Component guide · Intermediate · 3 min read
Monochrome Graphic LCD Modules

128x64 ST7920 and KS0108, JHD12864 and JHD Series, GoldenMorning ST7565R and UC1698U, 128x48 and 12864B Displays
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Monochrome graphic LCDs are cheap, readable in sunlight and need no backlight power if you accept the plain look. Most are 128x64 with an ST7920 (serial or parallel) or KS0108 (parallel) controller; others use ST7565R or UC1698U. Choose by controller, interface and backlight colour, then use the matching U8g2 constructor.
Key specs at a glance
- Resolution
- 128x48, 128x64 and 160x160
- Controllers
- ST7920, KS0108, ST7565R, UC1698U
- Interface
- Serial (SPI-like), 8-bit parallel by model
- Backlight
- Blue, white, yellow-green
- Supply
- 5 V, some 3.3 V
- Use
- Menus, graphs and industrial panels
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1128×48 Graphic LCD (Green)₹968
Option 2128×64 Graphic LCD (ST7920 / KS0108)₹496
Option 3GoldenMorning 128×64 Graphic LCD Display ST7565R GM12864T-5D₹1,033
Option 4GoldenMorning 1.3 inch OLED 128×64 CH1116G GMT12864-72₹377
Option 5GoldenMorning 1.54 inch OLED 128×64 SSD1309/SPD0301 GME12864-90₹834
Option 6GoldenMorning 1.3 inch OLED Display Module 128×64 CH1116 GME12864-89-SPI-B₹436
What the Monochrome graphic LCD modules (128x64 ST7920, KS0108, JHD and GoldenMorning) is
These LCDs are rows of black dots on a coloured backlight. The ST7920 module can be driven over a 3-wire serial mode that uses fewer pins, while KS0108 needs many pins in parallel. ST7565R modules are SPI and run at 3.3 V. JHD modules are a widely used series with different controllers and backlights; read the listing for yours.
The U8g2 library supports all of these with different constructors, so choose the constructor from the controller name.
Monochrome graphic LCD modules (128x64 ST7920, KS0108, JHD and GoldenMorning) pinout
The pins on the Monochrome graphic LCD modules (128x64 ST7920, KS0108, JHD and GoldenMorning) and what each one does.
| Pin | Function |
|---|---|
| RS / CS | Chip select or register select |
| R/W / SID | Data in (serial mode) |
| E / SCLK | Clock |
| PSB | Serial or parallel mode select |
| BLA / BLK | Backlight supply |
- RS / CS
- Chip select or register select
- R/W / SID
- Data in (serial mode)
- E / SCLK
- Clock
- PSB
- Serial or parallel mode select
- BLA / BLK
- Backlight supply
Wiring the Monochrome graphic LCD modules (128x64 ST7920, KS0108, JHD and GoldenMorning)
How the Monochrome graphic LCD modules (128x64 ST7920, KS0108, JHD and GoldenMorning) fits and connects.
| Monochrome graphic LCD modules (128x64 ST7920, KS0108, JHD and GoldenMorning) pin | Fits or connects to | Note |
|---|---|---|
| VCC and GND | 5 V and GND | Check if your module is 3.3 V |
| E / SCLK | D13 | Serial clock |
| R/W / SID | D11 | Serial data |
| RS / CS | D10 | Chip select |
| PSB | GND | Selects serial mode on ST7920 |
- VCC and GND
- Fits or connects to:
- 5 V and GND
- Note:
- Check if your module is 3.3 V
- E / SCLK
- Fits or connects to:
- D13
- Note:
- Serial clock
- R/W / SID
- Fits or connects to:
- D11
- Note:
- Serial data
- RS / CS
- Fits or connects to:
- D10
- Note:
- Chip select
- PSB
- Fits or connects to:
- GND
- Note:
- Selects serial mode on ST7920
Example code
A short order of work that suits this family.
