Component guide · Beginner · 3 min read
Gas Leak Detectors and Alarms

CO Alarm with LCD, Tuya Wi-Fi Natural Gas Sensor, Mastech MS6310 and Renke 4-Gas Detector
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are finished gas detectors, not modules. The CO alarm with LCD sounds an 85 dB alarm when carbon monoxide builds up. The Tuya natural gas sensor plugs into mains and alerts your phone. The Mastech MS6310 is a handheld probe for finding leaks in pipes and fittings, and the Renke detector measures methane, oxygen and carbon monoxide for people entering tanks and pits.
Key specs at a glance
- CO alarm
- Electrochemical CO, LCD ppm display, 85 dB
- Tuya sensor
- Natural gas (CH4), Wi-Fi 2.4 GHz, mains powered
- MS6310
- Combustible gas, flexible probe, audible ticking
- Renke multi-gas
- CH4, O2, CO; portable, rechargeable
- Testing
- Test button on alarms
- Use
- Homes, kitchens, workshops, confined spaces
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1CO Gas Sensor Alarm Detector with LCD Display – 85dB Audible Alarm₹549
Option 2PST RQ400A Tuya Smart WiFi Natural Gas (CH4) Sensor₹1,209
Option 3Mastech MS6310 Combustible Gas Analysis Apparatus – Portable Gas Leak Detector₹7,169
Option 4Renke RS-MG41 All-in-One Gas Detector (Methane-Oxygen-Carbon Monoxide) – Portable Industrial Unit₹11,189
What the Gas leak detectors and alarms is
Gas leak detectors and alarms sense LPG, methane or carbon monoxide and sound an alarm, from simple MQ sensor modules to ready-made household alarms with relay outputs.
Mount CO alarms at breathing height in bedrooms and near fuel-burning appliances. Mount natural gas alarms near the ceiling and LPG alarms near the floor.
A handheld leak finder points to the leak; a fixed alarm warns people. Use both where gas is piped.
Gas leak detectors and alarms pinout
The pins on the Gas leak detectors and alarms and what each one does.
| Pin | Function |
|---|---|
| Test button | Check the siren monthly |
| Power | Battery or mains |
| App (Tuya) | Smart Life pairing |
- Test button
- Check the siren monthly
- Power
- Battery or mains
- App (Tuya)
- Smart Life pairing
Wiring the Gas leak detectors and alarms
Connect the Gas leak detectors and alarms like this.
| Gas leak detectors and alarms pin | Home | Workshop or plant |
|---|---|---|
| CO alarm | Wall at breathing height | Near gas geyser or generator room |
| Tuya CH4 sensor | High on the kitchen wall | Same |
| Leak finder | Run the probe along joints | Same |
- CO alarm
- Home:
- Wall at breathing height
- Workshop or plant:
- Near gas geyser or generator room
- Tuya CH4 sensor
- Home:
- High on the kitchen wall
- Workshop or plant:
- Same
- Leak finder
- Home:
- Run the probe along joints
- Workshop or plant:
- Same
Example code
A minimal sketch to check the part works.
1. Ventilate the area. No flames or switching of lights.
2. Power on the MS6310 in clean air and wait for it to settle.
3. Move the probe slowly along each joint, valve and regulator.
4. Faster ticking or a higher bar means gas; confirm with soapy water.
5. Close the supply and repair the joint before re-testing.Setup and tuning
mount LPG detectors low, near the floor, because LPG is heavier than air; mount methane detectors high.
use the stated supply; mains-powered units must be wired by a qualified person.
use the relay to close a gas solenoid valve or run an exhaust fan.
press the test button monthly; never test with an open flame.
use a certified alarm for life safety, not a DIY module alone.
What you need
Shop this list6 of 6 found in our store · ₹23,334
Generic CO Gas Sensor Alarm Detector with LCD Display – 85dB Audible Alarm: the part this guide coversCO Gas Sensor Alarm Detector with LCD Display – 85dB Audible Alarm₹549
PST RQ400A Tuya Smart WiFi Natural Gas (CH4) Sensor: another version this guide coversPST RQ400A Tuya Smart WiFi Natural Gas (CH4) Sensor₹1,209
Mastech MS6310 Combustible Gas Analysis Apparatus – Portable Gas Leak Detector: another version this guide coversMastech MS6310 Combustible Gas Analysis Apparatus – Portable Gas Leak Detector₹7,169
Renke RS-MG41 All-in-One Gas Detector (Methane-Oxygen-Carbon Monoxide) – Portable Industrial Unit: another version this guide coversRenke RS-MG41 All-in-One Gas Detector (Methane-Oxygen-Carbon Monoxide) – Portable Industrial Unit₹11,189
Sonoff ZBDongle-E Zigbee 3.0 USB dongle: to add smart alarms to Home AssistantSonoff ZBDongle-E Zigbee 3.0 USB Dongle Plus₹3,041Closest match, check the specs
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Alternatives and when to choose them
- MQ-6 and MQ-8 sensors: DIY alarms.
- MQ-7 CO sensor: DIY CO detection.
- Catalytic combustible sensors: LEL measurement.
Common mistakes to avoid
- Mounting an LPG detector near the ceiling.
- Relying on a DIY module as the only safety alarm.
- Testing with an open flame.
- Placing it right above the stove.
Frequently asked questions
Where should I mount an LPG gas detector?
Low on the wall, about 30 cm above the floor, because LPG sinks.
Can I build a gas alarm with an MQ-5 module?
Yes for learning, but use a certified alarm to protect people.
Can the alarm shut off the gas supply?
Yes, if it has a relay output wired to a gas solenoid valve.
How do I test the detector safely?
Use the test button or a test gas; never use a lighter flame.
Why does the alarm sound when cooking?
Steam, alcohol or smoke can trigger cheap sensors; move it away from the stove.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
