Buying guide · Beginner · 4 min read
ATL Package 3
Mechanical, Electrical and Measurement Tools, Explained
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Package 3 equips the lab to cut, drill, fasten, solder and measure: hacksaws, pliers, a drill machine with stand, clamps, soldering kits, a 50 MHz two-channel oscilloscope, five multimeters, a vernier calliper and measuring tools, plus storage drawers and pegboards to keep it all organised.
Key specs at a glance
- Mechanical
- Saws, pliers, drill, vice, spanners, files
- Electric
- Glue guns, soldering kits, heat gun, oscilloscope
- Measurement
- Tape, rule, calliper, spirit level, multimeters
- Oscilloscope
- At least 50 MHz, 2 channels
- Soldering kit
- 15 to 30 W iron, flux, wick, pump, tips
- Storage
- Two 60-drawer organisers and two pegboards
Mechanical tools
For shaping frames, cutting materials and fastening parts.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Hacksaw frame (12 inch) with 10 blades | 1 | Cut metal and plastic. |
| Mini hacksaw frame (6 inch) with 10 blades | 1 | Small, precise cuts. |
| Pliers set (7 types, 4.5 inch) | 1 | Bend, hold, cut and strip. |
| Tweezer set | 2 | Handle small parts. |
| Ball pein hammer and claw hammer (1 of each) | 1 | Shaping and fixing. |
| C-clamp, 3 inch | 4 | Hold work while you cut or glue. |
| Allen key set | 1 | Hex screws. |
| Drill machine set with bits | 1 | Hole drilling in wood, metal and masonry. |
| Drilling workstation (drill press stand) | 1 | Straighter, safer drilling. |
| Spanner set (12 piece) | 1 | Nuts and bolts. |
| Table-top vice | 1 | Holds work firmly. |
| Precision screwdriver set | 2 | Small electronics screws. |
| Adjustable wrench | 2 | Different nut sizes. |
| Wire stripper and cutter | 5 | Strip insulation cleanly. |
| Multi-purpose screwdriver set (40 pieces) | 3 | Many bit types in one set. |
| Cordless rotary multitool set | 1 | Cut, grind, polish and engrave. |
| Air blower | 1 | Clear dust and shavings. |
| HSS drill bit set (13 pieces) | 1 | Drilling several materials. |
| File set and mini file set (1 of each) | 1 | Smooth rough edges. |
| Cutting mat, A3 | 1 | Protects the table. |
| Plastic storage drawers (60 drawer) | 2 | Sort small parts. |
| Pegboard, 3 ft x 2 ft | 2 | Hang tools on the wall. |
- Hacksaw frame (12 inch) with 10 blades
- Qty for 60 students:
- 1
- What it is used for:
- Cut metal and plastic.
- Mini hacksaw frame (6 inch) with 10 blades
- Qty for 60 students:
- 1
- What it is used for:
- Small, precise cuts.
- Pliers set (7 types, 4.5 inch)
- Qty for 60 students:
- 1
- What it is used for:
- Bend, hold, cut and strip.
- Tweezer set
- Qty for 60 students:
- 2
- What it is used for:
- Handle small parts.
- Ball pein hammer and claw hammer (1 of each)
- Qty for 60 students:
- 1
- What it is used for:
- Shaping and fixing.
- C-clamp, 3 inch
- Qty for 60 students:
- 4
- What it is used for:
- Hold work while you cut or glue.
- Allen key set
- Qty for 60 students:
- 1
- What it is used for:
- Hex screws.
- Drill machine set with bits
- Qty for 60 students:
- 1
- What it is used for:
- Hole drilling in wood, metal and masonry.
- Drilling workstation (drill press stand)
- Qty for 60 students:
- 1
- What it is used for:
- Straighter, safer drilling.
- Spanner set (12 piece)
- Qty for 60 students:
- 1
- What it is used for:
- Nuts and bolts.
- Table-top vice
- Qty for 60 students:
- 1
- What it is used for:
- Holds work firmly.
- Precision screwdriver set
- Qty for 60 students:
- 2
- What it is used for:
- Small electronics screws.
- Adjustable wrench
- Qty for 60 students:
- 2
- What it is used for:
- Different nut sizes.
- Wire stripper and cutter
- Qty for 60 students:
- 5
- What it is used for:
- Strip insulation cleanly.
- Multi-purpose screwdriver set (40 pieces)
- Qty for 60 students:
- 3
- What it is used for:
- Many bit types in one set.
- Cordless rotary multitool set
- Qty for 60 students:
- 1
- What it is used for:
- Cut, grind, polish and engrave.
- Air blower
- Qty for 60 students:
- 1
- What it is used for:
- Clear dust and shavings.
- HSS drill bit set (13 pieces)
- Qty for 60 students:
- 1
- What it is used for:
- Drilling several materials.
- File set and mini file set (1 of each)
- Qty for 60 students:
- 1
- What it is used for:
- Smooth rough edges.
- Cutting mat, A3
- Qty for 60 students:
- 1
- What it is used for:
- Protects the table.
- Plastic storage drawers (60 drawer)
- Qty for 60 students:
- 2
- What it is used for:
- Sort small parts.
- Pegboard, 3 ft x 2 ft
- Qty for 60 students:
- 2
- What it is used for:
- Hang tools on the wall.
