Component guide · Advanced · 3 min read
Safety Laser Scanners

SICK S30A, S32B, nanoScan3, IDEC SE2L) and StanBon Light Curtain
By Geekobot Learning Team · Updated 29 Oct 2026
On this page
Safety laser scanners watch an area around a machine or AGV and stop it when a person enters a protective field. The SICK S30A, S32B, nanoScan3 and IDEC SE2L are certified Type 3, SIL2 devices with configurable field sets. A light curtain like the StanBon STD20-28NC makes an invisible fence of 28 beams across an opening. Both connect through safety (OSSD) outputs to a safety relay or PLC.
Key specs at a glance
- Safety rating
- Type 3, SIL2, PL d (scanners)
- Protective range
- About 3 to 5.5 m
- Scan angle
- 190 to 275 degrees
- Outputs
- Two OSSD outputs, PNP
- Light curtain
- 28 beams, 20 mm pitch, 540 mm height
- Supply
- 24 V DC
Models in this guide
These are alternatives. Pick the one that fits your project; you only need one.
Option 1SICK S32B-2011EA Safety Laser Scanner, 270° Beam Angle, 48 Field Pair, Type 3, SIL2, IP65, Sensing Range: 30m₹8,52,539
Option 2SICK S32B-3011EA Safety Laser Scanner, 270° Beam Angle, 48 Field Pair, Type 3, SIL2, IP65, Sensing Range: 30m₹8,99,349
Option 3SICK S30A-6011BA Safety Laser Scanner, 190° Beam Angle, 4 Field Pair, Type 3, SIL2, IP65, Sensing Range: 49m₹13,17,039
Option 4SICK NANS3-CAAZ30IZ1 Safety Laser Scanner, 275° Beam Angle, 128 Field Pairs, Type 3, SIL2, IP65, Sensing Range: 40m₹5,94,229
Option 5IDEC SE2L-HA05LPC Safety Laser Scanner, 270° Beam Angle, 5m Sensing Range, SIL2₹8,93,081
Option 6StanBon STD20-28NC Light Curtain Sensor, 28 Beams, 20mm Pitch, 540mm Height, 12-24V DC₹12,349
What the Safety laser scanners and light curtains is
Safety laser scanners and light curtains, from SICK, Omron, Keyence and others, are certified safety devices that stop machines or AGVs when a person enters a protected zone.
OSSD outputs are two redundant signals that turn off when the field is broken. Wire both to a safety relay or safety PLC, not to an ordinary microcontroller.
Fields are set with the maker's software (SICK Safety Designer, IDEC tool). A trained person must validate the safety function.
Safety laser scanners and light curtains pinout
The pins on the Safety laser scanners and light curtains and what each one does.
| Pin | Function |
|---|---|
| 24 V, 0 V | Supply |
| OSSD1, OSSD2 | Safety outputs |
| EDM | External device monitoring |
| Field set inputs | Switch field sets |
- 24 V, 0 V
- Supply
- OSSD1, OSSD2
- Safety outputs
- EDM
- External device monitoring
- Field set inputs
- Switch field sets
Wiring the Safety laser scanners and light curtains
Connect the Safety laser scanners and light curtains like this.
| Safety laser scanners and light curtains pin | Safety relay | Safety PLC |
|---|---|---|
| 24 V / 0 V | 24 V safety supply | 24 V supply |
| OSSD1 / OSSD2 | Safety relay inputs | Safety PLC inputs |
| EDM | Relay feedback contacts | PLC feedback |
- 24 V / 0 V
- Safety relay:
- 24 V safety supply
- Safety PLC:
- 24 V supply
- OSSD1 / OSSD2
- Safety relay:
- Safety relay inputs
- Safety PLC:
- Safety PLC inputs
- EDM
- Safety relay:
- Relay feedback contacts
- Safety PLC:
- PLC feedback
Example code
A minimal sketch to check the part works.
1. Plan the protective field from the machine's stopping time and approach speed.
2. Configure fields in the maker's software and download to the scanner.
3. Wire OSSD1 and OSSD2 to a safety relay with EDM feedback.
4. Test with the test rod at every edge of the field.
5. Record the validation and keep the configuration file.Setup and tuning
use only devices with the required safety rating (such as PL d / SIL 2) for your risk assessment.
connect the OSSD safety outputs to a safety relay or safety PLC, never to a normal input alone.
configure protective and warning fields with the vendor software.
mount at the safety distance calculated from machine stopping time (ISO 13855).
test the stop function daily and after any change.
