Component guide · Beginner · 4 min read
5.8GHz FPV Video Receivers

ROTG01 and ROTG01 Pro UVC OTG for Android, Dual 5.8G/2.4G Wi-Fi OTG Receiver, RC832 Plus, RD945 48CH Diversity, DIY RX5808 OLED Diversity, Orqa RapidFIRE and SpeedyBee Goggle Modules and Mini FPV DVR
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
A video receiver picks up the analog 5.8GHz signal from a VTX. ROTG01 plugs into an Android phone over USB OTG and shows video in an app, which is the cheapest way to watch FPV. RC832 and RD945 boxes give composite AV out for a monitor or DVR. RX5808 is the receiver chip inside many builds. Orqa RapidFIRE and SpeedyBee modules slide into analog goggles.
Key specs at a glance
- Band
- 5.8GHz, 40 to 150 channels with auto search
- ROTG01
- UVC over USB-C or micro USB, Android app
- RC832 / RD945
- AV out, 12V, RD945 has diversity
- RX5808
- SPI controlled receiver with OLED UI
- Goggle modules
- RapidFIRE, SpeedyBee for module bays
- DVR
- Records composite video to microSD
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 15.8G and 2.4G 151CH OTG WiFi Dual FPV AV Receiver for IOS & Android Smart Phones – Black₹2,890
Option 2EWRF ROTG01 UVC OTG Android AV Phone Receiver – SMA Female₹7,389
Option 3Eachine ROTG01 Pro UVC OTG 5.8G 150CH FPV Receiver w/ Audio for Android Smartphone – Black₹3,791
Option 4ROTG01 5.8G UVC OTG Android AV Phone Receiver – Upgraded Version₹6,329
Option 5ROTG01 UVC OTG FPV Receiver – White₹9,519
Option 6RC832 Plus 5.8G 48CH Wireless AV Receiver – Black₹4,399
What the 5.8GHz FPV video receivers: ROTG01 OTG, RC832, RD945, RX5808 and goggle modules is
A 5.8 GHz video receiver tunes to an analog VTX channel and turns the signal back into video for a phone, monitor, DVR or goggles.
Use a ROTG01 to let friends watch a flight or to try FPV before buying goggles; set the channel with the auto-search button. Use RC832 or RD945 with a monitor for a ground station on planes and rovers. A goggle module with diversity and better processing (RapidFIRE) gives cleaner video in the same goggles.
The receiver must match the VTX's band and channel, and the antennas must match polarisation. OTG receivers draw power from the phone, so keep the phone charged.
5.8GHz FPV video receivers: ROTG01 OTG, RC832, RD945, RX5808 and goggle modules pinout
The pins on the 5.8GHz FPV video receivers: ROTG01 OTG, RC832, RD945, RX5808 and goggle modules and what each one does.
| Pin | Function |
|---|---|
| USB-C / micro | OTG to phone (ROTG01) |
| AV out | Video and audio to monitor or DVR |
| DC in | 7-12V on RC832, RD945 |
| SMA / RP-SMA | Antenna ports |
| Button | Channel search |
- USB-C / micro
- OTG to phone (ROTG01)
- AV out
- Video and audio to monitor or DVR
- DC in
- 7-12V on RC832, RD945
- SMA / RP-SMA
- Antenna ports
- Button
- Channel search
Wiring the 5.8GHz FPV video receivers: ROTG01 OTG, RC832, RD945, RX5808 and goggle modules
Fit antennas before power, and match the polarisation to the quad's antenna.
| 5.8GHz FPV video receivers: ROTG01 OTG, RC832, RD945, RX5808 and goggle modules pin | Connection | Note |
|---|---|---|
| ROTG01 | Phone OTG port | Use the app |
| RC832 AV | Monitor AV in | Yellow video |
| RC832 DC | 3S battery or 12V | |
| DVR AV in | Receiver AV out | microSD |
- ROTG01
- Connection:
- Phone OTG port
- Note:
- Use the app
- RC832 AV
- Connection:
- Monitor AV in
- Note:
- Yellow video
- RC832 DC
- Connection:
- 3S battery or 12V
- DVR AV in
- Connection:
- Receiver AV out
- Note:
- microSD
Example code
Some phones need OTG turned on in settings. iPhones do not support ROTG01; the dual Wi-Fi receiver works with both.
