Component guide · Beginner · 5 min read
RunCam Analog FPV Cameras

Phoenix 2, Phoenix 2 SP V3, Pro, JB and Nano, Racer 3 and Racer Nano 3 and 4, Nano 2, 3 and 4, Swift 2, Eagle 2 Pro and Eagle 3, Robin 3, Atom, Night Cam and Phoenix HD
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
RunCam makes many of the analog cameras used on FPV quads. Phoenix 2 and Racer are freestyle and racing cameras with low latency and good WDR. Nano cameras (Nano 2, 3, 4, Racer Nano) are tiny and light for whoops and toothpicks. Eagle 3 and Night Cam are for low light. Size names are Full (28mm), Mini (21mm), Micro (19mm) and Nano (14mm), so match your frame.
Key specs at a glance
- Sizes
- Nano 14mm, Micro 19mm, Mini 21mm, Full 28mm
- Resolution
- 600 to 1200TVL
- Sensor
- CMOS, starlight on Eagle 3 and Night Cam
- Input
- 3.3-5.5V nano, 5-36V on most micro and larger
- Control
- OSD joystick or RunCam UART protocol
- Aspect
- 4:3 or 16:9 switchable on many
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1RunCam ATOM FPV Camera – 800TVL, 1/3″ CMOS, 130° FOV₹1,889
Option 2RunCam EAGLE 3 FPV Camera – 1/2.8″ Starlight CMOS, 1000TVL, 5-36V₹3,199
Option 3RunCam Eagle 2 Pro 800 TVL FPV Camera – Red and Orange₹4,899
Option 4RunCam Eagle 3 Night Vision Camera with OSD₹6,989
Option 5RunCam Lens for Racer Nano 4₹1,591
Option 6RunCam Nano 2 700TVL FPV Camera 2.1mm Lens₹2,129
What the RunCam analog FPV cameras: Phoenix 2, Racer, Nano, Swift 2, Eagle, Robin and Atom is
RunCam analog FPV cameras, such as the Phoenix 2, Night Eagle and Nano series, are low-latency cameras for FPV drones that output analog video to a VTX.
Pick by frame size first, then by use: Phoenix 2 or Racer 3 for 5-inch freestyle and racing, Racer Nano or Nano 4 for small quads, Eagle 3 for dusk and night. Phoenix HD has a short cable for fitting into tight frames.
Match PAL or NTSC to your goggles to avoid rolling or black-and-white video. A wide-input camera can run from the VTX or flight controller 5V; a nano camera must stay on 5V or less.
RunCam analog FPV cameras: Phoenix 2, Racer, Nano, Swift 2, Eagle, Robin and Atom pinout
The pins on the RunCam analog FPV cameras: Phoenix 2, Racer, Nano, Swift 2, Eagle, Robin and Atom and what each one does.
| Pin | Function |
|---|---|
| + / VCC | 5V or 5-36V wide input |
| GND | Ground |
| VIDEO | Composite video to VTX or FC OSD |
| OSD / UART | Camera menu joystick or FC UART (RunCam protocol) |
| MIC | Audio on some models |
- + / VCC
- 5V or 5-36V wide input
- GND
- Ground
- VIDEO
- Composite video to VTX or FC OSD
- OSD / UART
- Camera menu joystick or FC UART (RunCam protocol)
- MIC
- Audio on some models
Wiring the RunCam analog FPV cameras: Phoenix 2, Racer, Nano, Swift 2, Eagle, Robin and Atom
Run camera and VTX from the same clean 5V or VTX output to cut lines in the video.
| RunCam analog FPV cameras: Phoenix 2, Racer, Nano, Swift 2, Eagle, Robin and Atom pin | Connection | Note |
|---|---|---|
| VCC | FC 5V or VTX 5V out | Check range |
| GND | FC GND | Same ground as VTX |
| VIDEO | FC CAM pad | OSD added, then to VTX |
| OSD | FC UART TX/RX | Optional camera control |
- VCC
- Connection:
- FC 5V or VTX 5V out
- Note:
- Check range
- GND
- Connection:
- FC GND
- Note:
- Same ground as VTX
- VIDEO
- Connection:
- FC CAM pad
- Note:
- OSD added, then to VTX
- OSD
- Connection:
- FC UART TX/RX
- Note:
- Optional camera control
Example code
Betaflight can open the RunCam menu from the radio if the camera's UART is wired and the peripheral set to RunCam Device.
