Component guide · Intermediate · 6 min read
Analog FPV VTX

TBS Unify Pro, Pro32, Pro32 Nano and EVO, HGLRC Zeus Nano to 5.5W, AxisFlying SMURFS, ROCK, 3W, 5W and 1.2G 2W, SpeedyBee TX800, Holybro Atlatl HV, XF5804, XF5805, XF5806, TS5823, TS5828, TS832 and TS835
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
An analog VTX sends the FPV camera's video to your goggles on a 5.8GHz channel. Nano VTXs (Unify Pro32 Nano, Zeus Nano) suit small quads at 25 to 350mW; 800mW to 2.5W units suit long range; TS832 and TS5828 are standalone modules for planes and ground robots. SmartAudio or Tramp lets Betaflight change band, channel and power from your radio.
Key specs at a glance
- Band
- 5.8GHz, 40 to 48 channels; AxisFlying 1.2G model on 1.2GHz
- Power
- 25mW up to 5.5W selectable
- Control
- SmartAudio (TBS, Zeus, TX800), Tramp, button
- Input
- 5V or 7-36V (2-6S) on HV models
- Mounting
- 16x16, 20x20, 30x30 or standalone
- Connector
- U.FL, MMCX, SMA or RP-SMA
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1TBS UNIFY PRO 5G8 HV Video Transmitter (SMA)₹3,059
Option 2TBS Unify EVO VTX₹6,499
Option 3TBS Unify Pro 5G8 HV Video Transmitter – RP-SMA₹6,339
Option 4TBS Unify Pro 5G8 V3 Video Transmitter – RP-SMA₹4,749
Option 5TBS Unify Pro 5G8 V3 Video Transmitter – SMA₹4,639
Option 6TBS Unify Pro 5G8 RP-SMA Pigtail (U.FL)₹549
What the Analog 5.8GHz FPV video transmitters: TBS Unify, HGLRC Zeus, AxisFlying, SpeedyBee TX800 and TS58xx is
An analog VTX is the video transmitter on an FPV drone: it sends the camera's picture to your goggles on a 5.8 GHz channel with very low delay.
Always fit an antenna before powering a VTX; transmitting without one can burn the output stage. Start at 25mW on the bench and raise power only in the air.
In India, 5.8GHz use at low power is permitted for short-range devices, but high-power VTXs and 1.2GHz can break licence rules; check current WPC rules before flying above low power. Match the antenna connector (SMA vs RP-SMA) and the polarisation (RHCP or LHCP) to your goggles.
Analog 5.8GHz FPV video transmitters: TBS Unify, HGLRC Zeus, AxisFlying, SpeedyBee TX800 and TS58xx pinout
The pins on the Analog 5.8GHz FPV video transmitters: TBS Unify, HGLRC Zeus, AxisFlying, SpeedyBee TX800 and TS58xx and what each one does.
| Pin | Function |
|---|---|
| VIN / 9V+ | Battery or 5V (by model) |
| GND | Ground |
| VIDEO IN | From camera or FC OSD |
| SA / TRAMP | To a free FC UART TX |
| ANT | U.FL, MMCX or SMA |
- VIN / 9V+
- Battery or 5V (by model)
- GND
- Ground
- VIDEO IN
- From camera or FC OSD
- SA / TRAMP
- To a free FC UART TX
- ANT
- U.FL, MMCX or SMA
Wiring the Analog 5.8GHz FPV video transmitters: TBS Unify, HGLRC Zeus, AxisFlying, SpeedyBee TX800 and TS58xx
Antenna on before power, every time.
| Analog 5.8GHz FPV video transmitters: TBS Unify, HGLRC Zeus, AxisFlying, SpeedyBee TX800 and TS58xx pin | Connection | Note |
|---|---|---|
| VIN | FC VBAT or 9V pad | Check range |
| GND | FC GND | |
| VIDEO | FC VTX pad | OSD added by FC |
| SmartAudio | FC TX3 | Peripherals: TBS SmartAudio |
- VIN
- Connection:
- FC VBAT or 9V pad
- Note:
- Check range
- GND
- Connection:
- FC GND
- VIDEO
- Connection:
- FC VTX pad
- Note:
- OSD added by FC
- SmartAudio
- Connection:
- FC TX3
- Note:
- Peripherals: TBS SmartAudio
Example code
Without the correct VTX table, Betaflight cannot set power levels on most VTXs.
1. Wire the VTX SA pad to a free UART TX on the flight controller.
2. Betaflight Ports: on that UART set Peripherals to VTX (TBS SmartAudio) or VTX (IRC Tramp).
3. Video Transmitter tab: load the VTX table for your model (from the maker's site).
4. Choose band, channel and power, then Save.
5. In the OSD menu or with your radio stick commands, change power in the field.
6. Set Pit mode or 25mW for bench work.Setup and tuning
always connect the antenna before powering the VTX; without one it can burn out.
wire SmartAudio or Tramp to a flight controller UART, then set band, channel and power in the Betaflight VTX table.
use pit mode or the lowest power on the bench so you do not jam others.
check the input range; HV models take battery voltage, nano models often need 5 V from the flight controller.
high power settings get hot. Give the VTX airflow and avoid long bench time at full power.
