Buying guide · Beginner · 4 min read
ESP32 Price in India
Which Board to Buy and What It Costs
By Geekobot Learning Team · Updated 16 Nov 2026
On this page
In India a 30 or 38 pin ESP32 DevKit board costs roughly 350 to 650 rupees in 2026, and a small ESP32-C3 SuperMini costs about 250 to 400 rupees. ESP32-S3 boards with extra memory and AI features cost more. Pick the 38-pin WROOM board for general projects, the C3 SuperMini for tiny Wi-Fi sensors and the S3 for cameras, displays and AI voice.
Key specs at a glance
- ESP32 DevKit (WROOM, 30 or 38 pin)
- About Rs 350 to 650 (2026)
- ESP32-C3 SuperMini
- About Rs 250 to 400
- ESP32-S3 boards
- Rs 500 and up, depending on memory and screen
- ESP32-CAM
- Camera module board, often under Rs 800
- Logic level
- 3.3 V on every board
- Wireless
- Wi-Fi 2.4 GHz, Bluetooth or BLE depending on chip
How much an ESP32 costs in India
ESP32 boards are cheap, and the price mostly depends on which ESP32 chip is on the board and what else is built in.
roughly Rs 350 to 650. This is the standard board in most tutorials.
roughly Rs 250 to 400. Smaller, newer RISC-V chip with Wi-Fi and Bluetooth 5 (BLE).
from about Rs 500 and rising with extra memory (N16R8), a screen or microphones for AI voice projects.
a camera module with an OV2640 sensor, usually under Rs 800 with a programming base.
These are rounded market ranges as of November 2026; shops change them often. The cards at the bottom of this page show Geekobot's price today.
Which ESP32 board for which project
The table shows what you are paying for in each type of board.
| Board | Typical price | Chip | Best for |
|---|---|---|---|
| ESP32 DevKit 38-pin | About Rs 350 to 650 | ESP32-WROOM-32, dual core 240 MHz | General Wi-Fi and Bluetooth projects, most tutorials |
| ESP32-C3 SuperMini | About Rs 250 to 400 | ESP32-C3, RISC-V 160 MHz | Tiny battery-powered Wi-Fi sensors |
| ESP32-S3 board | From about Rs 500 | ESP32-S3, dual core 240 MHz, more RAM | Cameras, displays, AI voice, USB devices |
| ESP32-CAM | Often under Rs 800 | ESP32 with OV2640 camera | Wi-Fi camera and snapshot projects |
- ESP32 DevKit 38-pin
- Typical price:
- About Rs 350 to 650
- Chip:
- ESP32-WROOM-32, dual core 240 MHz
- Best for:
- General Wi-Fi and Bluetooth projects, most tutorials
- ESP32-C3 SuperMini
- Typical price:
- About Rs 250 to 400
- Chip:
- ESP32-C3, RISC-V 160 MHz
- Best for:
- Tiny battery-powered Wi-Fi sensors
- ESP32-S3 board
- Typical price:
- From about Rs 500
- Chip:
- ESP32-S3, dual core 240 MHz, more RAM
- Best for:
- Cameras, displays, AI voice, USB devices
- ESP32-CAM
- Typical price:
- Often under Rs 800
- Chip:
- ESP32 with OV2640 camera
- Best for:
- Wi-Fi camera and snapshot projects
What to check before you buy
- 1The exact chip name: ESP32-WROOM-32, ESP32-C3 and ESP32-S3 are different chips. A title that only says ESP32 can hide an older or smaller one.
- 2Pin count and width: a 38-pin board is wider and may not leave room on a standard breadboard; a 30-pin one is narrower.
- 3The USB chip and connector: CH340, CP2102 or built-in USB, and Micro-USB or Type-C. Check that your cable matches.
- 4Flash and PSRAM: 4 MB flash is enough for most projects. Cameras, displays and audio benefit from PSRAM.
- 5Headers: some boards are unsoldered. Confirm whether you need to solder header pins yourself.
One thing that costs more than the board
Every ESP32 works at 3.3 V and its pins are not 5 V tolerant, so many 5 V sensors and modules need a logic level shifter or a resistor divider. Plan for that small extra cost, and for a good USB cable, because a weak one makes the board reset when Wi-Fi starts. The ESP32 vs Arduino Uno guide explains the other differences.
Your first ESP32 purchase
A 38-pin ESP32 DevKit, a breadboard, jumper wires and a few sensors are enough for the beginner projects in the Top 10 ESP32 projects for beginners. If you only want a tiny Wi-Fi sensor node later, add a C3 SuperMini, and if you want a camera or a screen, look at the S3 and ESP32-CAM boards.
Common mistakes to avoid
- Buying a board without checking which ESP32 chip it uses.
- Connecting 5 V sensor outputs straight to the 3.3 V pins.
- Ordering a 38-pin board for a small breadboard and finding no room for wires.
- Powering the board from a weak USB cable.
- Not checking whether header pins are soldered.
Frequently asked questions
What is the price of an ESP32 in India?
In 2026 an ESP32 DevKit costs roughly Rs 350 to 650, an ESP32-C3 SuperMini roughly Rs 250 to 400 and ESP32-S3 boards from about Rs 500. Prices change, so check the product page.
Which ESP32 board should a beginner buy?
A 38-pin ESP32 DevKit (ESP32-WROOM-32) is the safe choice because most tutorials and libraries use it. Choose the C3 SuperMini only for very small projects.
Is ESP32 cheaper than Arduino?
They cost about the same: an ESP32 DevKit is close in price to a compatible Arduino Uno but adds Wi-Fi, Bluetooth, much more memory and a faster processor.
What is the difference between ESP32, ESP32-C3 and ESP32-S3?
ESP32 (WROOM) is the classic dual-core board. The C3 is a smaller, cheaper single-core RISC-V chip. The S3 is dual core with more memory and extra features for cameras, displays and AI.
Can I use an ESP32 with the Arduino IDE?
Yes. Install the ESP32 board package in the Boards Manager and upload sketches as you would for an Uno. See the ESP32 vs Arduino Uno guide for the pin and voltage differences.
Does an ESP32 board come with a USB cable?
Usually not. Check the listing, and check whether the board uses Micro-USB or Type-C so you buy the right cable.
Parts for this guide
Terms in this guide
Projects that use it
Put this into practice: 7 step-by-step builds in our project library use parts from this guide.
Keep learning
Sources
- ESP32 Series Datasheet (Espressif Systems)
- ESP32-C3 Series Datasheet (Espressif Systems)
- ESP32-S3 Series Datasheet (Espressif Systems)
- Indian online electronics shop listings, November 2026 (price ranges)
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.




