Component guide · Intermediate · 4 min read
MF58 Glass NTC Thermistors, TE BetaCURVE Precision NTCs

and HW-68 Linear PTC Thermistors
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These are bare thermistors for your own probes and circuit boards. MF58 glass-bead NTCs come in values from 4.7k to 200k and survive up to about 250 degrees C. TE BetaCURVE parts are interchangeable to plus or minus 0.1 to 0.2 degrees C, so no calibration is needed. HW-68 linear PTCs rise in resistance with temperature at a near-constant rate.
Key specs at a glance
- MF58 values
- 4.7k, 10k, 20k, 47k, 50k, 100k, 200k at 25 degrees C
- MF58 beta
- 3435 to 4300 K by value
- TE GA series
- 2.252k, 10k, 22k, 100k with plus or minus 0.1 to 0.2 degrees C interchangeability
- PTC
- 10k or 100k, 3000 to 4500 ppm per degree C
- Package
- Glass DO-35, epoxy bead, micro chip probe
- Range
- About -40 to 250 degrees C (glass)
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1HaiWang MF58 10K 3950 1% NTC Thermistor Temperature Sensor₹29
Option 2HaiWang MF58 100K 4300 1% NTC Thermistor Temperature Sensor₹30
Option 3HaiWang MF58 200K 3950 1% NTC Thermistor Temperature Sensor₹29
Option 4HaiWang MF58 20K 4000 1% NTC Thermistor Temperature Sensor₹29
Option 5HaiWang MF58 4.7K 3435 1% NTC Thermistor Temperature Sensor₹15
Option 6HaiWang MF58 47K 4050 1% NTC Thermistor Temperature Sensor₹29
What the MF58 glass NTC, TE precision NTC and linear PTC thermistors is
MF58 glass-bead NTC thermistors and PTC thermistors are cheap temperature-sensing resistors; NTC resistance falls with heat, PTC rises.
NTC means negative temperature coefficient: resistance falls as it heats. Each value has its own beta, so copy the beta from the product title into your code.
Linear PTCs are useful for temperature compensation in analog circuits because their curve is almost a straight line.
MF58 glass NTC, TE precision NTC and linear PTC thermistors pinout
The pins on the MF58 glass NTC, TE precision NTC and linear PTC thermistors and what each one does.
| Pin | Function |
|---|---|
| Lead 1 | Divider node to the ADC |
| Lead 2 | GND |
- Lead 1
- Divider node to the ADC
- Lead 2
- GND
Wiring the MF58 glass NTC, TE precision NTC and linear PTC thermistors
Glass bodies crack if you bend the leads at the body. Bend at least 2 mm away.
| MF58 glass NTC, TE precision NTC and linear PTC thermistors pin | Arduino Uno | ESP32 |
|---|---|---|
| Thermistor | A0 to GND | GPIO 34 to GND |
| Fixed resistor (same value) | 5 V to A0 | 3.3 V to GPIO 34 |
| Optional 100 nF | A0 to GND | GPIO 34 to GND |
- Thermistor
- Arduino Uno:
- A0 to GND
- ESP32:
- GPIO 34 to GND
- Fixed resistor (same value)
- Arduino Uno:
- 5 V to A0
- ESP32:
- 3.3 V to GPIO 34
- Optional 100 nF
- Arduino Uno:
- A0 to GND
- ESP32:
- GPIO 34 to GND
Example code
For a linear PTC, temperature is about T0 + (R/R0 - 1) / alpha, with alpha = ppm / 1,000,000.
const float R_FIXED = 10000.0; // divider resistor (use 100k for 100k probes)
const float R0 = 10000.0, T0 = 298.15, BETA = 3950.0; // e.g. 3435 for 4.7k, 4300 for MF58 100K 4300
void setup() { Serial.begin(115200); }
void loop() {
int a = analogRead(A0); // probe from A0 to GND, R_FIXED from 5 V to A0
float r = R_FIXED * a / (1023.0 - a);
float tK = 1.0 / (1.0 / T0 + log(r / R0) / BETA);
Serial.print(tK - 273.15, 1); Serial.println(" C");
delay(1000);
}Setup and tuning
put the NTC in a divider with a fixed resistor equal to its 25 °C value (such as 100 kΩ).
read the voltage on an analog pin and convert with the Beta or Steinhart-Hart equation.
use the B value from the datasheet, such as 3950.
PTC thermistors are mainly for over-current or over-temperature protection.
glass beads are fragile; support the leads.
