Component guide · Intermediate · 5 min read
Nordic Bluetooth Modules and Boards

nRF52840 Dongle and Modules, nRF54L15-DK, Adafruit Feather nRF52840, SparkFun Pro nRF52840 Mini, Pro Micro nRF52840, EByte E73 and E104, Holyiot, IndieSemiC, nRF5340 and nRF51822 Boards
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Nordic nRF chips are the most common low-power Bluetooth LE microcontrollers. The nRF52840 adds USB, Thread and Zigbee and is used on the Feather nRF52840, Pro Micro nRF52840 (nice!nano style, for keyboards) and the USB dongle. nRF52832 and nRF52810 are cheaper BLE-only chips on small modules. nRF5340 is dual core; the nRF54L15-DK is Nordic's newest kit. nRF51822 boards are older BLE 4.0 parts.
Key specs at a glance
- nRF52840
- Cortex-M4F 64 MHz, 1 MB flash, USB, BLE 5, Thread, Zigbee
- nRF52832
- Cortex-M4F, 512 KB flash, BLE 5
- nRF52810/52805
- Cortex-M4, 192 KB flash, low cost BLE
- nRF5340
- Dual Cortex-M33, BLE 5.3, LE Audio
- nRF54L15
- Cortex-M33 128 MHz, 1.5 MB RRAM, BLE 6 ready
- Software
- nRF Connect SDK (Zephyr), Arduino (Adafruit nRF52), CircuitPython
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Adafruit Feather nRF52840 Express BLE Development Board₹3,199
Option 2Adafruit nRF52840 Sensor Board w/ LIS3DH & PDM Mic₹2,759
Option 3EByte E104-BT5032A nRF52832 BLE 5.0 Module w/ Ceramic Antenna₹629
Option 4EByte E104-BT5032U nRF52840/52832 BLE 5.0/4.2 Packet Capture Dongle₹749
Option 5EByte E73-2G4M04S1A nRF52810 BLE 5.0 Wireless Module₹459
Option 6EByte E73-2G4M04S1BX nRF52832 BLE 5.0 Module w/ IPEX Antenna₹559
What the Nordic nRF52, nRF53 and nRF54 Bluetooth modules and dev boards is
nRF52 BLE modules and dev boards, such as the nRF52840 Dongle, Seeed XIAO nRF52840 and Adafruit Feather nRF52840, give Bluetooth LE, Thread and USB with low power.
Beginners should start with a board that has USB and a bootloader: Feather nRF52840, SparkFun Pro nRF52840 Mini or the Pro Micro nRF52840. These work in the Arduino IDE with the Adafruit nRF52 core, and the Pro Micro is popular for ZMK wireless keyboards.
Bare modules (EByte E73, Holyiot, IndieSemiC) have no USB bootloader: program them over SWD with a J-Link, an nRF52-DK or a CMSIS-DAP probe. The nRF52840 Dongle works as a BLE sniffer with nRF Sniffer and Wireshark.
Nordic nRF52, nRF53 and nRF54 Bluetooth modules and dev boards pinout
The pins on the Nordic nRF52, nRF53 and nRF54 Bluetooth modules and dev boards and what each one does.
| Pin | Function |
|---|---|
| SWDIO / SWCLK | Programming and debug on modules |
| USB | nRF52840 boards with bootloader |
| GPIO | 1.7-3.6V logic |
| Antenna | PCB, ceramic or u.FL |
| 32 kHz crystal | On most modules for low-power timing |
- SWDIO / SWCLK
- Programming and debug on modules
- USB
- nRF52840 boards with bootloader
- GPIO
- 1.7-3.6V logic
- Antenna
- PCB, ceramic or u.FL
- 32 kHz crystal
- On most modules for low-power timing
Wiring the Nordic nRF52, nRF53 and nRF54 Bluetooth modules and dev boards
Never apply 5V to nRF GPIO. Keep metal away from the antenna end of modules.
| Nordic nRF52, nRF53 and nRF54 Bluetooth modules and dev boards pin | Connection | Note |
|---|---|---|
| Programmer | SWDIO, SWCLK, GND, VDD | 3.3V only |
| Sensors | Any free GPIO as I2C or SPI | Pins are freely mapped |
| Battery | LiPo on Feather and Pro Micro | Mind polarity |
- Programmer
- Connection:
- SWDIO, SWCLK, GND, VDD
- Note:
- 3.3V only
- Sensors
- Connection:
- Any free GPIO as I2C or SPI
- Note:
- Pins are freely mapped
- Battery
- Connection:
- LiPo on Feather and Pro Micro
- Note:
- Mind polarity
Example code
Connect with the Bluefruit Connect or nRF Connect app and open the UART view. For bare modules, use the nRF Connect SDK samples instead.
#include <bluefruit.h>
BLEUart bleuart;
void setup() {
Bluefruit.begin();
Bluefruit.setName("Geekobot-nRF");
bleuart.begin();
Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
Bluefruit.Advertising.addService(bleuart);
Bluefruit.ScanResponse.addName();
Bluefruit.Advertising.start(0);
}
void loop() {
bleuart.print("t=");
bleuart.println(millis() / 1000);
delay(1000);
}Setup and tuning
use Arduino (Adafruit nRF52 or Seeed core), Zephyr with nRF Connect SDK, or CircuitPython.
double-tap reset to enter UF2 bootloader mode and drag files on.
pins are 3.3 V; many boards include a LiPo charger.
test with nRF Connect on your phone.
use sleep modes for coin-cell projects.