1. Install the receiver app named in the ROTG01 manual (for example Go FPV).
2. Fit the antenna, plug the ROTG01 into the phone's USB port with OTG.
3. Allow the app to use the USB device.
4. Power the quad's VTX at low power.
5. Press the search button on the ROTG01 to scan and lock the channel.
6. Record from the app if you want a copy.Setup and tuning
run auto search or set the band and channel to match the VTX, for example Raceband R1.
fit the antennas before power-up, using the same polarisation as the VTX.
the ROTG01 needs a phone with USB OTG and UVC support. Install the app it recommends before flying.
RC832 and RD945 run on 12 V; use a 3S pack or a 12 V adapter that is clean and well filtered.
a phone receiver adds a little delay compared with goggles. Fine for watching or slow flying, less ideal for racing.
What you need
Shop this list12 of 12 found in our store · ₹93,033
5.8G and 2.4G 151CH OTG WiFi Dual FPV AV Receiver for IOS & Android Smart Phones – Black: the part this guide covers5.8G and 2.4G 151CH OTG WiFi Dual FPV AV Receiver for IOS & Android Smart Phones – Black₹2,890
EWRF ROTG01 UVC OTG Android AV Phone Receiver – SMA Female: another version this guide coversEWRF ROTG01 UVC OTG Android AV Phone Receiver – SMA Female₹7,389
Eachine ROTG01 Pro UVC OTG 5.8G 150CH FPV Receiver w/ Audio for Android Smartphone – Black: another version this guide coversEachine ROTG01 Pro UVC OTG 5.8G 150CH FPV Receiver w/ Audio for Android Smartphone – Black₹3,791
ROTG01 5.8G UVC OTG Android AV Phone Receiver – Upgraded Version: another version this guide coversROTG01 5.8G UVC OTG Android AV Phone Receiver – Upgraded Version₹6,329
Generic ROTG01 UVC OTG FPV Receiver – White: another version this guide coversROTG01 UVC OTG FPV Receiver – White₹9,519
RC832 Plus 5.8G 48CH Wireless AV Receiver – Black: another version this guide coversRC832 Plus 5.8G 48CH Wireless AV Receiver – Black₹4,399
RD945 FPV Wireless 5.8GHz 48CH Receiver: another version this guide coversRD945 FPV Wireless 5.8GHz 48CH Receiver₹7,779
DIY RX5808 5.8G 40CH Diversity FPV Receiver with OLED Display: another version this guide coversDIY RX5808 5.8G 40CH Diversity FPV Receiver with OLED Display₹2,571
Orqa RapidFIRE 5.8GHz FPV VRX Module with Dual Signal Processing: another version this guide coversOrqa RapidFIRE 5.8GHz FPV VRX Module with Dual Signal Processing₹35,279
SpeedyBee 5.8GHz FPV Goggles Receiver Module: another version this guide coversSpeedyBee 5.8GHz FPV Goggles Receiver Module₹10,169
Mini DVR Audio Video Recorder for FPV RC Drones – Black or OrangeRX: another version this guide coversMini DVR Audio Video Recorder for FPV RC Drones – Black or Orange₹2,869
Dupont jumper wires: for the connectionsDupont Jumper Wires (40 pcs)₹49Closest match, check the specs
Alternatives and when to choose them
- FPV goggles and video receivers: goggles overview.
- Analog 5.8GHz VTX: the transmit side.
- 5.8GHz FPV antennas: improve range.
Common mistakes to avoid
- Expecting an analog receiver to show digital HD video.
- Using an iPhone with the ROTG01, which is Android only.
- Powering the receiver box from a noisy supply, which adds lines to the picture.
- Using antennas with the wrong polarisation.
Frequently asked questions
Will the ROTG01 work on an iPhone?
No. It relies on Android USB OTG and UVC support, so use an Android phone or a small monitor instead.
What is diversity on a video receiver?
Diversity uses two receivers and antennas and picks the stronger signal, which reduces breakups.
Can I record the flight video?
Yes. Connect a DVR to the AV output of an RC832 or RD945, or record in the phone app with the ROTG01.
Does a 5.8 GHz receiver work with DJI or Walksnail digital video?
No. These receivers decode analog video only; digital systems need their own goggles or receivers.
Why do I see only snow on every channel?
Check that the VTX is powered and not in pit mode, the antennas match, and the receiver is scanning the right band.
Parts for this guide
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
