Component guide · Advanced · 3 min read
ESP32-P4 Boards (Waveshare P4-Pico, P4-ETH, FireBeetle 2 P4)

MIPI Camera and Display
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
The ESP32-P4 is Espressif's high-performance chip: a 400 MHz dual-core RISC-V with 32 MB PSRAM, MIPI CSI camera and DSI display interfaces, H.264 encoding and USB 2.0 high speed. It has no radio of its own, so boards pair it with an ESP32-C6 for Wi-Fi 6 and BLE, or with Ethernet and PoE. It is aimed at video doorbells, HMI panels and camera AI.
Key specs at a glance
- CPU
- Dual-core RISC-V 360 to 400 MHz plus LP core
- Memory
- 768 KB SRAM, 32 MB PSRAM in package, 16 to 32 MB flash
- Video
- MIPI CSI camera, MIPI DSI display, H.264 encoder, JPEG, 2D graphics
- Connectivity
- No built-in radio; ESP32-C6 co-processor over SDIO or Ethernet RMII
- USB
- USB 2.0 high-speed OTG plus full-speed
- Boards
- Waveshare P4-Pico, P4-Core, P4-ETH (PoE), P4-WIFI6-DEV-KIT, DFRobot FireBeetle 2 P4
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Waveshare ESP32-P4-Core Dev Board w/ 32MB PSRAM & Flash₹1,729
Option 2Waveshare ESP32-P4-Pico Development Board w/ Headers₹1,559
Option 3Waveshare ESP32-P4-Pico High-Performance Development Board₹1,379
Option 4Waveshare ESP32-P4-WIFI6-DEV-KIT Development Board₹2,519
Option 5Waveshare ESP32-P4-ETH Dev Board w/ 100Mbps RJ45 Ethernet & PoE₹2,079
Option 6Waveshare ESP32-P4-ETH Development Board w/ Ethernet & Headers₹2,099
What the ESP32-P4 development board is
Wi-Fi on P4 boards goes through the ESP-Hosted firmware on the companion ESP32-C6, so in Arduino the normal WiFi library works once the board package includes hosted support. Ethernet boards use the on-chip MAC with an IP101 PHY.
Arduino-ESP32 3.x supports the P4, but camera and display pipelines are best started from ESP-IDF and the maker's examples.
ESP32-P4 development board pinout
The pins on the ESP32-P4 development board and what each one does.
| Pin | Function |
|---|---|
| MIPI CSI | Camera connector (2-lane) |
| MIPI DSI | Display connector (2-lane) |
| RJ45 | Ethernet (PoE on PoE boards) |
| USB-C | High-speed USB and UART |
| C6 SDIO | Wi-Fi co-processor link (on board) |
| BOOT / RST | Download mode and reset |
- MIPI CSI
- Camera connector (2-lane)
- MIPI DSI
- Display connector (2-lane)
- RJ45
- Ethernet (PoE on PoE boards)
- USB-C
- High-speed USB and UART
- C6 SDIO
- Wi-Fi co-processor link (on board)
- BOOT / RST
- Download mode and reset
Wiring the ESP32-P4 development board
Use the camera and display models the board maker lists; MIPI lane and connector pinouts are not universal. Fit the C6 antenna on Wi-Fi boards.
| ESP32-P4 development board pin | P4 Wi-Fi boards | P4-ETH boards |
|---|---|---|
| Camera | MIPI CSI ribbon | MIPI CSI ribbon |
| Display | MIPI DSI ribbon | MIPI DSI ribbon |
| Network | Wi-Fi via C6 | Ethernet RJ45 |
- Camera
- P4 Wi-Fi boards:
- MIPI CSI ribbon
- P4-ETH boards:
- MIPI CSI ribbon
- Display
- P4 Wi-Fi boards:
- MIPI DSI ribbon
- P4-ETH boards:
- MIPI DSI ribbon
- Network
- P4 Wi-Fi boards:
- Wi-Fi via C6
- P4-ETH boards:
- Ethernet RJ45
Example code
Start from Waveshare's or DFRobot's example repositories for camera, LCD and Ethernet; they include the right board configuration.