1. Wire 5V, GND and VIDEO to the flight controller CAM pads.
2. Match the system: PAL or NTSC on camera, VTX and goggles (PAL is common in India).
3. Pick aspect ratio 4:3 or 16:9 to match your goggles.
4. Open the camera menu (OSD joystick or Betaflight stick commands with RunCam protocol).
5. Set WDR on, turn off camera mirror, set brightness for your light.
6. Tilt the camera 20-40 degrees up for fast flying, less for slow cruising.Setup and tuning
match micro (19 mm) or nano (14 mm) to your frame.
feed the stated voltage range, often 5 to 36 V depending on model.
connect video to the flight controller or VTX video input.
use the camera joystick or Betaflight camera control.
set PAL or NTSC to match your goggles.
What you need
Shop this list20 of 20 found in our store · ₹78,707
RunCam ATOM FPV Camera – 800TVL, 1/3″ CMOS, 130° FOV: the part this guide coversRunCam ATOM FPV Camera – 800TVL, 1/3″ CMOS, 130° FOV₹1,889
RunCam EAGLE 3 FPV Camera – 1/2.8″ Starlight CMOS, 1000TVL, 5-36V: another version this guide coversRunCam EAGLE 3 FPV Camera – 1/2.8″ Starlight CMOS, 1000TVL, 5-36V₹3,199
RunCam Eagle 2 Pro 800 TVL FPV Camera – Red and OrangeRX: another version this guide coversRunCam Eagle 2 Pro 800 TVL FPV Camera – Red and Orange₹4,899
RunCam Eagle 3 Night Vision Camera with OSD: another version this guide coversRunCam Eagle 3 Night Vision Camera with OSD₹6,989
RunCam Lens for Racer Nano 4: another version this guide coversRunCam Lens for Racer Nano 4₹1,591
RunCam Nano 2 700TVL FPV Camera 2.1mm Lens: another version this guide coversRunCam Nano 2 700TVL FPV Camera 2.1mm Lens₹2,129
RunCam Nano 3 800TVL Camera: another version this guide coversRunCam Nano 3 800TVL Camera₹2,329
RunCam Nano 4 FPV Camera – 2.1mm Lens: another version this guide coversRunCam Nano 4 FPV Camera – 2.1mm Lens₹2,259
RunCam Nano 650TVL FPV Camera: another version this guide coversRunCam Nano 650TVL FPV Camera₹1,599
RunCam Night Cam Prototype: another version this guide coversRunCam Night Cam Prototype₹8,756
RunCam Phoenix 2 JB Micro FPV Camera for Quadcopters: another version this guide coversRunCam Phoenix 2 JB Micro FPV Camera for Quadcopters₹4,207
RunCam Phoenix 2 Micro FPV Camera: another version this guide coversRunCam Phoenix 2 Micro FPV Camera₹4,909
RunCam Phoenix 2 Nano Edition 1000 TVL FPV Camera: another version this guide coversRunCam Phoenix 2 Nano Edition 1000 TVL FPV Camera₹3,799
RunCam Phoenix 2 Pro FPV Camera: another version this guide coversRunCam Phoenix 2 Pro FPV Camera₹5,129
RunCam Phoenix 2 SP V3 FPV Camera: another version this guide coversRunCam Phoenix 2 SP V3 FPV Camera₹3,649
RunCam Phoenix 2 Special Edition V2 FPV Camera: another version this guide coversRunCam Phoenix 2 Special Edition V2 FPV Camera₹4,019
RunCam Phoenix HD Camera with 12 cm Cable: another version this guide coversRunCam Phoenix HD Camera with 12 cm Cable₹4,859
RunCam Racer 3 Professional Micro FPV Camera: another version this guide coversRunCam Racer 3 Professional Micro FPV Camera₹2,999
RunCam Racer Nano 3 1.8mm Lens FPV Camera – MCK Edition: another version this guide coversRunCam Racer Nano 3 1.8mm Lens FPV Camera – MCK Edition₹3,349
RunCam Racer Nano 4 FPV Camera: another version this guide coversRunCam Racer Nano 4 FPV Camera₹6,149
Alternatives and when to choose them
- FPV cameras guide: how to choose.
- Foxeer, Caddx and other analog cameras: other brands.
- Analog 5.8GHz VTX: the transmitter.
Common mistakes to avoid
- Over-volting the camera.
- PAL/NTSC mismatch.
- Wrong size for the frame.
- Loose video ground.
Frequently asked questions
Which RunCam is best for night flying?
The Night Eagle series has very sensitive sensors for low light.
Can I power it from battery voltage?
Only if the label lists that voltage range; otherwise use the 5 V pad.
Why is my image black and white?
The camera's PAL or NTSC setting does not match the OSD or goggles.
Can I adjust settings from Betaflight?
Yes, when the camera control wire goes to the flight controller.
Which lens should I choose?
2.1 mm for a normal view, 1.8 mm for wider.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.







