Component guide · Advanced · 5 min read
Piezoresistive Bridge Pressure Sensors

Sencoch GZP160, GZP168, GZP170, GZP190, GZP191, GZP131, Amphenol NPC-1210, Honeywell 26PC, APR5852, MD-PS002
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
These sensors are Wheatstone bridges: they output a few millivolts that change with pressure, and most are not temperature compensated. You need an amplifier or a bridge ADC such as the HX711 or HX710 to read them, then calibrate zero and span. They are cheap and come in many ranges, which makes them good for blood pressure cuffs, air beds, pumps and pneumatic projects.
Key specs at a glance
- Output
- Millivolts, about 20 to 100 mV full scale at rated supply
- Supply
- 1.8 to 15 V (GZP), 5 to 10 V (26PC, NPC)
- Range
- ±3 kPa to 700 kPa depending on part
- Compensation
- Mostly uncompensated (calibrate in software)
- Package
- DIP-6, SOP-6, SOP-8, SMD or through-hole
- Media
- Dry gas; ceramic WPAH01 handles liquids
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1Sencoch GZP160-101DR Pressure Sensor, -100 kPa~+100 kPa Range, 1.8V~15V Supply, Analog Output, DIP-6 Package₹209
Option 2Sencoch GZP160-010DR Pressure Sensor, -10Kpa~10Kpa Range, Analog Voltage Output, DIP-6 Package₹156
Option 3Sencoch GZP160-040DR Pressure Sensor, -40Kpa~40Kpa Range, 1.8V~15V Supply, DIP-6 Package₹109
Option 4Sencoch GZP160-040S Pressure Sensor, -40Kpa~40Kpa Range, SOP-6 Package₹129
Option 5Sencoch GZP160-101S Analog Pressure Sensor, -100kPa~100kPa, 1.8V~15V, SOP-6 Package₹191
Option 6Sencoch GZP160-201DR Pressure Sensor, 0-200 kPa Range, Analog Output, 1.8-15V Supply, DIP-6 Package₹249
What the Uncompensated piezoresistive pressure sensors is
Piezoresistive bridge pressure sensors are bare pressure dies or packaged sensors with a Wheatstone bridge whose output changes by a few millivolts with pressure.
A bridge sensor has four pins: two for excitation (+ and -) and two outputs (+ and -). The difference between the outputs is the signal.
The HX711, made for load cells, also reads these bridges. Calibrate at zero and at one known pressure, and recheck if the temperature changes a lot.
Uncompensated piezoresistive pressure sensors pinout
The pins on the Uncompensated piezoresistive pressure sensors and what each one does.
| Pin | Function |
|---|---|
| VS+ / VS- | Bridge excitation |
| OUT+ / OUT- | Differential mV output |
| NC | No connection |
- VS+ / VS-
- Bridge excitation
- OUT+ / OUT-
- Differential mV output
- NC
- No connection
Wiring the Uncompensated piezoresistive pressure sensors
Connect the Uncompensated piezoresistive pressure sensors like this.
| Uncompensated piezoresistive pressure sensors pin | Arduino Uno | ESP32 |
|---|---|---|
| VS+ (excitation) | HX711 E+ | HX711 E+ |
| VS- (excitation) | HX711 E- | HX711 E- |
| OUT+ | HX711 A+ | HX711 A+ |
| OUT- | HX711 A- | HX711 A- |
| HX711 DT / SCK | D3 / D2 | GPIO 16 / GPIO 4 |
- VS+ (excitation)
- Arduino Uno:
- HX711 E+
- ESP32:
- HX711 E+
- VS- (excitation)
- Arduino Uno:
- HX711 E-
- ESP32:
- HX711 E-
- OUT+
- Arduino Uno:
- HX711 A+
- ESP32:
- HX711 A+
- OUT-
- Arduino Uno:
- HX711 A-
- ESP32:
- HX711 A-
- HX711 DT / SCK
- Arduino Uno:
- D3 / D2
- ESP32:
- GPIO 16 / GPIO 4
Example code
Apply a known pressure (with a reference gauge) and set scale = raw / kPa.