1. Tie PSB to GND to select serial mode.
2. Connect E, R/W and RS to clock, data and chip select pins.
3. Install the U8g2 library and choose the ST7920 serial constructor.
4. Call u8g2.begin() and draw text.
5. Adjust the contrast with the pot on the module, then wire the backlight through a resistor.Setup and tuning
ST7920 needs PSB low for serial; high for parallel.
set it with the contrast pot or a resistor; poor contrast is the commonest problem.
use the series resistor shown for the module.
U8g2 constructors are named by controller and interface.
What you need
Shop this list13 of 13 found in our store · ₹11,616
128×48 Graphic LCD (Green): the part this guide covers128×48 Graphic LCD (Green)₹968
128×64 Graphic LCD (ST7920 / KS0108): another version this guide covers128×64 Graphic LCD (ST7920 / KS0108)₹496
GoldenMorning 128×64 Graphic LCD Display ST7565R GM12864T-5D: another version this guide coversGoldenMorning 128×64 Graphic LCD Display ST7565R GM12864T-5D₹1,033
GoldenMorning 1.3 inch OLED 128×64 CH1116G GMT12864-72: another version this guide coversGoldenMorning 1.3 inch OLED 128×64 CH1116G GMT12864-72₹377
GoldenMorning 1.54 inch OLED 128×64 SSD1309/SPD0301 GME12864-90: another version this guide coversGoldenMorning 1.54 inch OLED 128×64 SSD1309/SPD0301 GME12864-90₹834
GoldenMorning 1.3 inch OLED Display Module 128×64 CH1116 GME12864-89-SPI-B: another version this guide coversGoldenMorning 1.3 inch OLED Display Module 128×64 CH1116 GME12864-89-SPI-B₹436
12864B Graphic Blue Color Backlight LCD Display Module: another version this guide covers12864B Graphic Blue Color Backlight LCD Display Module₹516
Original JHD12864C 128×64 dots LCD Display with Yellow Green Backlight: another version this guide coversOriginal JHD12864C 128×64 dots LCD Display with Yellow Green Backlight₹1,252
Original JHD529 128×64 dots LCD Display with Yellow Green Backlight: another version this guide coversOriginal JHD529 128×64 dots LCD Display with Yellow Green Backlight₹1,322
Original JHD622 128×64 dots LCD Display with Yellow Green Backlight: another version this guide coversOriginal JHD622 128×64 dots LCD Display with Yellow Green Backlight₹1,003
Original JHD754 128 x 64 dots LCD Display with White Backlight: another version this guide coversOriginal JHD754 128 x 64 dots LCD Display with White Backlight₹735
Golden Morning 160×160 Graphic LCD Display UC1698U GM160160-03C2 Black On Grey: another version this guide coversGolden Morning 160×160 Graphic LCD Display UC1698U GM160160-03C2 Black On Grey₹1,491
Original JHD756 128 x 64 dots LCD Display with White Backlight: another version this guide coversOriginal JHD756 128 x 64 dots LCD Display with White Backlight₹1,153
Alternatives and when to choose them
- Graphic LCD 12864: detailed 12864 guide.
- Small I2C OLEDs: brighter graphics.
- Nokia 5110 LCD: smaller SPI option.
Common mistakes to avoid
- Leaving PSB floating on ST7920 modules.
- Driving the backlight without a resistor.
- Choosing the wrong U8g2 constructor.
- Ignoring the contrast adjustment.
Frequently asked questions
Which pins do I need for an ST7920?
In serial mode you need E, R/W, RS, VCC, GND and PSB tied low.
What library do I use?
U8g2 supports ST7920, KS0108, ST7565 and UC1698U controllers.
Do these need a backlight resistor?
Yes, use the series resistor shown for the module.
Are they readable in sunlight?
Yes, reflective LCDs read well in bright light.
Why is the screen blank?
Check PSB, contrast and the correct constructor.
Parts for this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