# ESP-IDF 5.3 or newer
idf.py set-target esp32p4
idf.py menuconfig # choose camera, display and PSRAM options
idf.py build flash monitor -p COM9Setup and tuning
ESP-IDF 5.3 or newer, or Arduino-ESP32 3.x for simpler projects.
the C6 co-processor needs matching ESP-Hosted firmware; boards ship with it.
use an 802.3af switch or injector with PoE boards.
cameras and displays draw extra current; use a good USB-C supply.
What you need
Shop this list13 of 13 found in our store · ₹92,416
Waveshare ESP32-P4-Core Dev Board w/ 32MB PSRAM & Flash: the part this guide coversWaveshare ESP32-P4-Core Dev Board w/ 32MB PSRAM & Flash₹1,729
Waveshare ESP32-P4-Pico Development Board w/ Headers: another version this guide coversWaveshare ESP32-P4-Pico Development Board w/ Headers₹1,559
Waveshare ESP32-P4-Pico High-Performance Development Board: another version this guide coversWaveshare ESP32-P4-Pico High-Performance Development Board₹1,379
Waveshare ESP32-P4-WIFI6-DEV-KIT Development Board: another version this guide coversWaveshare ESP32-P4-WIFI6-DEV-KIT Development Board₹2,519
Waveshare ESP32-P4-ETH Dev Board w/ 100Mbps RJ45 Ethernet & PoE: another version this guide coversWaveshare ESP32-P4-ETH Dev Board w/ 100Mbps RJ45 Ethernet & PoE₹2,079
Waveshare ESP32-P4-ETH Development Board w/ Ethernet & Headers: another version this guide coversWaveshare ESP32-P4-ETH Development Board w/ Ethernet & Headers₹2,099
Waveshare ESP32-P4-ETH Development Board with 100Mbps RJ45 Ethernet: another version this guide coversWaveshare ESP32-P4-ETH Development Board with 100Mbps RJ45 Ethernet₹1,769
DFRobot FireBeetle 2 ESP32-P4 AI DevKit w/ MIPI CSI/DSI & Wi-Fi 6: another version this guide coversDFRobot FireBeetle 2 ESP32-P4 AI DevKit w/ MIPI CSI/DSI & Wi-Fi 6₹2,799
DFRobot FireBeetle 2 ESP32-P4 AI Vision Board (360MHz RISC-V, MIPI CSI/DSI, Wi-Fi 6): another version this guide coversDFRobot FireBeetle 2 ESP32-P4 AI Vision Board (360MHz RISC-V, MIPI CSI/DSI, Wi-Fi 6)₹2,409
USB Type-C cable 1 m: a data cable for programming (not charge-only)24-Core USB Type-C Cable, 1 m₹500Closest match, check the specs
CAT5E Ethernet LAN cable 1 m: for the Ethernet boardsCAT5E Ethernet LAN Cable, 1 Metre₹120
Raspberry Pi PoE+ injector: PoE power for P4-ETH boardsRaspberry Pi PoE+ Injector₹2,655
ESP32-S3 DevKitC-1 N8R8: a simpler board for Wi-Fi-only tasksKikobot C1 6-Axis Robotic Arm for Education and Research₹70,800
Alternatives and when to choose them
- ESP32-S3 DevKitC: built-in Wi-Fi, lower video performance.
- ESP32 touchscreen boards: ready display boards.
- Raspberry Pi Compute Modules: Linux-class video.
Common mistakes to avoid
- Expecting Wi-Fi without the co-processor firmware.
- Using a camera or display with the wrong MIPI pinout.
- Old ESP-IDF without P4 support.
- Underpowered USB port with camera and display attached.
Frequently asked questions
Does the ESP32-P4 have Wi-Fi?
Not on the chip; boards add an ESP32-C6 for Wi-Fi 6 and BLE.
Can it run Linux?
No, it runs FreeRTOS like other ESP32s.
What resolution can it handle?
Up to 1080p camera input and 1080p H.264 encoding.
Is Arduino supported?
Yes in Arduino-ESP32 3.x, with ESP-IDF recommended for video.
Why PoE?
One cable for power and network on cameras and panels.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