#include <HX711.h>
HX711 adc;
float zero = 0, scale = 1; // set scale after calibrating at a known pressure
void setup() {
Serial.begin(115200);
adc.begin(3, 2); // DT, SCK
delay(500);
zero = adc.read_average(20); // ports open to air
}
void loop() {
float raw = adc.read_average(5) - zero;
Serial.print("raw "); Serial.print(raw, 0);
Serial.print(" kPa "); Serial.println(raw / scale, 2);
delay(200);
}Setup and tuning
power the bridge with a stable voltage or constant current as the datasheet states.
use an instrumentation amplifier or HX711-style ADC; the signal is only millivolts.
record zero offset and span at known pressures.
output drifts with temperature; compensate using a temperature sensor or the datasheet.
check the sensor is rated for your gas or liquid.
What you need
Shop this list20 of 20 found in our store · ₹11,549
Sencoch GZP160-101DR Pressure Sensor, -100 kPa~+100 kPa Range, 1.8V~15V Supply, Analog Output, DIP-6 Package: the part this guide coversSencoch GZP160-101DR Pressure Sensor, -100 kPa~+100 kPa Range, 1.8V~15V Supply, Analog Output, DIP-6 Package₹209
Sencoch GZP160-010DR Pressure Sensor, -10Kpa~10Kpa Range, Analog Voltage Output, DIP-6 Package: another version this guide coversSencoch GZP160-010DR Pressure Sensor, -10Kpa~10Kpa Range, Analog Voltage Output, DIP-6 Package₹156
Sencoch GZP160-040DR Pressure Sensor, -40Kpa~40Kpa Range, 1.8V~15V Supply, DIP-6 Package: another version this guide coversSencoch GZP160-040DR Pressure Sensor, -40Kpa~40Kpa Range, 1.8V~15V Supply, DIP-6 Package₹109
Sencoch GZP160-040S Pressure Sensor, -40Kpa~40Kpa Range, SOP-6 Package: another version this guide coversSencoch GZP160-040S Pressure Sensor, -40Kpa~40Kpa Range, SOP-6 Package₹129
Sencoch GZP160-101S Analog Pressure Sensor, -100kPa~100kPa, 1.8V~15V, SOP-6 Package: another version this guide coversSencoch GZP160-101S Analog Pressure Sensor, -100kPa~100kPa, 1.8V~15V, SOP-6 Package₹191
Sencoch GZP160-201DR Pressure Sensor, 0-200 kPa Range, Analog Output, 1.8-15V Supply, DIP-6 Package: another version this guide coversSencoch GZP160-201DR Pressure Sensor, 0-200 kPa Range, Analog Output, 1.8-15V Supply, DIP-6 Package₹249
Sencoch GZP160-201S Pressure Sensor -100kPa~200kPa, SOP-6 Package: another version this guide coversSencoch GZP160-201S Pressure Sensor -100kPa~200kPa, SOP-6 Package₹138
Sencoch GZP168-003S Low Pressure MEMS Differential Sensor, -3kPa~+3kPa Range, 1.8-15V DC, SOP-6 Package: another version this guide coversSencoch GZP168-003S Low Pressure MEMS Differential Sensor, -3kPa~+3kPa Range, 1.8-15V DC, SOP-6 Package₹259
Sencoch GZP168-102S Pressure Sensor -100kPa~1000kPa Range, SOP-6 Package: another version this guide coversSencoch GZP168-102S Pressure Sensor -100kPa~1000kPa Range, SOP-6 Package₹204
Sencoch GZP168-701S Pressure Sensor, 0-700 kPa Range, Analog Output, 1.8-15V Supply, SOP-6 Package: another version this guide coversSencoch GZP168-701S Pressure Sensor, 0-700 kPa Range, Analog Output, 1.8-15V Supply, SOP-6 Package₹209
Sencoch GZP170-701A Piezo-Resistive Pressure Sensor, 0-700 kPa, SOP-8 Package: another version this guide coversSencoch GZP170-701A Piezo-Resistive Pressure Sensor, 0-700 kPa, SOP-8 Package₹78
Sencoch GZP190-003S Differential Pressure Sensor, SOP-8 PCB Mount, Analog Output, -3kPa to +3kPa Range: another version this guide coversSencoch GZP190-003S Differential Pressure Sensor, SOP-8 PCB Mount, Analog Output, -3kPa to +3kPa Range₹489
