Component guide · Advanced · 5 min read
Industrial Pressure

Sensata PTE7100 and PTE7300 Transmitters, Honeywell GPT 250 bar, Renke RS485 Differential and Asair Vacuum Gauge
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are sealed, threaded pressure transmitters for hydraulics, compressors, pumps and process plants. The Sensata PTE7100 and PTE7300 cover 10 to 200 bar with hermetic steel housings and analog voltage or current outputs; the Honeywell GPT reads to 250 bar at IP69K; the Renke unit shows differential pressure on an LCD and sends it over RS485; and the Asair AGP1013 measures vacuum.
Key specs at a glance
- Range
- 10 to 200 bar (Sensata), 250 bar (Honeywell GPT), ±10 kPa (Renke), vacuum (Asair)
- Output
- 0.5 to 4.5 V ratiometric, 1 to 5 V, 4 to 20 mA, or RS485 Modbus
- Supply
- 5 V (ratiometric) or 8 to 30 V (current and RS485)
- Thread
- G1/4, 1/4 NPT and others
- Protection
- IP65 to IP69K
- Accuracy
- About ±0.25 to 1% FS
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Sensata Technologies PTE7100-11AC-1A010BN Pressure Transmitter, Hermetic, Gauge, 0-10 bar, G1/4A BSPP, Metri-Pack 150₹9,489
Option 2Sensata Technologies PTE7100-11AC-1A025BN Pressure Transmitter, Hermetic Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150₹10,229
Option 3Sensata Technologies PTE7100-12AC-1B025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150₹9,699
Option 4Sensata Technologies PTE7100-13AC-1E025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150₹10,229
Option 5Sensata Technologies PTE7100-21AC-1A040BN Pressure Transmitter, Hermetic, Gauge, 0-40 bar, G1/4A BSPP, Metri-Pack 150₹10,229
Option 6Sensata Technologies PTE7100-21AC-1A050BN Pressure Transmitter, Gauge, 0-50 bar, BSPP G1/4A Port, Metri-Pack 150 Connector₹17,249
What the Sensata PTE7100 and PTE7300 and industrial pressure transmitters is
Industrial pressure transmitters from Sensata and similar brands measure liquid and gas pressure in pipes, tanks and hydraulics, giving 4 to 20 mA, 0.5 to 4.5 V or 0 to 10 V outputs.
The part code tells the range, thread and output; check it before wiring. A 0.5 to 4.5 V transducer connects like a small sensor, while a 4 to 20 mA one needs a loop supply and a shunt resistor.
Fit with thread sealant on parallel threads only where the seal is a bonded washer; follow the plumbing standard for your system.
Sensata PTE7100 and PTE7300 and industrial pressure transmitters pinout
The pins on the Sensata PTE7100 and PTE7300 and industrial pressure transmitters and what each one does.
| Pin | Function |
|---|---|
| +V | Supply |
| GND / 0 V | Ground |
| OUT / Signal | Voltage output |
| Loop +/- | 4 to 20 mA versions |
| A / B | RS485 (Renke) |
- +V
- Supply
- GND / 0 V
- Ground
- OUT / Signal
- Voltage output
- Loop +/-
- 4 to 20 mA versions
- A / B
- RS485 (Renke)
Wiring the Sensata PTE7100 and PTE7300 and industrial pressure transmitters
Connect the Sensata PTE7100 and PTE7300 and industrial pressure transmitters like this.
| Sensata PTE7100 and PTE7300 and industrial pressure transmitters pin | Arduino Uno | ESP32 |
|---|---|---|
| +V (5 V ratiometric) | 5 V | 5 V |
| GND | GND | GND |
| OUT (0.5 to 4.5 V) | A0 | GPIO 34 via 10k/20k divider |
| 4 to 20 mA loop | 24 V + to sensor, sensor - to 250 ohm to GND, read across 250 ohm | Same, with 150 ohm for 3.3 V |
- +V (5 V ratiometric)
- Arduino Uno:
- 5 V
- ESP32:
- 5 V
- GND
- Arduino Uno:
- GND
- ESP32:
- GND
- OUT (0.5 to 4.5 V)
- Arduino Uno:
- A0
- ESP32:
- GPIO 34 via 10k/20k divider
- 4 to 20 mA loop
- Arduino Uno:
- 24 V + to sensor, sensor - to 250 ohm to GND, read across 250 ohm
- ESP32:
- Same, with 150 ohm for 3.3 V
Example code
For 4 to 20 mA: current = V / shunt; bar = (mA - 4) / 16 x range. Use the Modbus guide for the Renke unit.
const int PIN = A0;
const float FULL_BAR = 25.0; // your transmitter's range
void setup() { Serial.begin(115200); }
void loop() {
float v = analogRead(PIN) * 5.0 / 1023.0;
float bar = (v - 0.5) / 4.0 * FULL_BAR;
if (bar < 0) bar = 0;
Serial.print(v, 3); Serial.print(" V "); Serial.print(bar, 2); Serial.println(" bar");
delay(500);
}Setup and tuning
pick a range about 1.5 times your normal working pressure.
