms, pick one or more, and buy all components on the same platform so that the parts are compatible with each other.
Practical advice
Most Package 1 sensors, displays and motors are written for 5 V Arduino boards.
Remember their pins are 3.3 V.
such as cameras, speech and web servers.
Mixed cables and chargers are the most common cause of problems.
the list includes A-to-B and mini USB sets for a reason.
Next steps
Start with the first ten lessons on an Uno, then try a Wi-Fi project on the NodeMCU. See the Package 1 item list for everything in the box.
About this guide
Geekobot is an independent shop. It is not endorsed by, approved by or affiliated with NITI Aayog or the Atal Innovation Mission. The package contents described here come from the public AIM equipment list for a batch of 60 students, summarised in our own words. Check the current list before you buy, because AIM updates it from time to time. Quantities are the suggested numbers for 60 students; a smaller school can scale them down. The official document also sets procurement rules for ATL schools (including purchase through the GeM portal), so check them before ordering for an ATL grant. For questions about the programme, schools should contact AIM using the address in the official document.
Common mistakes to avoid
- Connecting 5 V sensor outputs directly to 3.3 V ESP8266 pins.
- Buying shields for one board family and expecting them to fit another.
- Giving every student a Raspberry Pi before they have used a breadboard.
- Powering a Raspberry Pi from a weak charger.
- Mixing board types in one class and confusing the code.
Frequently asked questions
Which board should students learn first?
Arduino Uno. It is simple, robust and has the widest range of tutorials and compatible parts.
Can I use an ESP8266 board instead of an Uno?
For some projects, yes, but pins are 3.3 V and there is only one analog input, so many sensors and shields need changes.
Is the Raspberry Pi required in Package 1?
The list suggests five Raspberry Pi 3 Model B+ (or better) units, with accessories.
What does 'equivalent' mean?
A board with the same chip and pin layout, so the same code and parts work. Check the specification before you swap.
Parts for this guide
Terms in this guide
Keep learning
Sources
- AIM: ATL Equipment List, Batch of 60 Students (public PDF at aim.gov.in)
- AIM: Atal Tinkering Labs overview page at aim.gov.in/atl.php
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