Sencoch GZP190-010S Pressure Sensor, -10Kpa~10Kpa, 1.8V~15V, -30℃~+100℃: another version this guide coversSencoch GZP190-010S Pressure Sensor, -10Kpa~10Kpa, 1.8V~15V, -30℃~+100℃₹359
Sencoch GZP191-010G Plugin Pressure Sensor, 0kPa~10kPa: another version this guide coversSencoch GZP191-010G Plugin Pressure Sensor, 0kPa~10kPa₹549
Sencoch GZP191-101G Pressure Sensor, 0kPa~10kPa, Analog Voltage Output: another version this guide coversSencoch GZP191-101G Pressure Sensor, 0kPa~10kPa, Analog Voltage Output₹519
Sencoch GZP191-201G Plugin Pressure Sensor ROHS, Range 0-200 kPa, Analog Voltage Output: another version this guide coversSencoch GZP191-201G Plugin Pressure Sensor ROHS, Range 0-200 kPa, Analog Voltage Output₹839
Sencoch GZP131-701A Piezoresistive Pressure Sensor Chip, 0-700 kPa, 1.8-15V, SMD-4P: another version this guide coversSencoch GZP131-701A Piezoresistive Pressure Sensor Chip, 0-700 kPa, 1.8-15V, SMD-4P₹46
Amphenol NPC-1210-015A-3S Absolute Pressure Sensor, mV Output, Temperature Compensated, DIP-8, Range: 0-15 PSI (0-103 kPa): another version this guide coversAmphenol NPC-1210-015A-3S Absolute Pressure Sensor, mV Output, Temperature Compensated, DIP-8, Range: 0-15 PSI (0-103 kPa)₹2,609
Honeywell 26PCAFA6G Gauge Pressure Sensor 1 psi – Analog Output, Through-Hole Mount: another version this guide coversHoneywell 26PCAFA6G Gauge Pressure Sensor 1 psi – Analog Output, Through-Hole Mount₹3,299
APR5852 Piezoresistive Differential Pressure Sensor (-10~10kPa Range) – Analog Voltage Output: another version this guide coversAPR5852 Piezoresistive Differential Pressure Sensor (-10~10kPa Range) – Analog Voltage Output₹909
Alternatives and when to choose them
- HX710B modules: sensor and ADC on one board.
- GZP analog sensors: calibrated, amplified.
- Load cells: same bridge idea.
Common mistakes to avoid
- Reading millivolts on a 10-bit ADC.
- Ignoring temperature drift.
- Noisy excitation supply.
- Using it with incompatible media.
Frequently asked questions
Why is the output only millivolts?
Bridge sensors give a small signal that needs amplification.
Can I read it with an Arduino ADC?
Not directly; use an instrumentation amp or a 24-bit ADC like HX711.
Why does the zero drift?
Temperature changes the bridge resistances; measure temperature and compensate in software.
What is excitation voltage?
It is the stable voltage or current applied across the bridge to power it.
Can it measure liquid pressure?
Only if its media rating allows liquids; many bare dies are for dry gas only.
Parts for this guide
Sencoch GZP160-101DR Pressure Sensor, -100 kPa~+100 kPa Range, 1.8V~15V Supply, Analog Output, DIP-6 Package₹209View- ₹156View
- ₹109View
- ₹129View
- ₹191View
- ₹249View
- ₹138View
Sencoch GZP168-003S Low Pressure MEMS Differential Sensor, -3kPa~+3kPa Range, 1.8-15V DC, SOP-6 Package₹259View- ₹204View
- ₹209View
- ₹78View
Sencoch GZP190-003S Differential Pressure Sensor, SOP-8 PCB Mount, Analog Output, -3kPa to +3kPa Range₹489View- ₹359View
- ₹549View
- ₹519View
- ₹839View
- ₹46View
Amphenol NPC-1210-015A-3S Absolute Pressure Sensor, mV Output, Temperature Compensated, DIP-8, Range: 0-15 PSI (0-103 kPa)₹2,609View- ₹3,299View
- ₹909View
- ₹123View
- ₹289View
- ₹79View
- ₹128View
- ₹359View
- ₹389View
- ₹177View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.







