Component guide · Beginner · 4 min read
Bluetooth Audio Modules

VHM-314 MP3 Decoder Boards, CSR8645 aptX Amplifier, KCX BT003, MH-M28 and MH-M38 Receivers, KN319 and amiciSmart Transmitter-Receivers and Microchip BM20 Speaker Module
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These modules turn a speaker or amplifier into a Bluetooth speaker. Receivers such as KCX BT003, MH-M28 and MH-M38 output line-level stereo audio to an amplifier. The CSR8645 board has a built-in amplifier for two small speakers. VHM-314 boards also play MP3 from USB or microSD. KN319 and the amiciSmart dongle can transmit or receive, for adding Bluetooth to a TV or old stereo.
Key specs at a glance
- Supply
- 3.7-5V on most receivers; 8-24V on amplifier boards
- Output
- Line out or 3.5 mm jack; speaker outputs on CSR8645
- Codec
- SBC; aptX on CSR8645
- Extras
- USB/microSD MP3 on VHM-314, buttons for play and volume
- Range
- About 10 m
- Microchip BM20
- Certified speaker module for products
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Blackboard VHM-314 Bluetooth 5.0 MP3 Decoder Board w/ Micro USB₹148
Option 2CSR8645 Bluetooth V4.0 Audio Amplifier Module w/ aptX₹749
Option 3KCX BT003 Bluetooth 4.2 Stereo Audio Receiver Module₹379
Option 4KN319 Bluetooth 5.0 2-in-1 Audio Transmitter & Receiver w/ RCA & AUX₹539
Option 5MH-M28 Bluetooth 4.2 Audio Receiver Board Module w/ 3.5mm Jack₹118
Option 6MH-M38 Wireless Bluetooth Audio Receiver Module w/ Cable₹117
What the Bluetooth audio receiver, amplifier and MP3 modules is
Bluetooth audio modules receive music from a phone and either output line-level audio or drive speakers directly through a built-in amplifier.
Receivers make audible noise if they share a ground with a switching supply or a motor driver: use a clean supply or a ground loop isolator. The line-level output needs an amplifier such as a PAM8403 or TPA3116 board.
Pair from your phone like any Bluetooth speaker; the module's name appears in the list. Most modules reconnect to the last phone automatically.
Bluetooth audio receiver, amplifier and MP3 modules pinout
The pins on the Bluetooth audio receiver, amplifier and MP3 modules and what each one does.
| Pin | Function |
|---|---|
| VCC / GND | Power input |
| L / R / GND | Line-level audio out |
| Speaker +/- | On amplifier boards |
| Buttons | Play, next, volume |
| USB / microSD | On MP3 decoder boards |
- VCC / GND
- Power input
- L / R / GND
- Line-level audio out
- Speaker +/-
- On amplifier boards
- Buttons
- Play, next, volume
- USB / microSD
- On MP3 decoder boards
Wiring the Bluetooth audio receiver, amplifier and MP3 modules
Do not connect amplifier speaker outputs to ground or to each other; many are bridge-tied outputs.
| Bluetooth audio receiver, amplifier and MP3 modules pin | Connection | Note |
|---|---|---|
| Power | 5V USB or the board's DC range | Clean supply |
| Audio out | To amplifier L, R, GND | Short shielded wire |
| Speakers | To amplifier outputs | Match impedance |
- Power
- Connection:
- 5V USB or the board's DC range
- Note:
- Clean supply
- Audio out
- Connection:
- To amplifier L, R, GND
- Note:
- Short shielded wire
- Speakers
- Connection:
- To amplifier outputs
- Note:
- Match impedance
Example code
These modules need no code. For music controlled by an Arduino, use a DFPlayer Mini or VS1053 board instead.
1. Power the Bluetooth receiver from 5V USB.
2. Connect its L, R and GND to the amplifier's audio input.
3. Power the amplifier from its own supply (for example 5V for PAM8403, 12-24V for TPA3116).
4. Connect speakers to the amplifier outputs.
5. Pair your phone with the module name, play music, set volume on the phone first.
6. If you hear buzzing, power both boards from one clean supply or add a ground loop isolator.Setup and tuning
use a clean supply at the module's voltage; noisy supplies add hum and buzzing.
power the module and amplifier from the same supply or use an isolator to avoid hum.
match speaker impedance and power to the amplifier rating.
the module appears with its default name; some let you rename it with AT commands.
set the phone volume high and adjust gain on the amplifier for the cleanest sound.
What you need
Shop this list11 of 11 found in our store · ₹4,895
Blackboard VHM-314 Bluetooth 5.0 MP3 Decoder Board w/ Micro USB: the part this guide coversBlackboard VHM-314 Bluetooth 5.0 MP3 Decoder Board w/ Micro USB₹148
CSR8645 Bluetooth V4.0 Audio Amplifier Module w/ aptX: another version this guide coversCSR8645 Bluetooth V4.0 Audio Amplifier Module w/ aptX₹749
KCX BT003 Bluetooth 4.2 Stereo Audio Receiver Module: another version this guide coversKCX BT003 Bluetooth 4.2 Stereo Audio Receiver Module₹379
KN319 Bluetooth 5.0 2-in-1 Audio Transmitter & Receiver w/ RCA & AUX: another version this guide coversKN319 Bluetooth 5.0 2-in-1 Audio Transmitter & Receiver w/ RCA & AUX₹539
MH-M28 Bluetooth 4.2 Audio Receiver Board Module w/ 3.5mm Jack: another version this guide coversMH-M28 Bluetooth 4.2 Audio Receiver Board Module w/ 3.5mm Jack₹118
MH-M38 Wireless Bluetooth Audio Receiver Module w/ Cable: another version this guide coversBluetooth Audio Receiver₹52
Microchip Technology BM20SPKS1NBC-0001AA Bluetooth 5.0 Audio Module: another version this guide coversMicrochip Technology BM20SPKS1NBC-0001AA Bluetooth 5.0 Audio Module₹1,569
Redboard VHM-314 Bluetooth 4.1 MP3 Decoder Board: another version this guide coversRedboard VHM-314 Bluetooth 4.1 MP3 Decoder Board₹116
amiciSmart Bluetooth 5.0 Transmitter & Receiver Dongle w/ LCD Display: another version this guide coversamiciSmart Bluetooth 5.0 Transmitter & Receiver Dongle w/ LCD Display₹999
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Alternatives and when to choose them
- MAX98357 I2S amplifier: digital audio from ESP32.
- Bluetooth serial modules: data, not audio.
- Arduino learning shields: MP3 shields.
Common mistakes to avoid
- Powering the module from a noisy motor supply.
- Connecting speakers below the amplifier's minimum impedance.
- Creating a ground loop between two separate supplies.
- Turning the amplifier gain up so far that the sound distorts.
Frequently asked questions
Why do I hear a hum or buzz?
Usually a ground loop or a noisy supply. Use one clean supply or an audio isolator.
Can I connect the module to my old speakers?
Yes. Use the line output into an amplifier, or a module with a built-in amplifier.
Does it support aptX?
Only modules with chips that support it, such as the CSR8645 board.
Can it play MP3 files from a USB stick?
The MP3 decoder boards can play USB and SD files as well as Bluetooth audio.
How far is the Bluetooth range?
About 10 m indoors, depending on walls.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
