Component guide · Beginner · 7 min read
Bluetooth Serial Modules

HC-02, HC-08, HC-42D, AT-09, JDY-29, JDY-31, BLE Nano, Beetle BLE, RF Nano, Reyax RYB and RYBG, HopeRF HM-BT, Grove HM13, NiceRF BLE5101, Microchip RN4020, RN4870, BM70 and ATAVRBLE-IOT, Ai-Thinker PB-03 and TB-03F, EByte E72, RTL8762E and BMS Module
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Bluetooth serial modules send UART data wirelessly with AT commands and no Bluetooth code. Classic SPP modules (HC-02, JDY-31) pair with Android phones and PCs like an HC-05. BLE modules (HC-08, HC-42D, AT-09, JDY-29, Reyax, HopeRF, Microchip RN4870) work with iPhones too, through a BLE terminal app. BLE Nano, Beetle BLE and RF Nano combine an ATmega328P with a radio on one board.
Key specs at a glance
- Classic SPP
- HC-02, JDY-31: Android and PC, not iPhone
- BLE 4.x
- HC-08, AT-09 (CC2541), RN4020, BM70
- BLE 5.x
- HC-42D, JDY-29, Reyax RYB, HopeRF HM-BT, PB-03, RN4870
- Interface
- UART, 9600 baud default on most, AT commands
- Logic
- 3.3V; many breakouts accept 5V supply but RX is 3.3V
- Range
- 10-30 m typical; RYBG210/211 high-power versions further
A shorted, over-charged or damaged lithium cell can get very hot and catch fire. Use a protection board or BMS, never short the terminals, charge on a non-flammable surface and do not leave a charging pack alone. Throw away cells that are swollen or dented.
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1HC-02 Bluetooth 2.0 Serial Module (UART)₹479
Option 2HC-02 Bluetooth 2.0 Serial Module 6pin Compatible HC-05/HC-06₹409
Option 3HC-08 Bluetooth 4.0 BLE Serial Module w/ CC2540 Chip₹619
Option 4HC-08 Bluetooth 4.0 BLE Serial Port Module₹651
Option 5HC-42D Bluetooth 5.0 BLE Serial Port Module₹859
Option 6AT-09 Bluetooth 4.0 UART Transceiver Module CC2541₹269
What the Bluetooth serial modules (HC-02, HC-08, HC-42, AT-09, JDY, Reyax, HopeRF, Microchip RN and BM, Ai-Thinker) is
Bluetooth serial modules add a wireless UART link to a microcontroller: classic Bluetooth modules pair with Android, and BLE modules work with iPhones and Android.
Pick classic SPP if you want an Android app like 'Serial Bluetooth Terminal' or a PC COM port. Pick BLE if iPhones must connect or power use matters. AT-09 is a cheap HM-10 style module and works with HM-10 tutorials.
RF Nano is different: it pairs an ATmega328P with an nRF24L01 radio, not Bluetooth. The JBDBT002 module plugs into JBD smart BMS boards to read battery data on a phone.
Bluetooth serial modules (HC-02, HC-08, HC-42, AT-09, JDY, Reyax, HopeRF, Microchip RN and BM, Ai-Thinker) pinout
The pins on the Bluetooth serial modules (HC-02, HC-08, HC-42, AT-09, JDY, Reyax, HopeRF, Microchip RN and BM, Ai-Thinker) and what each one does.
| Pin | Function |
|---|---|
| VCC | 3.3-6V on most breakouts (check) |
| GND | Ground |
| TXD | To Arduino RX |
| RXD | From Arduino TX through a divider |
| STATE / EN | Connection status or AT mode |
- VCC
- 3.3-6V on most breakouts (check)
- GND
- Ground
- TXD
- To Arduino RX
- RXD
- From Arduino TX through a divider
- STATE / EN
- Connection status or AT mode
Wiring the Bluetooth serial modules (HC-02, HC-08, HC-42, AT-09, JDY, Reyax, HopeRF, Microchip RN and BM, Ai-Thinker)
Most module RX pins are 3.3V: use a divider from a 5V Arduino. AT commands usually only work while not connected.
