Component guide · Beginner · 5 min read
ESP32-S3 DevKitC Board (N8R8, N16R8)

Pinout, Two USB Ports and Setup
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
The ESP32-S3 DevKitC is the reference board for the ESP32-S3: dual-core 240 MHz with vector instructions for AI, Wi-Fi, BLE 5, native USB and up to 16 MB flash plus 8 MB octal PSRAM. Most boards have two USB-C ports, one through a UART chip and one straight to the chip's USB. The part code tells the memory: N16R8 means 16 MB flash and 8 MB PSRAM.
Key specs at a glance
- Chip
- ESP32-S3, dual-core LX7 240 MHz, 512 KB SRAM
- Memory
- N8R8 (8 MB flash, 8 MB PSRAM), N16R8, N32R16V
- Wireless
- Wi-Fi 2.4 GHz, Bluetooth LE 5 (no Classic)
- USB
- Native USB OTG plus UART bridge
- GPIO
- Up to 45, 3.3 V, many ADC and touch pins
- LED
- WS2812 RGB on GPIO 48 (or 38 on some revisions)
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Espressif ESP32-S3-DevKitC-1-N8R8 Development Board₹1,829
Option 2Espressif ESP32-S3-DevKitC-1-N32R16V Development Board₹2,088
Option 3Espressif ESP32-S3-DevKitC-1U-N8R8 Development Board₹1,879
Option 4Waveshare ESP32-S3 Dev Board w/ ESP32-S3-WROOM-1-N16R8 Module₹1,209
Option 5Waveshare ESP32-S3-WROOM-1-N8R8 Development Board w/o Header₹1,189
Option 6Waveshare ESP32-S3 Development Board w/ Pin Headers₹1,059
What the ESP32-S3 DevKitC board is
The native USB port can act as a serial port, keyboard, mouse or MIDI device and also programs the board. With octal PSRAM boards (R8, R16V) GPIO 35, 36 and 37 are used by the memory, so do not wire anything to them.
Third-party boards from WeAct, Waveshare, YD, Vacus, LilyGO, Unexpected Maker and Adafruit use the same chip, but the RGB LED pin and pin labels differ. Check each board's pinout image.
ESP32-S3 DevKitC board pinout
The pins on the ESP32-S3 DevKitC board and what each one does.
| Pin | Function |
|---|---|
| USB (native) | GPIO 19 / 20 D- / D+ |
| UART USB | Through CP2102/CH343 to UART0 |
| GPIO 0 | BOOT button |
| GPIO 48 or 38 | RGB LED |
| GPIO 35 to 37 | Used by octal PSRAM on R8 boards |
| GPIO 8 / 9 | Common I2C SDA / SCL choice |
| 3V3 / 5V / GND | Power |
- USB (native)
- GPIO 19 / 20 D- / D+
- UART USB
- Through CP2102/CH343 to UART0
- GPIO 0
- BOOT button
- GPIO 48 or 38
- RGB LED
- GPIO 35 to 37
- Used by octal PSRAM on R8 boards
- GPIO 8 / 9
- Common I2C SDA / SCL choice
- 3V3 / 5V / GND
- Power
Wiring the ESP32-S3 DevKitC board
The S3 can route I2C to almost any pin; call Wire.begin(8, 9) with your chosen pins. Avoid GPIO 26 to 32 (flash) and 35 to 37 on octal PSRAM boards.
| ESP32-S3 DevKitC board pin | I2C sensor | Alternative |
|---|---|---|
| VCC | 3V3 | 3V3 |
| GND | GND | GND |
| SDA | GPIO 8 | Any free GPIO |
| SCL | GPIO 9 | Any free GPIO |
- VCC
- I2C sensor:
- 3V3
- Alternative:
- 3V3
- GND
- I2C sensor:
- GND
- Alternative:
- GND
- SDA
- I2C sensor:
- GPIO 8
- Alternative:
- Any free GPIO
- SCL
- I2C sensor:
- GPIO 9
- Alternative:
- Any free GPIO
Example code
Board: ESP32S3 Dev Module. Set Flash Size, PSRAM: OPI PSRAM for R8 boards, and USB CDC On Boot: Enabled to see Serial on the native port.
#include <Adafruit_NeoPixel.h>
Adafruit_NeoPixel led(1, 48, NEO_GRB + NEO_KHZ800); // try 38 if 48 does nothing
void setup() { led.begin(); led.setBrightness(40); }
void loop() {
for (uint16_t h = 0; h < 65535; h += 256) {
led.setPixelColor(0, led.ColorHSV(h));
led.show();
delay(10);
}
}Setup and tuning
Use the UART port for first uploads; switch to native USB once working.
hold BOOT, press RST, release BOOT to force download mode.
choose OPI PSRAM for R8 and R16V boards, QSPI for R2.
the V means 1.8 V PSRAM; select the matching flash and PSRAM mode.
