Buying guide · Beginner · 4 min read
ATL Equipment Packages P1 to P4
What Each Package Contains and How to Choose
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
The ATL equipment list has four packages: P1 electronics, robotics, IoT and sensors; P2 rapid prototyping with a 3D printer; P3 mechanical, electrical and measurement tools; P4 power supply, accessories and safety gear. Start with P1 and P4 safety items, add P3 tools, then the P2 printer. The official list caps total school spending across all four.
Key specs at a glance
- P1
- Boards, sensors, motors, servos, kits (108 lines)
- P2
- FDM 3D printer, UPS, filament, craft materials
- P3
- Hand and power tools, soldering, oscilloscope, multimeters
- P4
- Accessories, fasteners, power strips, safety gear
- Batch size
- Suggested quantities are for 60 students
- Budget cap
- Up to 7,00,000 rupees across all packages (per the list)
The four packages side by side
Each package is a theme, not a single box. Within a package, quantities are suggestions for a batch of 60 students, so a smaller school can scale them down.
| Package | Theme | Main items | Why it matters |
|---|---|---|---|
| P1 | Electronics, robotics, IoT, sensors | Uno, Nano, Mega, Raspberry Pi, NodeMCU, sensors, servos, motors, DIY kits | Where students build and program |
| P2 | Rapid prototyping | FDM 3D printer, UPS, filament, storage box, craft supplies | Lets students make a part in hours |
| P3 | Mechanical, electrical, measurement | Hacksaw, pliers, drill, soldering kits, oscilloscope, multimeters, calliper | Turns a circuit into a finished object |
| P4 | Power, accessories, safety | Glue sticks, bolts, cable ties, power strips, first aid, extinguishers, goggles | Keeps work organised and safe |
- P1
- Theme:
- Electronics, robotics, IoT, sensors
- Main items:
- Uno, Nano, Mega, Raspberry Pi, NodeMCU, sensors, servos, motors, DIY kits
- Why it matters:
- Where students build and program
- P2
- Theme:
- Rapid prototyping
- Main items:
- FDM 3D printer, UPS, filament, storage box, craft supplies
- Why it matters:
- Lets students make a part in hours
- P3
- Theme:
- Mechanical, electrical, measurement
- Main items:
- Hacksaw, pliers, drill, soldering kits, oscilloscope, multimeters, calliper
- Why it matters:
- Turns a circuit into a finished object
- P4
- Theme:
- Power, accessories, safety
- Main items:
- Glue sticks, bolts, cable ties, power strips, first aid, extinguishers, goggles
- Why it matters:
- Keeps work organised and safe
A sensible buying order
- 1Safety first (P4): first-aid kit, fire extinguishers, goggles, gloves and masks before any power tool or soldering iron comes out.
- 2Core electronics (P1): Arduino Uno boards, breadboards, jumper wires, LEDs, resistor kits, a few sensors and the motors and servos for your first robot.
- 3Basic tools (P3): multimeters, soldering kits, pliers, wire strippers, a drill, measuring tape.
- 4The 3D printer (P2): once students have designs worth printing. Add the UPS and filament storage at the same time.
- 5Specialised kits: drone, aerospace, bio and agri-tech kits in P1 can come last, when the core group knows the basics.
One platform at a time
The official list adds a note for Package 1: electronics and robotics platforms are normally not interchangeable, so schools should evaluate the available platforms, choose one or more, and buy all components for each on the same platform so the parts work together. In practice, most labs standardise on Arduino for the bench and add Raspberry Pi and ESP8266 boards for specific projects. See choosing a platform.
Package guides
About this guide
Geekobot is an independent shop. It is not endorsed by, approved by or affiliated with NITI Aayog or the Atal Innovation Mission. The package contents described here come from the public AIM equipment list for a batch of 60 students, summarised in our own words. Check the current list before you buy, because AIM updates it from time to time. Quantities are the suggested numbers for 60 students; a smaller school can scale them down. The official document also sets procurement rules for ATL schools (including purchase through the GeM portal), so check them before ordering for an ATL grant. For questions about the programme, schools should contact AIM using the address in the official document.
Common mistakes to avoid
- Starting with the 3D printer and having no projects ready to print.
- Buying incompatible boards from several platforms that cannot share parts.
- Ordering only electronics and no storage or safety equipment.
- Ignoring the suggested quantities and ending up with 60 of everything in a 20-student school.
- Not checking the latest version of the official list.
Frequently asked questions
What is the total budget for the four packages?
The list says schools can spend a maximum of seven lakh rupees across all four packages, and the total quotation should stay within that amount. Check the current document for the exact rule.
Can I buy only some items from a package?
The list says schools buy the equipment mentioned 'as per their requirement', with quantities suggested for 60 students. Scaling the quantities to your batch is a decision for your school; ask your ATL in-charge or write to the AIM help address given in the official document.
Which package should a small school start with?
Start with Package 1 and the safety items from Package 4. Add tools from Package 3 and the printer from Package 2 as projects grow.
Where do the quantities come from?
They are the suggested quantities for a batch of 60 students in the official list. Scale them to your own class size.
Parts for this guide
Terms in this guide
Keep learning
Sources
- AIM: ATL Equipment List, Batch of 60 Students (public PDF at aim.gov.in)
- AIM: Atal Tinkering Labs overview page at aim.gov.in/atl.php
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





