Buying guide · Intermediate · 3 min read
Microchip AVR, SAMD and ATtiny Boards
ATtiny85, ATmega, Xplained and Feather M0/M4
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Microchip makes AVR chips (ATtiny, ATmega) used on Arduino and SAMD ARM chips used on Feather and QT Py boards. ATtiny boards suit tiny, low-cost, low-power projects, ATmega boards are classic 5 V learning platforms, and SAMD21/SAMD51 boards give more speed, memory and CircuitPython. Check the programmer or bootloader before you buy so you can load code.
Key specs at a glance
- ATtiny
- ATtiny85 Digispark, ATtiny88 Nano-style, ATtiny817 Xplained Mini
- ATmega
- ATmega16/32 minimum system boards, ATmega328P
- SAMD21
- Cortex-M0+, 48 MHz: Feather M0, QT Py, Trinket M0
- SAMD51
- Cortex-M4, 120 MHz: Feather M4 Express and CAN
- Programming
- USB bootloader, ISP, UPDI, CMSIS-DAP
- Voltage
- AVR 5 V (or 3.3 V); SAMD 3.3 V
Families at a glance
Pick a family by size, speed and tooling.
| Board | Chip | Good for |
|---|---|---|
| Digispark ATtiny85 | ATtiny85, 8 pins, USB bootloader | Tiny USB gadgets, simple sensors |
| ATtiny88 Nano-style | ATtiny88, more I/O | Compact replacement for small Arduino projects |
| ATmega16/32 ISP board | Classic 40-pin AVR | Learning AVR, C programming, legacy projects |
| ATtiny817 Xplained Mini | Modern tinyAVR with debugger | UPDI programming and debugging |
| Feather M0 / QT Py / Trinket M0 | SAMD21 Cortex-M0+ | CircuitPython and low-power builds |
| Feather M4 Express / CAN | SAMD51 Cortex-M4, 120 MHz | Audio, fast loops, CAN bus |
- Digispark ATtiny85
- Chip:
- ATtiny85, 8 pins, USB bootloader
- Good for:
- Tiny USB gadgets, simple sensors
- ATtiny88 Nano-style
- Chip:
- ATtiny88, more I/O
- Good for:
- Compact replacement for small Arduino projects
- ATmega16/32 ISP board
- Chip:
- Classic 40-pin AVR
- Good for:
- Learning AVR, C programming, legacy projects
- ATtiny817 Xplained Mini
- Chip:
- Modern tinyAVR with debugger
- Good for:
- UPDI programming and debugging
- Feather M0 / QT Py / Trinket M0
- Chip:
- SAMD21 Cortex-M0+
- Good for:
- CircuitPython and low-power builds
- Feather M4 Express / CAN
- Chip:
- SAMD51 Cortex-M4, 120 MHz
- Good for:
- Audio, fast loops, CAN bus
How to program them
- USB bootloader boards (Digispark, Feather) need only a cable and the right board package. - ISP (six-wire) with a USBasp or another Arduino loads bare AVR chips; see debug probes and programmers. - UPDI (one wire) programs modern tinyAVR and megaAVR chips such as the ATtiny817. - SAMD boards use a UF2 bootloader: double-tap reset and drop the file on the drive. Always check which fuses a chip uses; wrong fuse settings can stop the chip from starting.
Which one to choose
For a first board, an Arduino-compatible ATmega328P board is simplest; see Arduino UNO and Arduino Nano. Use an ATtiny when size, price or battery life matters and the program is small. Use SAMD21 or SAMD51 for bigger programs, USB, CircuitPython and higher-speed peripherals. For a standalone chip, read ATmega328P standalone.
Limits to know
An ATtiny85 has only a few I/O pins and little memory, so plan which pins you use for USB, I2C or PWM. 5 V AVR boards need level shifting to talk to 3.3 V SAMD boards; see logic-level shifting. Check the library supports your chip before starting. PIC chips use Microchip's own tools (MPLAB and a PICkit) and are not covered by the Arduino workflow.
Try it: Arduino timer calculator calculator
Change the values and the diagram and results update as you type.
Common mistakes to avoid
- Buying a bare AVR chip without a programmer.
- Connecting 5 V sensors to 3.3 V SAMD pins.
- Setting the wrong fuses.
- Using up the ATtiny pins needed for USB.
- Expecting every Arduino library to run on SAMD or ATtiny.
Frequently asked questions
Is the ATtiny85 good for beginners?
It works, but the small pin count makes the UNO easier to begin with.
What is a Digispark?
A tiny ATtiny85 board with a USB bootloader.
Which SAMD board runs CircuitPython?
Feather M0 Express and M4 Express boards do.
What is UPDI?
A one-wire programming interface for newer AVR chips.
Can I use PIC with Arduino?
Not directly. PIC uses MPLAB and PICkit tools.
Parts for this guide
Calculators
Terms in this guide
Projects that use it
Put this into practice: 1 step-by-step build in our project library uses parts from this guide.
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.






