Component guide · Intermediate · 4 min read
ESP32 HMI Touch Panels

WT32-SC01 and SC01 Plus, WT32S3 2.1, 3.95 and 7 Inch, Elecrow CrowPanel Knob and Solo Miner, SenseCAP Indicator D1, D1S and D1Pro, ESP32-S3-LCD-EV and ESP32-C3-LCDkit
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are finished touch panels with an ESP32 inside, made for smart home controls, machine HMIs and data displays. The WT32-SC01 Plus and WT32S3 boards are bare panels for your own UI; Elecrow's CrowPanel knob is a round touch screen with a rotary dial; SenseCAP Indicator adds an RP2040 co-processor and air-quality sensors; and Espressif's LCD kits are reference designs for developers.
Key specs at a glance
- Chips
- ESP32, ESP32-S3, ESP32-C3 (+ RP2040 on SenseCAP)
- Screens
- 2.1 to 7 inch, 320x480 to 1024x600
- Touch
- Capacitive
- Sensors
- CO2, tVOC, temperature, humidity (SenseCAP D1S/D1Pro)
- Extras
- Rotary knob, speaker, microSD, RS485 (model dependent)
- Software
- LVGL, SquareLine, ESPHome, Arduino, ESP-IDF
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Wireless-Tag WT32-SC01 ESP32-WROVER-B 3.5-Inch LCD HMI Touch Display₹3,929
Option 2Wireless-Tag WT32-SC01 PLUS ESP32-S3 3.5-Inch Touch LCD Dev Board₹4,679
Option 3Wireless-Tag WT32S3-86S | 3.95-Inch IPS LCD Touch Display ESP32-S3 Module₹4,499
Option 4Wireless-Tag WT32S3-21S ESP32-S3 2.1-Inch IPS Display Board₹5,369
Option 5Wireless-Tag WT32S3-07S 7-Inch Touch LCD ESP32-S3 Board₹5,769
Option 6Elecrow CrowPanel 2.1 Inch ESP32 Rotary Display, 480x480 Round Touch Knob₹4,676
What the ESP32 HMI touch panels (WT32-SC01, CrowPanel, SenseCAP Indicator, Espressif LCD kits) is
ESP32 HMI touch panels such as the Sunton ESP32-2432S028 "Cheap Yellow Display" and ESP32-S3 RGB panels combine an ESP32 with a TFT and touch screen for dashboards and controls.
For Home Assistant, flash ESPHome and build pages with LVGL components. For machine panels, design in SquareLine Studio and talk Modbus over RS485 where the panel has it.
The Solo Miner display is a ready-made novelty Bitcoin lottery miner; it is a learning toy, not a profitable miner.
ESP32 HMI touch panels (WT32-SC01, CrowPanel, SenseCAP Indicator, Espressif LCD kits) pinout
The pins on the ESP32 HMI touch panels (WT32-SC01, CrowPanel, SenseCAP Indicator, Espressif LCD kits) and what each one does.
| Pin | Function |
|---|---|
| USB-C | Power, flashing and serial |
| Built-in screen | SPI, QSPI, 8080 parallel or RGB, already wired |
| Touch / buttons | Capacitive touch, buttons, encoder or keyboard depending on the board |
| Expansion | Qwiic/Grove, header pins or microSD |
| Battery | LiPo connector and charger on most |
| Mounting | Frame or 86-box mount on most |
- USB-C
- Power, flashing and serial
- Built-in screen
- SPI, QSPI, 8080 parallel or RGB, already wired
- Touch / buttons
- Capacitive touch, buttons, encoder or keyboard depending on the board
- Expansion
- Qwiic/Grove, header pins or microSD
- Battery
- LiPo connector and charger on most
- Mounting
- Frame or 86-box mount on most
Wiring the ESP32 HMI touch panels (WT32-SC01, CrowPanel, SenseCAP Indicator, Espressif LCD kits)
These boards are complete; use the maker's pin definitions for the screen and touch. Never connect a 5V signal to the 3.3V GPIO.
| ESP32 HMI touch panels (WT32-SC01, CrowPanel, SenseCAP Indicator, Espressif LCD kits) pin | Connection | Note |
|---|---|---|
| USB-C | To a PC to flash | Hold BOOT if not detected |
| Battery | JST LiPo connector | Single cell 3.7V |
| Sensors | I2C or Grove port | 3.3V logic |
- USB-C
- Connection:
- To a PC to flash
- Note:
- Hold BOOT if not detected
- Battery
- Connection:
- JST LiPo connector
- Note:
- Single cell 3.7V
- Sensors
- Connection:
- I2C or Grove port
- Note:
- 3.3V logic
Example code
Copy the display, touchscreen and PSRAM blocks from the panel's ESPHome example, then add pages. Arduino users can start from the maker's LVGL demo.