| Bluetooth serial modules (HC-02, HC-08, HC-42, AT-09, JDY, Reyax, HopeRF, Microchip RN and BM, Ai-Thinker) pin | Connection | Note |
|---|---|---|
| TXD | Arduino D10 (SoftwareSerial RX) | 3.3V output reads fine |
| RXD | Arduino D11 through 1k/2k divider | Protect 3.3V input |
| VCC | 5V or 3.3V as marked | Check the module |
- TXD
- Connection:
- Arduino D10 (SoftwareSerial RX)
- Note:
- 3.3V output reads fine
- RXD
- Connection:
- Arduino D11 through 1k/2k divider
- Note:
- Protect 3.3V input
- VCC
- Connection:
- 5V or 3.3V as marked
- Note:
- Check the module
Example code
Set the serial monitor line ending as the module wants (none for HC-08, CR+LF for JDY and many others). Send AT and expect OK.
#include <SoftwareSerial.h>
SoftwareSerial bt(10, 11); // RX, TX (TX through a divider)
void setup() {
Serial.begin(9600);
bt.begin(9600); // default for HC-08, AT-09, JDY
Serial.println("Type AT to test");
}
void loop() {
if (bt.available()) Serial.write(bt.read());
if (Serial.available()) bt.write(Serial.read());
}Setup and tuning
use HC-05 or JDY-31 style classic modules for Android serial apps, and BLE modules (HC-08, AT-09, JDY-23) for iPhone support.
most modules default to 9600 baud; set the same speed in your sketch.
the RX pin is 3.3 V on most modules. Use a divider from a 5 V Arduino TX.
change the name, PIN or baud rate in AT mode before pairing.
BLE modules connect from the app, not from the phone's Bluetooth settings.
What you need
Shop this list20 of 20 found in our store · ₹12,052
HC-02 Bluetooth 2.0 Serial Module (UART): the part this guide coversHC-02 Bluetooth 2.0 Serial Module (UART)₹479
HC-02 Bluetooth 2.0 Serial Module 6pin Compatible HC-05/HC-06: another version this guide coversHC-02 Bluetooth 2.0 Serial Module 6pin Compatible HC-05/HC-06₹409
HC-08 Bluetooth 4.0 BLE Serial Module w/ CC2540 Chip: another version this guide coversHC-08 Bluetooth 4.0 BLE Serial Module w/ CC2540 Chip₹619
HC-08 Bluetooth 4.0 BLE Serial Port Module: another version this guide coversHC-08 Bluetooth 4.0 BLE Serial Port Module₹651
HC-42D Bluetooth 5.0 BLE Serial Port Module: another version this guide coversHC-42D Bluetooth 5.0 BLE Serial Port Module₹859
AT-09 Bluetooth 4.0 UART Transceiver Module CC2541: another version this guide coversAT-09 Bluetooth 4.0 UART Transceiver Module CC2541₹269
JDY-29 BLE 5.2 Module with Base Plate: another version this guide coversJDY-29 BLE 5.2 Module with Base Plate₹112
JDY-29 Bluetooth 5.2 BLE Transparent Serial Module: another version this guide coversJDY-29 Bluetooth 5.2 BLE Transparent Serial Module₹83
JDY-31 SPP-C Bluetooth 2.0 Serial Pass-Through Module: another version this guide coversJDY-31 SPP-C Bluetooth 2.0 Serial Pass-Through Module₹160
JDY-31B Bluetooth 3.0 SPP Module (HC-05/06 Compatible): another version this guide coversJDY-31B Bluetooth 3.0 SPP Module (HC-05/06 Compatible)₹83
JDY-31B Bluetooth 3.0 SPP Module w/ Base Plate: another version this guide coversJDY-31B Bluetooth 3.0 SPP Module w/ Base Plate₹117
