Component guide · Intermediate · 3 min read
Bluetooth LE Motion Sensor Tags

ELA Blue PUCK MOV and Holyiot nRF52832 9-Axis Tracking Tags
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These coin-cell tags contain a motion sensor and a Bluetooth LE radio. They broadcast movement counts or motion data in advertising packets, so a phone, gateway or ESP32 can pick them up without pairing. The ELA Blue PUCK MOV is sealed to IP69K for harsh sites; the Holyiot nRF52832 tags have a 9-axis IMU and can be reprogrammed with your own firmware.
Key specs at a glance
- Radio
- Bluetooth LE 5.0
- Sensor
- 3-axis accelerometer (ELA) or 9-axis IMU (Holyiot)
- Power
- Coin cell or internal battery, months to years
- Range
- About 10 to 50 m indoors
- Protection
- IP69K (ELA), IP67 (Holyiot waterproof)
- Data
- Advertising packets; no pairing needed
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1ELA Innovation Blue PUCK MOV Motion Sensor (IDF25244C) – Bluetooth LE, IP69K, 3-Axis Accelerometer₹4,029
Option 2Holyiot 21091 nRF52832 Motion Sensor Bluetooth Tracking Device – 9-Axis IMU, BLE 5.0, CR2032 Powered₹5,329
Option 3Holyiot 21091 nRF52832 Motion Sensor Bluetooth Tracking Device – BLE 5.0, IP67 Waterproof₹5,329
What the Bluetooth motion sensor tags is
BLE motion tags hold an accelerometer and radio in a small sealed case and broadcast movement or orientation data to a phone or gateway.
Broadcast tags send short packets every few hundred milliseconds or seconds. A gateway near them forwards the data to the cloud over Wi-Fi, Ethernet or LTE.
The Holyiot tags use the Nordic nRF52832, so you can load Nordic SDK or Zephyr firmware to send your own data.
Bluetooth motion sensor tags pinout
The pins on the Bluetooth motion sensor tags and what each one does.
| Pin | Function |
|---|---|
| Battery | Coin cell holder |
| SWD (Holyiot) | Pads for reprogramming |
| Button / LED | On some models |
- Battery
- Coin cell holder
- SWD (Holyiot)
- Pads for reprogramming
- Button / LED
- On some models
Wiring the Bluetooth motion sensor tags
No wiring: an ESP32 scans the tags over the air. The Uno has no Bluetooth.
| Bluetooth motion sensor tags pin | Item | Uno | ESP32 |
|---|---|---|---|
| Tag | No wires; scanned over Bluetooth | ESP32 built-in Bluetooth |
- Tag
- Item:
- No wires; scanned over Bluetooth
- Uno:
- ESP32 built-in Bluetooth
Example code
Decode the manufacturer data with the maker's format. On older ESP32 cores getManufacturerData returns std::string.
#include <BLEDevice.h>
#include <BLEScan.h>
class CB : public BLEAdvertisedDeviceCallbacks {
void onResult(BLEAdvertisedDevice d) {
if (d.getRSSI() < -80) return;
Serial.printf("%s RSSI %d ", d.getAddress().toString().c_str(), d.getRSSI());
String m = d.getManufacturerData();
for (int i = 0; i < m.length(); i++) Serial.printf("%02X", (uint8_t)m[i]);
Serial.println();
}
};
void setup() {
Serial.begin(115200);
BLEDevice::init("");
BLEScan *s = BLEDevice::getScan();
s->setAdvertisedDeviceCallbacks(new CB());
s->setActiveScan(true);
}
void loop() {
BLEDevice::getScan()->start(5, false);
BLEDevice::getScan()->clearResults();
}Setup and tuning
choose motion-detect events or raw data streaming in the maker's app.
set the movement threshold so normal vibration does not trigger events.
fix the tag firmly with adhesive or screws; a loose tag reports false motion.
event mode lasts much longer than continuous streaming.
use a phone, an ESP32 or a BLE gateway within range to collect the data.
What you need
Shop this list4 of 4 found in our store · ₹15,076
ELA Innovation Blue PUCK MOV Motion Sensor (IDF25244C) – Bluetooth LE, IP69K, 3-Axis Accelerometer: the part this guide coversELA Innovation Blue PUCK MOV Motion Sensor (IDF25244C) – Bluetooth LE, IP69K, 3-Axis Accelerometer₹4,029
Holyiot 21091 nRF52832 Motion Sensor Bluetooth Tracking Device – 9-Axis IMU, BLE 5.0, CR2032 Powered: another version this guide coversHolyiot 21091 nRF52832 Motion Sensor Bluetooth Tracking Device – 9-Axis IMU, BLE 5.0, CR2032 Powered₹5,329
Holyiot 21091 nRF52832 Motion Sensor Bluetooth Tracking Device – BLE 5.0, IP67 Waterproof: another version this guide coversHolyiot 21091 nRF52832 Motion Sensor Bluetooth Tracking Device – BLE 5.0, IP67 Waterproof₹5,329
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389
Alternatives and when to choose them
- BLE beacons: location beacons without motion data.
- BLE modules: build your own tag.
- BLE and LoRaWAN loggers: temperature tags.
Common mistakes to avoid
- Setting the threshold so low that vibration triggers events.
- Mounting the tag loosely.
- Streaming raw data all the time and draining the battery.
- Placing the receiver out of BLE range.
Frequently asked questions
What can a motion tag detect?
Movement, tilt, shocks or door openings, depending on its settings.
Can an ESP32 read the tag data?
Yes. An ESP32 can scan the tag's BLE advertisements and decode them with the maker's format.
How long does the battery last?
Months to years in event mode; much less when streaming data continuously.
Is the Holyiot tag programmable?
The nRF52832 tag can take your own firmware with an SWD programmer.
Can I track position with these tags?
Not directly. They sense motion, not location; combine them with beacons for zones.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