# Panel-specific display and touch blocks come from the board's ESPHome example
lvgl:
pages:
- id: main
widgets:
- label:
id: temp_label
align: CENTER
text: "--"
text_font: montserrat_28
sensor:
- platform: homeassistant
entity_id: sensor.living_room_temperature
on_value:
- lvgl.label.update:
id: temp_label
text: !lambda 'return str_sprintf("%.1f C", x);'Setup and tuning
use TFT_eSPI, LovyanGFX or the vendor demo, with the pin setup for your exact panel.
LVGL with SquareLine Studio makes buttons and screens; start with the vendor example.
feed 5 V from USB or the power header at 1 A for the backlight.
resistive panels need calibration; capacitive panels use I2C touch chips like GT911.
few GPIO are free; check the header pin list before planning sensors.
What you need
Shop this list13 of 14 found in our store · ₹67,645
Wireless-Tag WT32-SC01 ESP32-WROVER-B 3.5-Inch LCD HMI Touch Display: the part this guide coversWireless-Tag WT32-SC01 ESP32-WROVER-B 3.5-Inch LCD HMI Touch Display₹3,929
Wireless-Tag WT32-SC01 PLUS ESP32-S3 3.5-Inch Touch LCD Dev Board: another version this guide coversWireless-Tag WT32-SC01 PLUS ESP32-S3 3.5-Inch Touch LCD Dev Board₹4,679
Wireless-Tag WT32S3-86S | 3.95-Inch IPS LCD Touch Display ESP32-S3 Module: another version this guide coversWireless-Tag WT32S3-86S | 3.95-Inch IPS LCD Touch Display ESP32-S3 Module₹4,499
Wireless-Tag WT32S3-21S ESP32-S3 2.1-Inch IPS Display Board: another version this guide coversWireless-Tag WT32S3-21S ESP32-S3 2.1-Inch IPS Display Board₹5,369
Wireless-Tag WT32S3-07S 7-Inch Touch LCD ESP32-S3 Board: another version this guide coversWireless-Tag WT32S3-07S 7-Inch Touch LCD ESP32-S3 Board₹5,769
Elecrow CrowPanel 2.1 Inch ESP32 Rotary Display, 480x480 Round Touch Knob: another version this guide coversElecrow CrowPanel 2.1 Inch ESP32 Rotary Display, 480x480 Round Touch Knob₹4,676
Elecrow 2.4 inch ESP32 Solo Miner Display: another version this guide coversElecrow 2.4 inch ESP32 Solo Miner Display₹3,080
Seeed Studio Studio SenseCAP Indicator D1, 4-Inch Touch IoT Platform w/ ESP32-S3 & RP2040: another version this guide coversSeeed Studio SenseCAP Indicator D1, 4-Inch Touch IoT Platform w/ ESP32-S3 & RP2040₹6,299
Seeed Studio Studio SenseCAP Indicator D1Pro 4-Inch Touch Screen IoT Platform w/ ESP32-S3 & RP2040: another version this guide coversSeeed Studio SenseCAP Indicator D1Pro 4-Inch Touch Screen IoT Platform w/ ESP32-S3 & RP2040₹9,759
Seeed Studio Studio SenseCAP Indicator D1S 4-Inch Touch Screen IoT Platform ESP32-S3 & RP2040: another version this guide coversSeeed Studio SenseCAP Indicator D1S 4-Inch Touch Screen IoT Platform ESP32-S3 & RP2040₹8,759
Espressif ESP32-S3-LCD-EV-Board w/ ESP32-S3-WROOM-1: another version this guide coversEspressif ESP32-S3-LCD-EV-Board w/ ESP32-S3-WROOM-1₹7,349
Espressif ESP32-C3-LCDkit Development Board w/ Display & Rotary Encoder: another version this guide coversEspressif ESP32-C3-LCDkit Development Board w/ Display & Rotary Encoder₹2,419
USB-C cable: for power, flashing and the serial monitorArduino USB-C to USB-C Cable w/ USB-A Adapter₹1,059Closest match, check the specs- MAX98357 I2S amplifier: adds sound to boards without a speakerFind this part
Alternatives and when to choose them
- Waveshare ESP32-S3 touch boards: similar panels.
- ESP32 touchscreen boards: low-cost CYD boards.
- LilyGO display boards: pocket size.
Common mistakes to avoid
- Using a TFT_eSPI setup made for another panel.
- Powering the panel from a weak USB port.
- Skipping touch calibration on resistive panels.
- Planning a project that needs more free GPIO than the board has.
Frequently asked questions
Why is my screen white or blank?
The display driver or pin setup does not match the panel. Use the board's exact config.
Can I build a GUI without coding everything?
Yes. SquareLine Studio exports LVGL screens you drop into your sketch.
What is the difference between resistive and capacitive touch?
Resistive needs pressure and calibration; capacitive is like a phone and supports gestures.
Why is the touch position wrong?
Run the calibration sketch and check the rotation matches the display.
How many sensors can I add?
Usually only a few pins and one I2C port are free, so plan carefully.
Parts for this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


