Shop by category
Shop all components
Wi-Fi Modules & Development Boards · Generic
The ESP32-C3 SuperMini Development Board is a compact, RISC-V-based IoT platform featuring integrated WiFi (802.11 b/g/n) and Bluetooth 5.0 LE, programmable via Arduino IDE or ESP-IDF, and powered via Micro USB or a 3.3V-6V external supply.
📖Guide for this partESP32-C3 Boards→Buy 10 or more to pay ₹255.55 each
Business and institution accounts get extra tier pricing. Sign in for 100+ pieces.
Ships in 2-4 weeks
We source this item for your order. It is dispatched within 2 to 4 weeks; if we cannot get it, we cancel it and refund you in full. Prepaid only.
Parts you need to use it, or that are built with it in our projects.




Overview
The ESP32-C3 SuperMini Development Board leverages the Espressif ESP32-C3 RISC-V processor to deliver a powerful yet power-efficient foundation for wireless IoT applications. Its integrated 2.4GHz WiFi and Bluetooth 5.0 transceiver supports a wide range of network protocols, from HTTP/MQTT for cloud connectivity to BLE for local device communication, making it suitable for smart home automation, wearable tech, and industrial telemetry.
Engineered for low-power operation, the board features advanced sleep modes, drawing only ~43µA in deep sleep, enabling long-term deployments on battery or solar power. The compact form factor houses a full suite of interfaces, including multiple GPIOs with PWM, analog inputs, and serial buses, all accessible via pre-soldered header pins. The design includes support for an external antenna to enhance wireless range in challenging environments.
Good for
Category
Wi-Fi Modules & Development BoardsSKU
GB-IOWC-1032
| Brand / part no. | Generic |
|---|---|
| ROM | 384 KB |
| GPIO | 11x Digital (PWM), 4x Analog (ADC) |
| SRAM | 400 KB |
| Category | Wi-Fi Modules & Development Boards |
| Interfaces | 2x UART, 1x SPI, 1x I2C, Micro USB |
| Flash Memory | 4 MB |
| Supply Voltage | 3.3V - 6V (External), 5V (USB) |
| Frequency Range | 2.4GHz ISM Band |
| Antenna Connector | External antenna support (via connector) |
| Operating Current | Up to 100 mA (Max) |
| Deep Sleep Current | ~43 µA |
| Dimensions (L x W) | 25 mm x 22 mm |
| Wireless Protocols | WiFi 802.11 b/g/n, Bluetooth 5.0 LE |
| Microcontroller / SoC | ESP32-C3 (RISC-V 32-bit, up to 160MHz) |
| Operating Temperature | -40°C to +85°C |
Typical values from the manufacturer's datasheet. Confirm the exact variant before you build a product around it.
| 5V | USB 5 V in/out |
|---|---|
| GND | Ground |
| 3V3 | 3.3 V out from regulator |
| GPIO0–4 | Digital / ADC |
| GPIO5–7 | Digital, SPI capable |
| GPIO8 | On-board LED, strapping pin |
| GPIO9 | BOOT button, strapping pin |
| GPIO10 | Digital |
| GPIO20 | UART RX |
| GPIO21 | UART TX |
Typical pin names. Boards from different makers can differ, so check the print on your module.
Library: Arduino-ESP32 core or ESP-IDF
// Blink the on-board LED and print Wi-Fi status
#include <WiFi.h>
void setup() {
Serial.begin(115200);
pinMode(8, OUTPUT);
WiFi.begin("your-ssid", "your-password");
}
void loop() {
digitalWrite(8, !digitalRead(8));
Serial.println(WiFi.status() == WL_CONNECTED ? WiFi.localIP().toString() : "connecting…");
delay(1000);
}Used in 249 of our project guides, with wiring and code.
ROM: 384 KB; GPIO: 11x Digital (PWM), 4x Analog (ADC); SRAM: 400 KB; Category: Wi-Fi Modules & Development Boards; Interfaces: 2x UART, 1x SPI, 1x I2C, Micro USB; Flash Memory: 4 MB. The full list is under Specifications.
5V: USB 5 V in/out; GND: Ground; 3V3: 3.3 V out from regulator; GPIO0–4: Digital / ADC; GPIO5–7: Digital, SPI capable; GPIO8: On-board LED, strapping pin; GPIO9: BOOT button, strapping pin; GPIO10: Digital. These are the typical pin names shown under Pinout & wiring. Boards from different makers can differ, so check the print on your module.
Arduino-ESP32 core or ESP-IDF. You can copy the example code from this page.
It is used in 249 Geekobot projects, including Wi-Fi plant monitor with pump control, Wi-Fi garage gas monitor and Wi-Fi garage gas and fumes monitor. Each project has the parts list, wiring and code.
Yes. Prices include GST and every order comes with a GST invoice. Add your GSTIN at checkout and we put it on the invoice for input credit.
Delivery is a flat ₹80 anywhere in India, and free on orders over ₹999. We ship from our Bengaluru and Guwahati warehouses, whichever is nearer to you, and the product page shows an estimated delivery date for your PIN code.
Yes, on eligible PIN codes for orders up to ₹5,000. A ₹150 COD charge is added at checkout, and checkout shows whether COD is available for your order. You can also pay by UPI, card or net banking.
Yes, if it arrives damaged, defective or is not what you ordered: tell us within 7 days of delivery and we collect it free and send a replacement or a full refund. We do not take back parts that are not faulty, so check the specs or ask us before you order. You can cancel for free until the order is dispatched.
Yes. The price per unit drops automatically at higher quantities, as shown in the price tiers above. For 100+ pieces or a purchase order, ask for a bulk quote.
Check the specifications for voltage and interface, or ask Geeko AI. It can suggest compatible boards and wiring.
Guides for this part and its category.

₹44.00
Incl. GST
₹249.00
Incl. GST
₹892.00
Incl. GST
₹2,249.00
Incl. GST5.0 out of 5 from 1 review
Parash B.·
Its working and delivery also very fast.