Electric tools
For joining and heating.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Hot glue gun | 4 | Fast gluing. |
| Digital oscilloscope (50 MHz, 2 channel) | 1 | See signals as waveforms. |
| Soldering kit (iron, pump, wick, flux, tips, wire) | 4 | Join components permanently. |
| Electric screwdriver set | 1 | Cordless fastening. |
| Dual temperature heat gun | 1 | Shrink tubing and bend plastics. |
| Soldering helping hand | 4 | Holds the work while you solder. |
- Hot glue gun
- Qty for 60 students:
- 4
- What it is used for:
- Fast gluing.
- Digital oscilloscope (50 MHz, 2 channel)
- Qty for 60 students:
- 1
- What it is used for:
- See signals as waveforms.
- Soldering kit (iron, pump, wick, flux, tips, wire)
- Qty for 60 students:
- 4
- What it is used for:
- Join components permanently.
- Electric screwdriver set
- Qty for 60 students:
- 1
- What it is used for:
- Cordless fastening.
- Dual temperature heat gun
- Qty for 60 students:
- 1
- What it is used for:
- Shrink tubing and bend plastics.
- Soldering helping hand
- Qty for 60 students:
- 4
- What it is used for:
- Holds the work while you solder.
Measurement tools
Measure before you cut, and measure the circuit before you power it.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| Return measuring tape, 5 m | 2 | Measure length. |
| Stainless steel rule, 150 mm | 5 | Measure and mark. |
| Digital vernier calliper, 150 mm | 2 | Measure to a fraction of a millimetre. |
| Spirit level, 12 inch | 1 | Check horizontal and vertical. |
| Digital pen electric tester | 1 | Voltage tester. |
| Digital multimeter | 5 | Measure voltage, current and resistance. |
- Return measuring tape, 5 m
- Qty for 60 students:
- 2
- What it is used for:
- Measure length.
- Stainless steel rule, 150 mm
- Qty for 60 students:
- 5
- What it is used for:
- Measure and mark.
- Digital vernier calliper, 150 mm
- Qty for 60 students:
- 2
- What it is used for:
- Measure to a fraction of a millimetre.
- Spirit level, 12 inch
- Qty for 60 students:
- 1
- What it is used for:
- Check horizontal and vertical.
- Digital pen electric tester
- Qty for 60 students:
- 1
- What it is used for:
- Voltage tester.
- Digital multimeter
- Qty for 60 students:
- 5
- What it is used for:
- Measure voltage, current and resistance.
Other lab equipment
Extras that widen what students can explore.
| Item | Qty for 60 students | What it is used for |
|---|---|---|
| DIY paper microscope | 5 | Magnify small things. |
| Telescope | 1 | Terrestrial and astronomical viewing. |
| Sewing kit (semi-automatic machine) | 1 | Wearables and soft projects. |
- DIY paper microscope
- Qty for 60 students:
- 5
- What it is used for:
- Magnify small things.
- Telescope
- Qty for 60 students:
- 1
- What it is used for:
- Terrestrial and astronomical viewing.
- Sewing kit (semi-automatic machine)
- Qty for 60 students:
- 1
- What it is used for:
- Wearables and soft projects.
What to buy first
- 1Multimeters and wire strippers: every circuit needs them.
- 2A soldering kit and helping hand, with ventilation and goggles (see safety rules).
- 3Pliers, screwdriver sets and a hacksaw for building frames.
- 4Measuring tape, rule and calliper.
- 5A drill with a stand, then clamps and a vice.
- 6The oscilloscope, once students are comfortable reading signals.
Using the tools well
- Hang each tool on the pegboard with an outline so missing ones are obvious.
- Teach one tool per session: show, let students try under supervision, then use it in a project.
- Keep a tool log for the drill, heat gun and rotary tool.
- A multimeter is the first debugging tool: see our multimeter guide and the electronics toolkit.
About this guide
Geekobot is an independent shop. It is not endorsed by, approved by or affiliated with NITI Aayog or the Atal Innovation Mission. The package contents described here come from the public AIM equipment list for a batch of 60 students, summarised in our own words. Check the current list before you buy, because AIM updates it from time to time. Quantities are the suggested numbers for 60 students; a smaller school can scale them down. The official document also sets procurement rules for ATL schools (including purchase through the GeM portal), so check them before ordering for an ATL grant. For questions about the programme, schools should contact AIM using the address in the official document.
Common mistakes to avoid
- Buying power tools before hand tools and measuring tools.
- Soldering without ventilation or eye protection.
- Letting students use the heat gun and drill without supervision.
- Mixing tools from the pegboard with consumables.
- Forgetting to calibrate or check the multimeter battery.
Frequently asked questions
Do students use the drill and heat gun themselves?
Teachers decide. The tools are listed as equipment for the lab; safe use needs supervision, instruction and protective gear.
Which soldering iron suits school use?
The list describes a kit with a 15 to 30 watt, 230 volt iron with adjustable temperature, flux, a desoldering pump, wick and several tip shapes.
How many multimeters does a lab need?
The list suggests five. Students share them in pairs or groups.
What does the oscilloscope add?
It shows how a signal changes over time, which helps with PWM, sensors and communication signals that a multimeter cannot show.
Parts for this guide
Terms in this guide
Keep learning
Sources
- AIM: ATL Equipment List, Batch of 60 Students (public PDF at aim.gov.in)
- AIM: Atal Tinkering Labs overview page at aim.gov.in/atl.php
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.