What you need
Shop this list8 of 8 found in our store · ₹45,69,061
SICK S32B-2011EA Safety Laser Scanner, 270° Beam Angle, 48 Field Pair, Type 3, SIL2, IP65, Sensing Range: 30m: the part this guide coversSICK S32B-2011EA Safety Laser Scanner, 270° Beam Angle, 48 Field Pair, Type 3, SIL2, IP65, Sensing Range: 30m₹8,52,539
SICK S32B-3011EA Safety Laser Scanner, 270° Beam Angle, 48 Field Pair, Type 3, SIL2, IP65, Sensing Range: 30m: another version this guide coversSICK S32B-3011EA Safety Laser Scanner, 270° Beam Angle, 48 Field Pair, Type 3, SIL2, IP65, Sensing Range: 30m₹8,99,349
SICK S30A-6011BA Safety Laser Scanner, 190° Beam Angle, 4 Field Pair, Type 3, SIL2, IP65, Sensing Range: 49m: another version this guide coversSICK S30A-6011BA Safety Laser Scanner, 190° Beam Angle, 4 Field Pair, Type 3, SIL2, IP65, Sensing Range: 49m₹13,17,039
SICK NANS3-CAAZ30IZ1 Safety Laser Scanner, 275° Beam Angle, 128 Field Pairs, Type 3, SIL2, IP65, Sensing Range: 40m: another version this guide coversSICK NANS3-CAAZ30IZ1 Safety Laser Scanner, 275° Beam Angle, 128 Field Pairs, Type 3, SIL2, IP65, Sensing Range: 40m₹5,94,229
IDEC SE2L-HA05LPC Safety Laser Scanner, 270° Beam Angle, 5m Sensing Range, SIL2: another version this guide coversIDEC SE2L-HA05LPC Safety Laser Scanner, 270° Beam Angle, 5m Sensing Range, SIL2₹8,93,081
StanBon STD20-28NC Light Curtain Sensor, 28 Beams, 20mm Pitch, 540mm Height, 12-24V DC: another version this guide coversStanBon STD20-28NC Light Curtain Sensor, 28 Beams, 20mm Pitch, 540mm Height, 12-24V DC₹12,349
SMPS power supply in metal enclosure (5/12/24 V): a 12 V or 24 V supplySMPS Power Supply, Metal Enclosure (5V / 12V / 24V)₹298Closest match, check the specs
Digital multimeter: to check supply and signal voltagesDigital Multimeter₹177
Alternatives and when to choose them
- Industrial 2D LiDAR: navigation, not safety rated.
- Photoelectric sensors: non-safety detection.
- RPLIDAR: mapping.
Common mistakes to avoid
- Wiring OSSD outputs to a normal PLC input alone.
- Mounting closer than the safety distance.
- Skipping daily function tests.
- Using non-certified sensors for safety.
Frequently asked questions
What is an OSSD output?
Output signal switching device: two redundant safety outputs that turn off when the zone is entered.
Can I connect a light curtain to an Arduino?
Not for safety. Use a certified safety relay or safety PLC.
How far from the hazard should a light curtain be?
At the safety distance calculated from stopping time and approach speed under ISO 13855.
What is the difference between a light curtain and a laser scanner?
Light curtains guard an opening; laser scanners guard an area on the floor.
Who should install these devices?
A qualified person after a risk assessment, following the standards.
Parts for this guide
SICK S32B-2011EA Safety Laser Scanner, 270° Beam Angle, 48 Field Pair, Type 3, SIL2, IP65, Sensing Range: 30m₹8,52,539View
SICK S32B-3011EA Safety Laser Scanner, 270° Beam Angle, 48 Field Pair, Type 3, SIL2, IP65, Sensing Range: 30m₹8,99,349View
SICK S30A-6011BA Safety Laser Scanner, 190° Beam Angle, 4 Field Pair, Type 3, SIL2, IP65, Sensing Range: 49m₹13,17,039View
SICK NANS3-CAAZ30IZ1 Safety Laser Scanner, 275° Beam Angle, 128 Field Pairs, Type 3, SIL2, IP65, Sensing Range: 40m₹5,94,229View- ₹8,93,081View
- ₹12,349View
- ₹298View
- ₹177View
Keep learning
Sources
Written by the Geekobot team from manufacturer datasheets. Always check the datasheet for the exact part and variant you buy.