Generic BLE Nano Integrated CC2540 Bluetooth Module w/ ATmega328P: another version this guide coversBLE Nano Integrated CC2540 Bluetooth Module w/ ATmega328P₹1,109
DFRobot Beetle BLE Arduino Uno Board with Bluetooth 4.0: another version this guide coversDFRobot Beetle BLE Arduino Uno Board with Bluetooth 4.0₹1,429
RF Nano Integrated NRF24L01 Wireless Module with ATmega328P: another version this guide coversRF Nano Integrated NRF24L01 Wireless Module with ATmega328P₹1,159
Reyax RYB080I Bluetooth 4.2 & 5.0 BLE Module w/ Integrated Antenna: another version this guide coversReyax RYB080I Bluetooth 4.2 & 5.0 BLE Module w/ Integrated Antenna₹569
Reyax RYB080ILITE 2.4GHz Bluetooth 4.2 & 5.0 BLE Module DIP: another version this guide coversReyax RYB080I_LITE 2.4GHz Bluetooth 4.2 & 5.0 BLE Module DIP₹809
Reyax RYB2340 2.4GHz BLE Module w/ PCB Antenna: another version this guide coversReyax RYB2340 2.4GHz BLE Module w/ PCB Antenna₹349
Reyax RYB2340Lite 2.4GHz BLE 5.3 Module w/ Integrated Antenna: another version this guide coversReyax RYB2340_Lite 2.4GHz BLE 5.3 Module w/ Integrated Antenna₹1,109
Reyax RYB5510 2.4GHz Bluetooth 5.4 Thread, Matter, Zigbee Module w/ Antenna: another version this guide coversReyax RYB5510 2.4GHz Bluetooth 5.4 Thread, Matter, Zigbee Module w/ Antenna₹909
Reyax RYBG210 Bluetooth 5.2 High Power Long Range Module: another version this guide coversReyax RYBG210 Bluetooth 5.2 High Power Long Range Module₹769
Alternatives and when to choose them
- HC-05 Bluetooth: classic master/slave module.
- nRF52 and HM-10 modules: HM-10 tutorials.
- nRF52 dev boards: programmable BLE.
Common mistakes to avoid
- Expecting a classic Bluetooth module to work with an iPhone.
- Sending 5 V TX straight into the module's 3.3 V RX.
- Using a different baud rate from the module's setting.
- Pairing a BLE module from phone settings instead of the app.
Frequently asked questions
Will an HC-05 work with an iPhone?
No. iPhones do not support classic Bluetooth serial; use a BLE module such as the HC-08 or AT-09.
What is the default PIN for these modules?
Most use 1234 or 0000. Check the module's notes or set your own with AT commands.
Why does my phone pair but receive no data?
Usually the baud rate is wrong, or the TX and RX wires are swapped.
Can I send data both ways?
Yes. It is a two-way serial link, so the phone can send commands and receive readings.
How far does a Bluetooth module reach?
About 10 m indoors for most modules, more in open space.
Parts for this guide
- ₹479View
- ₹409View
- ₹619View
- ₹651View
- ₹859View
- ₹269View
- ₹112View
- ₹83View
- ₹160View
- ₹83View
- ₹117View
- ₹1,109View
- ₹1,429View
- ₹1,159View
- ₹569View
- ₹809View
- ₹349View
- ₹1,109View
- ₹909View
- ₹769View
- ₹909View
- ₹1,529View
- ₹259View
- ₹269View
- ₹219View
- ₹1,899View
- ₹579View
- ₹469View
- ₹1,429View
- ₹1,399View
- ₹1,129View
- ₹7,049View
- ₹131View
- ₹209View
- ₹699View
- ₹249View
- ₹295View
- ₹539View
- ₹359View
- ₹49View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




