What you need
Shop this list20 of 20 found in our store · ₹30,209
Espressif ESP32-S3-DevKitC-1-N8R8 Development Board: the part this guide coversEspressif ESP32-S3-DevKitC-1-N8R8 Development Board₹1,829
Espressif ESP32-S3-DevKitC-1-N32R16V Development Board: another version this guide coversEspressif ESP32-S3-DevKitC-1-N32R16V Development Board₹2,088
Espressif ESP32-S3-DevKitC-1U-N8R8 Development Board: another version this guide coversEspressif ESP32-S3-DevKitC-1U-N8R8 Development Board₹1,879
Waveshare ESP32-S3 Dev Board w/ ESP32-S3-WROOM-1-N16R8 Module: another version this guide coversWaveshare ESP32-S3 Dev Board w/ ESP32-S3-WROOM-1-N16R8 Module₹1,209
Waveshare ESP32-S3-WROOM-1-N8R8 Development Board w/o Header: another version this guide coversWaveshare ESP32-S3-WROOM-1-N8R8 Development Board w/o Header₹1,189
Waveshare ESP32-S3 Development Board w/ Pin Headers: another version this guide coversWaveshare ESP32-S3 Development Board w/ Pin Headers₹1,059
Waveshare ESP32-S3 Microcontroller Development Board: another version this guide coversWaveshare ESP32-S3 Microcontroller Development Board₹999
WeAct Studio ESP32-S3-DevKitC-1 WiFi BLE 5.0 Mesh Dev Board: another version this guide coversWeAct Studio ESP32-S3-DevKitC-1 WiFi BLE 5.0 Mesh Dev Board₹1,099
WeAct Studio ESP32-S3-B-N16R8 BLE 5.0 Mesh WiFi Development Board: another version this guide coversWeAct Studio ESP32-S3-B-N16R8 BLE 5.0 Mesh WiFi Development Board₹909
EdgeHax ESP32-S3 DevKit WROOM-1 N16R8 (16MB Flash + 8MB PSRAM): another version this guide coversEdgeHax ESP32-S3 DevKit WROOM-1 N16R8 (16MB Flash + 8MB PSRAM)₹839
YD ESP32-S3-N8R2 Development Board w/ IPEX Block (Solderless): another version this guide coversYD ESP32-S3-N8R2 Development Board w/ IPEX Block (Solderless)₹729
YD ESP32-S3-N8R2 Development Board w/ IPEX Mount & Pre-Soldered Headers: another version this guide coversYD ESP32-S3-N8R2 Development Board w/ IPEX Mount & Pre-Soldered Headers₹759
µEDesign µES3 ESP32-S3 WROOM1 Dev Board w/ 16MB Flash, 8MB PSRAM: another version this guide coversµEDesign µES3 ESP32-S3 WROOM1 Dev Board w/ 16MB Flash, 8MB PSRAM₹720
Vacus ESP32-S3 Development Module w/ Dual USB: another version this guide coversVacus ESP32-S3 Development Module w/ Dual USB₹1,888
Wireless-Tag ESP32-Nano WT9932S3-NANO ESP32-S3R8 DevKit: another version this guide coversWireless-Tag ESP32-Nano WT9932S3-NANO ESP32-S3R8 DevKit₹1,299
LilyGO T7 S3 ESP32-S3 Development Board w/ 16MB Flash & 8MB PSRAM: another version this guide coversLilyGO T7 S3 ESP32-S3 Development Board w/ 16MB Flash & 8MB PSRAM₹1,419
Unexpected Maker FeatherS3 ESP32-S3 Development Board: another version this guide coversUnexpected Maker FeatherS3 ESP32-S3 Development Board₹1,929
Unexpected Maker ProS3 ESP32-S3 Dev Board: another version this guide coversUnexpected Maker ProS3 ESP32-S3 Dev Board₹2,079
Adafruit ESP32-S3 Feather Dev Board w/ STEMMA QT – 8MB Flash: another version this guide coversAdafruit ESP32-S3 Feather Dev Board w/ STEMMA QT – 8MB Flash₹3,149
Adafruit ESP32-S3 Feather 8MB Dev Board w/ w.FL Antenna: another version this guide coversAdafruit ESP32-S3 Feather 8MB Dev Board w/ w.FL Antenna₹3,139
Alternatives and when to choose them
- ESP32-S3 Zero and Mini: the same chip on tiny boards.
- ESP32 DevKit: original ESP32 with Bluetooth Classic.
- ESP32-S3, C3, C6 variants: choosing between chips.
Common mistakes to avoid
- Wiring to GPIO 35 to 37 on octal PSRAM boards.
- Wrong PSRAM mode, so the board reboots.
- Serial output not showing because USB CDC On Boot is off.
- Expecting Bluetooth Classic audio, which the S3 lacks.
Frequently asked questions
What does N16R8 mean?
16 MB flash and 8 MB PSRAM.
Why two USB ports?
One goes through a UART chip, the other to the chip's native USB.
Can it run AI models?
Yes, small ones with ESP-DL, TensorFlow Lite Micro or Edge Impulse.
Does it support Bluetooth audio?
No, only Bluetooth LE.
Which board in Arduino?
ESP32S3 Dev Module.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.