4 to 20 mA is best for long cables; 0.5 to 4.5 V suits short runs to microcontrollers.
use a 165 Ω resistor for 0.66 to 3.3 V, or a 250 Ω resistor for 1 to 5 V.
match the port thread (G1/4, NPT) and use sealant tape or a bonded seal.
check compatibility with your fluid, such as water, oil or refrigerant.
What you need
Shop this list20 of 20 found in our store · ₹1,64,928
Sensata Technologies PTE7100-11AC-1A010BN Pressure Transmitter, Hermetic, Gauge, 0-10 bar, G1/4A BSPP, Metri-Pack 150: the part this guide coversSensata Technologies PTE7100-11AC-1A010BN Pressure Transmitter, Hermetic, Gauge, 0-10 bar, G1/4A BSPP, Metri-Pack 150₹9,489
Sensata Technologies PTE7100-11AC-1A025BN Pressure Transmitter, Hermetic Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150: another version this guide coversSensata Technologies PTE7100-11AC-1A025BN Pressure Transmitter, Hermetic Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150₹10,229
Sensata Technologies PTE7100-12AC-1B025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150: another version this guide coversSensata Technologies PTE7100-12AC-1B025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150₹9,699
Sensata Technologies PTE7100-13AC-1E025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150: another version this guide coversSensata Technologies PTE7100-13AC-1E025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150₹10,229
Sensata Technologies PTE7100-21AC-1A040BN Pressure Transmitter, Hermetic, Gauge, 0-40 bar, G1/4A BSPP, Metri-Pack 150: another version this guide coversSensata Technologies PTE7100-21AC-1A040BN Pressure Transmitter, Hermetic, Gauge, 0-40 bar, G1/4A BSPP, Metri-Pack 150₹10,229
Sensata Technologies PTE7100-21AC-1A050BN Pressure Transmitter, Gauge, 0-50 bar, BSPP G1/4A Port, Metri-Pack 150 Connector: another version this guide coversSensata Technologies PTE7100-21AC-1A050BN Pressure Transmitter, Gauge, 0-50 bar, BSPP G1/4A Port, Metri-Pack 150 Connector₹17,249
Sensata Technologies PTE7300-14AM-1B025SN Pressure Transmitter, Hermetic Sealed Gauge, 0-25 bar, G1/4A BSPP, M12 Connector: another version this guide coversSensata Technologies PTE7300-14AM-1B025SN Pressure Transmitter, Hermetic Sealed Gauge, 0-25 bar, G1/4A BSPP, M12 Connector₹11,089
Sensata Technologies PTE7300-14AN-1B010BN Pressure Transmitter, Hermetic, Gauge, BSPP, 0-10 bar, G1/4A: another version this guide coversSensata Technologies PTE7300-14AN-1B010BN Pressure Transmitter, Hermetic, Gauge, BSPP, 0-10 bar, G1/4A₹8,029
Sensata Technologies PTE7300-14AN-1B025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP Port: another version this guide coversSensata Technologies PTE7300-14AN-1B025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP Port₹7,539
Sensata Technologies PTE7300-24AN-1B050BN Pressure Transmitter, Gauge, 0-50 bar, BSPP G1/4A, Digital I2C: another version this guide coversSensata Technologies PTE7300-24AN-1B050BN Pressure Transmitter, Gauge, 0-50 bar, BSPP G1/4A, Digital I2C₹11,969
Sensata Technologies PTE7300-24DM-0B050SN Pressure Transmitter, Sealed Gauge, 0-50 bar, 1/4″-18 NPTF, 5-Pin M12 Connector: another version this guide coversSensata Technologies PTE7300-24DM-0B050SN Pressure Transmitter, Sealed Gauge, 0-50 bar, 1/4″-18 NPTF, 5-Pin M12 Connector₹12,779
Sensata Technologies PTE7300-24DM-0B100SN Pressure Transmitter, Sealed Gauge, 0-100 bar, NPTF, 5-Pin M12 Connector: another version this guide coversSensata Technologies PTE7300-24DM-0B100SN Pressure Transmitter, Sealed Gauge, 0-100 bar, NPTF, 5-Pin M12 Connector₹12,789
Sensata Technologies PTE7300-34DM-0B200SN Pressure Transmitter, Sealed Gauge, 0-200 bar, 1/4″-18 NPTF, 5-Pin M12 Connector: another version this guide coversSensata Technologies PTE7300-34DM-0B200SN Pressure Transmitter, Sealed Gauge, 0-200 bar, 1/4″-18 NPTF, 5-Pin M12 Connector₹10,129