What you need
Shop this list19 of 20 found in our store · ₹21,511
HaiWang MF58 10K 3950 1% NTC Thermistor Temperature Sensor: the part this guide coversHaiWang MF58 10K 3950 1% NTC Thermistor Temperature Sensor₹29
HaiWang MF58 100K 4300 1% NTC Thermistor Temperature Sensor: another version this guide coversHaiWang MF58 100K 4300 1% NTC Thermistor Temperature Sensor₹30
HaiWang MF58 200K 3950 1% NTC Thermistor Temperature Sensor: another version this guide coversHaiWang MF58 200K 3950 1% NTC Thermistor Temperature Sensor₹29
HaiWang MF58 20K 4000 1% NTC Thermistor Temperature Sensor: another version this guide coversHaiWang MF58 20K 4000 1% NTC Thermistor Temperature Sensor₹29
HaiWang MF58 4.7K 3435 1% NTC Thermistor Temperature Sensor: another version this guide coversHaiWang MF58 4.7K 3435 1% NTC Thermistor Temperature Sensor₹15
HaiWang MF58 47K 4050 1% NTC Thermistor Temperature Sensor: another version this guide coversHaiWang MF58 47K 4050 1% NTC Thermistor Temperature Sensor₹29
HaiWang MF58 50K 4150 1% NTC Thermistor Temperature Sensor: another version this guide coversHaiWang MF58 50K 4150 1% NTC Thermistor Temperature Sensor₹15
TE Connectivity GA10K3A1A NTC Thermistor, 10kΩ ±0.1%, 3976K Beta, Through Hole Radial Leaded, -40°C to 125°C: another version this guide coversTE Connectivity GA10K3A1A NTC Thermistor, 10kΩ ±0.1%, 3976K Beta, Through Hole Radial Leaded, -40°C to 125°C₹959
TE Connectivity GA10K4A1A NTC Thermistor, Bead, BetaCURVE Chip, 10 kΩ: another version this guide coversTE Connectivity GA10K4A1A NTC Thermistor, Bead, BetaCURVE Chip, 10 kΩ₹1,039
TE Connectivity GA2.2K3A1IA NTC Thermistor 2.252 kΩ at 25°C, 3976 K Beta, Epoxy Bead, PTFE Leads, ±0.1 °C Accuracy: another version this guide coversTE Connectivity GA2.2K3A1IA NTC Thermistor 2.252 kΩ at 25°C, 3976 K Beta, Epoxy Bead, PTFE Leads, ±0.1 °C Accuracy₹1,179
TE Connectivity GA100K6A1IA BetaCURVE Series II NTC Thermistor, 100 kΩ, Bead Type, PTFE Insulated Leads: another version this guide coversTE Connectivity GA100K6A1IA BetaCURVE Series II NTC Thermistor, 100 kΩ, Bead Type, PTFE Insulated Leads₹719
TE Connectivity GA100K6MCD1 Micro Betachip Thermistor Probe, NTC, 100 kohm: another version this guide coversTE Connectivity GA100K6MCD1 Micro Betachip Thermistor Probe, NTC, 100 kohm₹5,440
TE Connectivity GAG22K7MCD419 NTC Thermistor, 22 kΩ @25°C, B-value 3499 K, Free Hanging Probe, Wire Leaded: another version this guide coversTE Connectivity GAG22K7MCD419 NTC Thermistor, 22 kΩ @25°C, B-value 3499 K, Free Hanging Probe, Wire Leaded₹11,499
HaiWang HW-68 1/4W 10K 4500 PTC-Linear Thermistor: another version this guide coversHaiWang HW-68 1/4W 10K 4500 PTC-Linear Thermistor₹30
HaiWang HW-68 1/6W 100k 4000PPM PTC-Linear Thermistor: another version this guide coversHaiWang HW-68 1/6W 100k 4000PPM PTC-Linear Thermistor₹11
HaiWang HW-68 1/6W 10k 3000PPM PTC-Linear Thermistor: another version this guide coversHaiWang HW-68 1/6W 10k 3000PPM PTC-Linear Thermistor₹29- Uno R3 development board: the controller used in the wiring tableFind this part
ESP32-WROOM-32 38-pin development board: for Wi-Fi logging and dashboardsESP32-WROOM-32 38-Pin Development Board₹389
Metal film resistor 1/4 W 1% (pack of 10): a 10 k reference resistor for the dividerMetal Film Resistor 1/4W 1% (Pack of 10)₹8
Resistor assortment kit (30 values): pull-up and divider resistorsResistor Assortment Kit (30 Values)₹33
Alternatives and when to choose them
- NTC thermistor probes: ready-made sealed probes.
- NTC thermistors: basics and Steinhart-Hart.
- PT100 RTD sensors: linear and very stable.
Common mistakes to avoid
- Wrong fixed resistor value.
- Wrong B value.
- Breaking the glass bead.
- Self-heating from too much current.
Frequently asked questions
How do I convert NTC resistance to temperature?
Use the Beta equation with the 25 °C resistance and B value.
What fixed resistor should I use?
Use a fixed resistor equal to the thermistor's 25 °C resistance, such as 100 kΩ.
What is the difference between NTC and PTC?
NTC resistance falls as temperature rises, while PTC resistance rises.
Why are high-temperature readings inaccurate?
The Beta equation is only approximate over wide ranges; use Steinhart-Hart for better accuracy.
Can MF58 work in a 3D printer hotend?
Yes, glass NTCs like 100K are common in hotends.
Parts for this guide
- ₹29View
- ₹30View
- ₹29View
- ₹29View
- ₹15View
- ₹29View
- ₹15View
TE Connectivity GA10K3A1A NTC Thermistor, 10kΩ ±0.1%, 3976K Beta, Through Hole Radial Leaded, -40°C to 125°C₹959View- ₹1,039View
TE Connectivity GA2.2K3A1IA NTC Thermistor 2.252 kΩ at 25°C, 3976 K Beta, Epoxy Bead, PTFE Leads, ±0.1 °C Accuracy₹1,179View
TE Connectivity GA100K6A1IA BetaCURVE Series II NTC Thermistor, 100 kΩ, Bead Type, PTFE Insulated Leads₹719View- ₹5,440View
TE Connectivity GAG22K7MCD419 NTC Thermistor, 22 kΩ @25°C, B-value 3499 K, Free Hanging Probe, Wire Leaded₹11,499View- ₹30View
- ₹11View
- ₹29View
- ₹359View
- ₹389View
- ₹8View
- ₹33View
- ₹177View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.