What you need
Shop this list20 of 20 found in our store · ₹1,20,580
TBS TBS UNIFY PRO 5G8 HV Video Transmitter (SMA): the part this guide coversTBS UNIFY PRO 5G8 HV Video Transmitter (SMA)₹3,059
TBS TBS Unify EVO VTX: another version this guide coversTBS Unify EVO VTX₹6,499
TBS TBS Unify Pro 5G8 HV Video Transmitter – RP-SMA: another version this guide coversTBS Unify Pro 5G8 HV Video Transmitter – RP-SMA₹6,339
TBS TBS Unify Pro 5G8 V3 Video Transmitter – RP-SMA: another version this guide coversTBS Unify Pro 5G8 V3 Video Transmitter – RP-SMA₹4,749
TBS TBS Unify Pro 5G8 V3 Video Transmitter – SMA: another version this guide coversTBS Unify Pro 5G8 V3 Video Transmitter – SMA₹4,639
TBS TBS Unify Pro 5G8 RP-SMA Pigtail (U.FL): another version this guide coversTBS Unify Pro 5G8 RP-SMA Pigtail (U.FL)₹549
TBS Unify Pro32 HV (MMVTXCX) Video Transmitter: another version this guide coversTBS Unify Pro32 HV (MMVTXCX) Video Transmitter₹5,769
TBS Unify Pro32 Nano 5G8 V1.1 Video Transmitter: another version this guide coversTBS Unify Pro32 Nano 5G8 V1.1 Video Transmitter₹3,389
HGLRC 5.8G 5.5W High Power VTX – Black: another version this guide coversHGLRC 5.8G 5.5W High Power VTX – Black₹8,089
HGLRC ZEUS VTX 2.5W: another version this guide coversHGLRC ZEUS VTX 2.5W₹7,570
HGLRC Zeus 800mW Smart Mounting 20×20 / 30×30 VTX: another version this guide coversHGLRC Zeus 800mW Smart Mounting 20×20 / 30×30 VTX₹4,028
HGLRC Zeus Nano VTX 350mW – 16×16 20×20 25.5×25.5mm: another version this guide coversHGLRC Zeus Nano VTX 350mW – 16×16 20×20 25.5×25.5mm₹3,459
HGLRC Zeus VTX PRO 1.6W Video Transmitter: another version this guide coversHGLRC Zeus VTX PRO 1.6W Video Transmitter₹5,441
AxisFlying 1.2G 2W Analog VTX – SMA/RP-SMA: another version this guide coversAxisFlying 1.2G 2W Analog VTX – SMA/RP-SMA₹8,989
AxisFlying 5.8G 3W Analog Video Transmitter (VTX): another version this guide coversAxisFlying 5.8G 3W Analog Video Transmitter (VTX)₹9,149
AxisFlying 5.8G 5W Analog VTX – SMA/RP-SMA: another version this guide coversAxisFlying 5.8G 5W Analog VTX – SMA/RP-SMA₹14,519
AxisFlying ROCK 5.8G 2.5W VTX w/ MLC Anti-Interference: another version this guide coversAxisFlying ROCK 5.8G 2.5W VTX w/ MLC Anti-Interference₹9,959
AxisFlying SMURFS VTX 5.8G 1.6W Analog Video Transmitter: another version this guide coversAxisFlying SMURFS VTX 5.8G 1.6W Analog Video Transmitter₹6,889
SpeedyBee TX800 5.8GHz Video Transmitter: another version this guide coversSpeedyBee TX800 5.8GHz Video Transmitter₹4,327
Holybro Atlatl HV micro (VTX & OSD) – Video Transmitter with MMCX Connector: another version this guide coversHolybro Atlatl HV micro (VTX & OSD) – Video Transmitter with MMCX Connector₹3,169
Alternatives and when to choose them
- FPV VTX guide: how VTXs work.
- 5.8GHz FPV antennas: pick the right antenna.
- 5.8GHz video receivers: ground side.
Common mistakes to avoid
- Powering the VTX without an antenna connected.
- Running high power on the bench until the VTX overheats.
- Flying on the same channel as someone else at a field.
- Feeding a 5 V-only VTX straight from battery voltage.
Frequently asked questions
What power level should I use?
Use 25 mW when flying with others, and higher power only for long range in open areas and within legal limits.
What does SmartAudio do?
SmartAudio lets the flight controller change the VTX channel and power from the OSD or radio, without pressing buttons.
Why does my VTX get very hot on the bench?
VTXs rely on airflow in flight. On the bench use low power or pit mode and keep sessions short.
Can I use an analog VTX with DJI goggles?
Only with goggles or modules that have an analog receiver. DJI goggles need a separate analog module.
Which connector does my VTX use?
Nano VTXs use U.FL or MMCX; larger ones use SMA. Match the antenna connector or use a short pigtail.
Parts for this guide
- ₹3,059View
- ₹6,499View
- ₹6,339View
- ₹4,749View
- ₹4,639View
- ₹549View
- ₹5,769View
- ₹3,389View
- ₹8,089View
- ₹7,570View
- ₹4,028View
- ₹3,459View
- ₹5,441View
- ₹8,989View
- ₹9,149View
- ₹14,519View
- ₹9,959View
- ₹6,889View
- ₹4,327View
- ₹3,169View
- ₹2,049View
- ₹1,259View
- ₹1,669View
- ₹1,729View
- ₹1,349View
- ₹1,259View
- ₹1,249View
- ₹1,537View
- ₹1,509View
- ₹1,739View
- ₹1,689View
- ₹49View
- ₹177View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.