Honeywell GPTBG3YG250BSBFX250K Pressure Sensor, 250bar, Stainless Steel Housing, IP69K: another version this guide coversHoneywell GPTBG3YG250BSBFX250K Pressure Sensor, 250bar, Stainless Steel Housing, IP69K₹11,549
Renke RS-YC-N01-2D Differential Pressure Sensor -10kPa~10kPa with LCD Display & Keypad – RS485 Modbus: another version this guide coversRenke RS-YC-N01-2D Differential Pressure Sensor -10kPa~10kPa with LCD Display & Keypad – RS485 Modbus₹3,689
Asair AGP1013 Piezoresistive Vacuum Gauge, 0~1000T, KF16 Connector: another version this guide coversAsair AGP1013 Piezoresistive Vacuum Gauge, 0~1000T, KF16 Connector₹6,519
Stainless steel pressure transducer 0.5 to 4.5 V (1 MPa): a low-cost threaded transducer0.5MPa Stainless Steel Pressure Transducer Sensor – G1/4 Thread, 0.5-4.5V Output₹1,199Closest match, check the specs
ADS1115 16-bit 4-channel ADC module: for more precise analog readingsADS1115 16-Bit 4-Channel ADC Module₹199
MAX485 RS-485 to TTL module: to read RS485 versions from a microcontrollerMAX485 RS-485 to TTL Module₹28
SMPS power supply in metal enclosure (5/12/24 V): a 12 V or 24 V supplySMPS Power Supply, Metal Enclosure (5V / 12V / 24V)₹298Closest match, check the specs
Alternatives and when to choose them
- 0.5 to 4.5 V transducers: low-cost threaded sensors.
- 4 to 20 mA transmitters: loop-powered.
- Modbus with ESP32: reading RS485 units.
Common mistakes to avoid
- Choosing a range too close to working pressure.
- Reading 5 V output on a 3.3 V ADC.
- Using the wrong thread seal.
- Ignoring pressure surges.
Frequently asked questions
How do I read a 4 to 20 mA transmitter with Arduino?
Put a 250 Ω resistor in the loop and read 1 to 5 V on an analog pin.
What pressure range should I choose?
About 1.5 times the normal pressure, below the burst rating.
Why does it read 4 mA at zero pressure?
That is normal; 4 mA is zero, 20 mA is full scale.
Can I use it with water and oil?
Check the media compatibility of the sensor diaphragm.
What causes reading spikes?
Pressure surges or noisy wiring; add a snubber and shielded cable.
Parts for this guide
Sensata Technologies PTE7100-11AC-1A010BN Pressure Transmitter, Hermetic, Gauge, 0-10 bar, G1/4A BSPP, Metri-Pack 150₹9,489View
Sensata Technologies PTE7100-11AC-1A025BN Pressure Transmitter, Hermetic Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150₹10,229View
Sensata Technologies PTE7100-12AC-1B025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150₹9,699View
Sensata Technologies PTE7100-13AC-1E025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP, Metri-Pack 150₹10,229View
Sensata Technologies PTE7100-21AC-1A040BN Pressure Transmitter, Hermetic, Gauge, 0-40 bar, G1/4A BSPP, Metri-Pack 150₹10,229View
Sensata Technologies PTE7100-21AC-1A050BN Pressure Transmitter, Gauge, 0-50 bar, BSPP G1/4A Port, Metri-Pack 150 Connector₹17,249View
Sensata Technologies PTE7300-14AM-1B025SN Pressure Transmitter, Hermetic Sealed Gauge, 0-25 bar, G1/4A BSPP, M12 Connector₹11,089View
Sensata Technologies PTE7300-14AN-1B010BN Pressure Transmitter, Hermetic, Gauge, BSPP, 0-10 bar, G1/4A₹8,029View
Sensata Technologies PTE7300-14AN-1B025BN Pressure Transmitter, Hermetic, Gauge, 0-25 bar, G1/4A BSPP Port₹7,539View
Sensata Technologies PTE7300-24AN-1B050BN Pressure Transmitter, Gauge, 0-50 bar, BSPP G1/4A, Digital I2C₹11,969View
Sensata Technologies PTE7300-24DM-0B050SN Pressure Transmitter, Sealed Gauge, 0-50 bar, 1/4″-18 NPTF, 5-Pin M12 Connector₹12,779View
Sensata Technologies PTE7300-24DM-0B100SN Pressure Transmitter, Sealed Gauge, 0-100 bar, NPTF, 5-Pin M12 Connector₹12,789View
Sensata Technologies PTE7300-34DM-0B200SN Pressure Transmitter, Sealed Gauge, 0-200 bar, 1/4″-18 NPTF, 5-Pin M12 Connector₹10,129View- ₹11,549View
Renke RS-YC-N01-2D Differential Pressure Sensor -10kPa~10kPa with LCD Display & Keypad – RS485 Modbus₹3,689View- ₹6,519View
- ₹1,199View
- ₹199View
- ₹28View
- ₹298View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.

