Component guide · Advanced · 3 min read
STM32 Bluetooth LE Boards

NUCLEO-WB55RG, NUCLEO-WB05KZ, NUCLEO-WB07CC, NUCLEO-WB09KE and WeAct STM32WBA65 Core Board
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
STM32 wireless chips put a Bluetooth LE radio next to an Arm Cortex-M core. The NUCLEO-WB55 runs BLE, Zigbee or Thread using a radio firmware on a second core. The newer STM32WB0 boards (WB05, WB07, WB09) are simpler, low-cost BLE-only chips. The WeAct STM32WBA65 is a small core board with BLE 5.3 plus Zigbee and Thread support.
Key specs at a glance
- NUCLEO-WB55
- Cortex-M4 plus Cortex-M0+ radio core, BLE 5.4, Zigbee 3.0, Thread
- STM32WB0
- Cortex-M0+, BLE 5.4, very low power
- STM32WBA65
- Cortex-M33, BLE 5.3/5.4, Zigbee, Thread, USB
- Programming
- ST-LINK on Nucleo, SWD on the WeAct board
- Tools
- STM32CubeIDE, STM32CubeWB/WB0/WBA packs, ST BLE Toolbox app
- Arduino
- STM32duinoBLE supports WB55
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1NUCLEO-WB55RG Nucleo-64 Dev Board STM32WB55RGV6U₹6,719
Option 2STM32 NUCLEO-WB05KZ Development Board – Arm Cortex-M0+₹2,939
Option 3STM NUCLEO-WB07CC Bluetooth LE Dev Board₹4,409
Option 4STM32 NUCLEO-WB09KE Dev Board (BLE, Cortex-M0+)₹4,089
Option 5WeAct STM32WBA65 Core Board BLE5.3 Zigbee Thread₹1,259
What the STM32 Bluetooth LE boards (NUCLEO-WB55, WB05, WB07, WB09 and WeAct STM32WBA65) is
STM32 wireless BLE boards, such as the Nucleo-WB55 and STM32WBA kits, combine an STM32 microcontroller with Bluetooth LE, Zigbee or Thread radios.
Start with ST's example projects: the 'P2P Server' example plus the ST BLE Toolbox phone app shows a working BLE link in a few minutes.
On WB55 the wireless stack runs on the second core and must be flashed separately with STM32CubeProgrammer, once per stack type (BLE, Zigbee or Thread). A wrong or missing radio stack is the usual reason examples do nothing.
STM32 Bluetooth LE boards (NUCLEO-WB55, WB05, WB07, WB09 and WeAct STM32WBA65) pinout
The pins on the STM32 Bluetooth LE boards (NUCLEO-WB55, WB05, WB07, WB09 and WeAct STM32WBA65) and what each one does.
| Pin | Function |
|---|---|
| ST-LINK USB | Flashing, debug, virtual COM |
| User USB | STM32 USB device on WB55 and WBA65 |
| Antenna | PCB antenna, some boards have a u.FL option |
| Arduino headers | On Nucleo-64 WB boards |
| SWD header | On the WeAct core board |
- ST-LINK USB
- Flashing, debug, virtual COM
- User USB
- STM32 USB device on WB55 and WBA65
- Antenna
- PCB antenna, some boards have a u.FL option
- Arduino headers
- On Nucleo-64 WB boards
- SWD header
- On the WeAct core board
Wiring the STM32 Bluetooth LE boards (NUCLEO-WB55, WB05, WB07, WB09 and WeAct STM32WBA65)
Keep metal and batteries away from the PCB antenna for full range.
| STM32 Bluetooth LE boards (NUCLEO-WB55, WB05, WB07, WB09 and WeAct STM32WBA65) pin | Connection | Note |
|---|---|---|
| USB | ST-LINK port | For flashing and serial |
| Sensors | I2C or SPI header pins | 3.3V logic |
| WeAct board | ST-LINK probe on SWD | No on-board debugger |
- USB
- Connection:
- ST-LINK port
- Note:
- For flashing and serial
- Sensors
- Connection:
- I2C or SPI header pins
- Note:
- 3.3V logic
- WeAct board
- Connection:
- ST-LINK probe on SWD
- Note:
- No on-board debugger
Example code
The WB55 must have the BLE full or basic stack flashed on its radio core first. For WB0 and WBA boards, use ST's STM32Cube examples.
#include <STM32duinoBLE.h>
HCISharedMemTransportClass HCISharedMemTransport;
BLELocalDevice BLEObj(&HCISharedMemTransport);
BLELocalDevice& BLE = BLEObj;
BLEService svc("180F");
BLEByteCharacteristic level("2A19", BLERead | BLENotify);
void setup() {
BLE.begin();
BLE.setLocalName("Geekobot-WB55");
svc.addCharacteristic(level);
BLE.addService(svc);
BLE.setAdvertisedService(svc);
BLE.advertise();
}
void loop() {
BLE.poll();
level.writeValue(millis() / 1000 % 100);
delay(1000);
}Setup and tuning
flash the wireless stack to the radio core with STM32CubeProgrammer.
use STM32CubeWB or CubeWBA BLE examples.
test with ST BLE Toolbox or nRF Connect.
use low-power modes for battery devices.
keep the antenna area clear.
What you need
Shop this list6 of 6 found in our store · ₹19,443
NUCLEO-WB55RG Nucleo-64 Dev Board STM32WB55RGV6U: the part this guide coversNUCLEO-WB55RG Nucleo-64 Dev Board STM32WB55RGV6U₹6,719
STM32 NUCLEO-WB05KZ Development Board – Arm Cortex-M0+: another version this guide coversSTM32 NUCLEO-WB05KZ Development Board – Arm Cortex-M0+₹2,939
STM NUCLEO-WB07CC Bluetooth LE Dev Board: another version this guide coversSTM NUCLEO-WB07CC Bluetooth LE Dev Board₹4,409
STM32 NUCLEO-WB09KE Dev Board (BLE, Cortex-M0+): another version this guide coversSTM32 NUCLEO-WB09KE Dev Board (BLE, Cortex-M0+)₹4,089
WeAct STM32WBA65 Core Board BLE5.3 Zigbee Thread: another version this guide coversWeAct STM32WBA65 Core Board BLE5.3 Zigbee Thread₹1,259
USB cable: for power, flashing and the virtual COM portUSB Cable₹28
Alternatives and when to choose them
- nRF52 and HM-10 BLE modules: other BLE options.
- STM32WL LoRa-E5: STM32 with LoRa.
- STM32 Nucleo boards: non-wireless STM32.
Common mistakes to avoid
- Missing stack firmware.
- Wrong stack version for the example.
- Antenna blocked.
- No low-power settings.
Frequently asked questions
Why does my STM32WB BLE example not advertise?
The wireless stack firmware is not flashed on the radio core.
Which app tests the BLE board?
ST BLE Toolbox or nRF Connect on a phone both work well.
Can STM32WB run Zigbee or Thread?
Yes, after flashing the matching Zigbee or Thread stack firmware.
How do I flash the stack?
Follow the FUS update steps in STM32CubeProgrammer to flash the stack.
Can I run it on a coin cell?
Yes, with low-power modes and slow advertising it can run for months.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