What you need
Shop this list20 of 20 found in our store · ₹32,333
Adafruit Feather nRF52840 Express BLE Development Board: the part this guide coversAdafruit Feather nRF52840 Express BLE Development Board₹3,199
Adafruit nRF52840 Sensor Board w/ LIS3DH & PDM Mic: another version this guide coversAdafruit nRF52840 Sensor Board w/ LIS3DH & PDM Mic₹2,759
EByte E104-BT5032A nRF52832 BLE 5.0 Module w/ Ceramic Antenna: another version this guide coversEByte E104-BT5032A nRF52832 BLE 5.0 Module w/ Ceramic Antenna₹629
EByte E104-BT5032U nRF52840/52832 BLE 5.0/4.2 Packet Capture Dongle: another version this guide coversEByte E104-BT5032U nRF52840/52832 BLE 5.0/4.2 Packet Capture Dongle₹749
EByte E73-2G4M04S1A nRF52810 BLE 5.0 Wireless Module: another version this guide coversEByte E73-2G4M04S1A nRF52810 BLE 5.0 Wireless Module₹459
EByte E73-2G4M04S1BX nRF52832 BLE 5.0 Module w/ IPEX Antenna: another version this guide coversEByte E73-2G4M04S1BX nRF52832 BLE 5.0 Module w/ IPEX Antenna₹559
EByte E73-2G4M08S1C nRF52840 BLE 5.0 SMD Module: another version this guide coversEByte E73-2G4M08S1C nRF52840 BLE 5.0 SMD Module₹809
Elecrow Pro Micro nRF52840 Dev Board Compatible w/ nice!nano V2.0: another version this guide coversElecrow Pro Micro nRF52840 Dev Board Compatible w/ nice!nano V2.0₹819
Holyiot 16048 nRF52832 IoT Wireless Transceiver Module: another version this guide coversHolyiot 16048 nRF52832 IoT Wireless Transceiver Module₹729
Holyiot 17095 nRF52832 BLE Transceiver Module w/ Ceramic Antenna: another version this guide coversHolyiot 17095 nRF52832 BLE Transceiver Module w/ Ceramic Antenna₹919
Holyiot 18010 nRF52840 BLE Module w/ Bluetooth 5, Zigbee & Thread: another version this guide coversHolyiot 18010 nRF52840 BLE Module w/ Bluetooth 5, Zigbee & Thread₹1,129
Holyiot 18039 nRF52840 BLE 5.0 Module w/ Zigbee & Thread: another version this guide coversHolyiot 18039 nRF52840 BLE 5.0 Module w/ Zigbee & Thread₹1,459
Holyiot 21069 nRF5340 Ultra-Low Power Wireless Module: another version this guide coversHolyiot 21069 nRF5340 Ultra-Low Power Wireless Module₹1,659
IndieSemiC EVK-ISC-nRF52810-A Nordic Semiconductor nRF52810 BLE 5.2 Module Dev Board: another version this guide coversIndieSemiC EVK-ISC-nRF52810-A Nordic Semiconductor nRF52810 BLE 5.2 Module Dev Board₹989
IndieSemiC ISC-nRF52840-A BLE Module – Nordic Semiconductor nRF52840 Bluetooth 5.4, PCB Antenna: another version this guide coversIndieSemiC ISC-nRF52840-A BLE Module – Nordic Semiconductor nRF52840 Bluetooth 5.4, PCB Antenna₹819
Nordic Semiconductor nRF52840 BLE Module with Ceramic Antenna: another version this guide coversNordic Semiconductor nRF52840 BLE Module with Ceramic Antenna₹1,449
Nordic Semiconductor Semiconductor nRF52840 Dongle Bluetooth 5.4 Module: another version this guide coversNordic Semiconductor nRF52840 Dongle Bluetooth 5.4 Module₹1,779Closest match, check the specs
Nordic Semiconductor Semiconductor nRF54L15-DK Multiprotocol Development Kit: another version this guide coversNordic Semiconductor nRF54L15-DK Multiprotocol Development Kit₹5,572Closest match, check the specs
Generic Promicro NRF52840 Development Board: another version this guide coversPromicro NRF52840 Development Board₹759
SparkFun Pro nRF52840 Mini Bluetooth Development Board: another version this guide coversSparkFun Pro nRF52840 Mini Bluetooth Development Board₹5,089
Alternatives and when to choose them
- nRF52 and HM-10 BLE modules: simpler AT-command modules.
- STM32 BLE boards: ST alternative.
- BLE serial modules: no-code UART links.
Common mistakes to avoid
- Using 5 V logic.
- Leaving radios always on.
- Wrong board package.
- Overwriting the bootloader.
Frequently asked questions
Can I use Arduino IDE with nRF52 boards?
Yes, with the Adafruit or Seeed nRF52 board package.
What is the nRF52840 good for?
It suits BLE wearables, USB devices, and Thread or Zigbee smart home projects.
How do I enter bootloader mode?
Double-tap the reset button; a USB drive appears for drag-and-drop updates.
Can it run on a coin cell?
Yes, with sleep modes and slow advertising it can run for months on a coin cell.
Which app helps test BLE?
The free nRF Connect app on Android or iOS scans and tests BLE devices.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





